Bedienungsanleitung Harbor Freight Tools 91033

Inhaltszusammenfassung zur Seite Nr. 1

PROPANE TORCH
MODEL 91033
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http//www.harborfreight.com
®
Copyright 2003 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.

Inhaltszusammenfassung zur Seite Nr. 2

PRODUCT SPECIFICATIONS Item Description Product Compatibility Designed for Use with Standard 20 Lbs., Barbeque L.P. (Propane) Tanks Overall Length 23” without Hose Wand Length 21-1/2” Maximum BTU’s 500,000 Maximum Flame Temperature 3,500 Degrees Hose Length 6 Ft. 6” Hose Fittings 14 T.P.I. x .089” Diameter Handle Fitting 1/2” O.D., L.H. Threaded Male Propane Tank Connection Hose Working P.S.I. 350 Lbs Hose Burst P.S.I. 525 Lbs Weight 3.45 Lbs Accessories 17 MM Open End Wrench (Qt

Inhaltszusammenfassung zur Seite Nr. 3

are impaired while taking drugs. If there is any doubt, do not attempt to use this product. 5. Use eye and hand protection. Wear ANSI approved safety impact eye goggles and flame retardant gloves when using this product. ANSI approved safety impact eye goggles and flame retardant gloves are available from Harbor Freight Tools. 6. Dress safely. Do not wear loose clothing or jewelry, as they can become caught in moving parts or come in contact with open flames. Wear a protective hair covering

Inhaltszusammenfassung zur Seite Nr. 4

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding work space. Always keep the area free of obstruc- tions, grease, oil, trash, and other debris. Do not use the Propane Torch in areas near flammable chemicals, dusts, and vapors. Be aware of wind blown sparks. Do not use the Propane Torch around or near buildings and structures. 2. The Propane Torch is for outdoor use only. Use the Propane To

Inhaltszusammenfassung zur Seite Nr. 5

11. Never use gasoline, kerosene, or other highly volatile fluids as a starter as they can explode. 12. Dress safely. Do not wear loose clothing such as hanging shirt tails and coats. Wear a protective hair covering to keep long hair away from heat and flames. Use ANSI approved safety impact goggles and flame retardant gloves to avoid burns. 13. Never leave the Propane Torch unattended once it is lit. 14. Keep a fire extinguisher handy. Always keep a commercial fire extinguisher nearby the Pro

Inhaltszusammenfassung zur Seite Nr. 6

PRODUCT FEATURES 1. The Propane Torch is ideal for de-icing, removing paint (only from non-flammable surfaces), removing weeds (only in a controlled, safe environment, and softening as- phalt for removal or patching. In addition, the Propane Torch easily attaches to standard 20 Lbs., Barbeque L.P. (propane) tanks (not included). ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: For additional references to the parts listed in the following pages, refer to the Assembly Diagram (page 8). NOTE: Always ch

Inhaltszusammenfassung zur Seite Nr. 7

6. Adjust the flame to the desired level by turning the Hand Wheel (6) counterclockwise. (See Figure A.) 7. NOTE: The lit Propane Torch should operate with a blue flame with a small yellow tip. If necessary, adjust the Hand Wheel (6) if there is sputtering or popping. (See Figure A.) 8. Pressing the Lever (19) down toward the Handle (11) will intensify the size of the flame. Releasing the Lever will bring the flame back to its previous size. (See Figure A.) Caution: Be extra careful when

Inhaltszusammenfassung zur Seite Nr. 8

PARTS LIST Part # Description Part # Description 1 Burner (Turbo 060) 13 Packing 2 Nozzle Hole 14 O-Ring 3 Nozzle Connector 15 Nut (M4) 4 Steel Tube Extension 16 Piston Lever 5 O-Ring 17 Jamming Piston Nut 6 Hand Wheel 18 Jamming Lever Pin 7 Nut (M4) 19 Lever 8 Needle Guide Nut 20 Steel Spring 9 Tap Casing 21 Hose 10 Iron Tube 22 Clip 11 Handle 23 Handle Connector 12 Hose Connector 24 Cylinder Connector ASSEMBLY DIAGRAM 7 6 11 10 9 12 5 13 8 2 17 16 18 14 15 20 4 19 3 23 1 22 21 22 24 NOTE: Some