Inhaltszusammenfassung zur Seite Nr. 1
KF-AH
AdjustAble Hyperextension
Owner’s Manual
215-00217
03/07 Rev A
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Before You Start 3 Important Safety Information 4 Assembly 5 - 11 Parts List 1 Exploded View 13 Warranty Information 14
Inhaltszusammenfassung zur Seite Nr. 3
Before You Start THANK YOU for making this unit a part of your exercise program. Keys Fitness assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have trained service techni- cians on site to take care of you, our valued customer. REGISTRATION CARd To avoid unnecessary delays i
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Information Prior to assembly, remove components from the box and verify that all the listed parts were supplied. Read all precautions and instructions in this manual before using this equipment. WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or pr
Inhaltszusammenfassung zur Seite Nr. 5
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. 39 3 36 39 36 2 39 36 36 1 30 39 36 36 30 36 30 STEP 1 Attach U-Shaped Base () to Main Frame (3) using Bolts M10X80 (30), Washers M10 (36), and Nylon Lock Nuts M10 (39). Attach Base Frame (1) to Main Frame (3) using Bolts M10X80 (30), Washers M10 (36), and Nylon Lock Nuts M10 (39). 5
Inhaltszusammenfassung zur Seite Nr. 6
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. 3 9 5 39 36 9 6 36 29 STEP 2 Connect Swivel Frame A (5) to Main Frame (3) using Pivot Axle (9), Bolt M10X110 (9), Washers M10 (36), and Nylon Lock Nut M10 (39). Slide Adjustable Frame (6) into Swivel Frame A (5) and secure in place using the orange pop pin. Insert Pivot Axle (9) into the top of Adjustable Frame (6). 6
Inhaltszusammenfassung zur Seite Nr. 7
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. 38 35 39 4 36 35 28 36 30 3 7 39 36 36 29 6 STEP 3 Attach Swivel Frame B (7) to Adjustable Frame (6) using Bolt M10X110 (9), Washers M10 (36), and Nylon Lock Nut M10 (39). Attach Pad Support (4) first to Swivel Frame B (7) using Bolts M10X80 (30), Washers M10 (36), and Nylon Lock Nut M10 (39). Now secure the pad support to Main Frame (3) using Bolt M1X105 (8), Washers M1 (35), and Nylon Lock Nut M1 (38)
Inhaltszusammenfassung zur Seite Nr. 8
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. 7 8 12 39 39 36 31 36 31 STEP 4 Attach Foam Frame (8) to Adjustable Tube (1) using Bolts M10X65 (31), Washers M10 (36), and Nylon Lock Nuts M10 (39). Slide Adjustable Tube (1) into Swivel Frame B (7) and secure using orange pop pin. 8
Inhaltszusammenfassung zur Seite Nr. 9
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. 20 18 18 20 STEP 5 Slide a Foam Roller (18) onto each side of Foam Frame (8). Use a rubber mallet to secure Big Plugs (0) into foam frame shafts. 9
Inhaltszusammenfassung zur Seite Nr. 10
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. 14 13 4 36 32 36 36 32 32 36 32 STEP 6 Install Chest Pads A & B (13 & 14) onto Pad Support (4) using Bolts M10X30 (3) and Washers M10 (36). Tighten all hardware securely. 10 10
Inhaltszusammenfassung zur Seite Nr. 11
Assembly Congratulations! You have completed the assembly of your new KF-AH 11 11
Inhaltszusammenfassung zur Seite Nr. 12
Exploded View 1 12 12 15 14 13 15 16 4 38 35 35 16 28 20 39 36 18 36 16 36 19 17 36 16 32 7 30 32 36 17 36 8 32 33 19 37 22 23 32 11 27 36 18 24 25 37 20 33 33 39 39 25 36 36 37 39 3 21 19 24 22 39 36 39 36 36 36 27 29 36 23 31 2 36 37 34 33 21 39 26 36 33 24 37 30 19 26 12 39 9 5 23 36 36 37 21 29 33 37 24 33 36 10 1 19 34 30 21 23 37 33 6 26 26 9
Inhaltszusammenfassung zur Seite Nr. 13
Parts list KF-AH Parts list Rev A Ref # Part # description Qty 1 223-01210 BASE FRAME, KF-AH 1 2 223-01211 BASE FRAME, U KF-AH 1 3 223-01213 MAIN FRAME, KF-AH 1 4 223-01214 SUPPORT, PAD KF-AH 1 5 223-01215 FRAME, SWIVEL A KF-AH 1 6 223-01216 FRAME, ADJUSTABLE KF-AH 1 7 223-01217 FRAME, SWIVEL B KF-AH 1 8 223-01218 FRAME, FOAM KF-AH 1 9 210-00270 AXLE, PIVOT KF-AH 2 10 210-00257 POP PIN 1 11 210-00271 POP PIN, LOCKING KF-AH 1 12 210-00272 TUBE, ADJUSTABLE KF-AH 1 13 228-00198 CHEST PAD, LEFT 1 14
Inhaltszusammenfassung zur Seite Nr. 14
Warranty Information KEYS FITNESS PRODUCTS, L.P. LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty is non-transferable and valid only to the original purchaser. Keys warrants that the Product you have purchased for non-commercial, personal, family, or household use from Keys or from an authorized Keys reseller is free from defects in materials or workman
Inhaltszusammenfassung zur Seite Nr. 15
Keys Fitness Products, l.P. 4009 distribution drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482
