Bedienungsanleitung ATD Tools 5597

Inhaltszusammenfassung zur Seite Nr. 1

Model 5597

Input Limits

Function Maximum Input
OPERATING INSTRUCTIONS
A AC 1000A
1000A DC/AC CLAMP METER
V DC, V AC 600V DC/AC

Resistance, Diode, Continuity, Capacitance, 250V DC/AC
Safety
Frequency, Duty Cycle, Test
International Safety Symbols 60V DC/24V AC
Temperature ( ℃/ ℉)

This symbol, adjacent to another symbol or terminal, indicates the user must refer
to the manual for further information.
Meter Description

This s

Inhaltszusammenfassung zur Seite Nr. 2

n n Diode Test Test current of 0.3mA typical; Open circuit voltage 1.5V DC typical. Continuity Check Threshold <100Ω; Test current < 1mA Low Battery Indication “ BAT ” is displayed Specifications Overrange Indication “OL” is displayed Function Range & Resolution Accuracy (% of reading) Measurements Rate 2 per second, nominal 40.00 AAC ± (2.8% + 10 digits) Input Impedance 7.8MΩ (VDC and VAC) DC Current 400.0 AAC ± (2.8 % + 5

Inhaltszusammenfassung zur Seite Nr. 3

Resistance and Continuity Measurements 4. Touch the Temperature Probe head to the surface area you wish to measure. Keep 1. Insert the black test lead into the negative COM terminal and the the probe touching the part under test until the reading stabilizes (about 30 seconds). 5. Read the temperature in the display. The digital reading will indicate the proper red test lead into the positive terminal. decimal point and value. 2. Set the function switch to the •))) Ω position.