Inhaltszusammenfassung zur Seite Nr. 9
2. Press Mod E to toggle between UVI / Barometer / the wind level is shown by a series of icons: Rainfall readings. The corresponding icon will appear: ICoN LEVEL dESCRIPtIoN UVI BARoMEtER RAINFALL N/A <2 miles/h (<4km/h) Light 2-8 miles/h (3-3 km/h) t o select the measurement unit for the barometer or rainfall readings: Moderate 9-25 miles/h (4-4 km/h) In the UV / Barometer / Rainfall Area, press UNIt to switch between: Strong 26-54 miles/h (42-87 km/h) • Barometer: Millimeters of mercury
Inhaltszusammenfassung zur Seite Nr. 10
RAINFALL RAdIo-CoNtRoLLEd / AtoMIC CLoCk t o view the recorded rainfall of the current hour or Synchronization Auto or disabled last 24 hours: Clock display HH:MM:SS . Press SELECt to navigate to the UVI / Barometer / Hour format 2hr AM/PM or 24hr Rainfall Area. will show next to the Area. Calendar DD/MM or MM/DD 2. Press ModE repeatedly to select Rainfall display. Weekday in 6 3. Press MAX / MIN repeatedly to toggle between (E, D, F, I, S, R) languages current hour or past 24 hour rain
Inhaltszusammenfassung zur Seite Nr. 11
PRECAUtIoNS FCC StAtEMENt This device complies with Part 5 of the FCC Rules. • Do not subject the unit to excessive force, shock, Operation is subject to the following two conditions: () dust, temperature or humidity. • Do not cover the ventilation holes with any items such This device may not cause harmful interference, and (2) This device must accept any interference received, as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid including interference tha
Inhaltszusammenfassung zur Seite Nr. 1
Wireless PC-connected Professional
INtRodUCtIoN
Weather Station
Thank you for selecting the Oregon Scientific™ Wireless
PC-connected Professional Weather Station (WMR80
Model: WMR180 / WMR180A
/ WMR80A).
The base station is compatible with other sensors. To
purchase additional sensors, please contact your local
USER MANUAL
retailer.
Sensors with this logo are compatible with this unit.
CoNtENtS
Introduction ................................................................1 NotE Please
Inhaltszusammenfassung zur Seite Nr. 2
1 2 3 4 5 6 1 2 3 B 4 C A D 1 2 7 8 3 9 4 10 5 6 11 LIGHT 1 2 3 4 5 6 WMR180_UM_EN_R7.indd 2 2011/5/30 3:56:30 PM E U/UK
Inhaltszusammenfassung zur Seite Nr. 3
SEARCH B Wind Speed / Wind direction / Wind Chill Area RAIN GAUGE 1 Base and funnel: 2 3 2 1 3 4 5 6 . Wind speed reading (m/s, kph, mph or knots) 2. Outdoor wind sensor battery is low . Rain gauge 3. Wind speed level indicator 2. Battery compartment 4. Wind speed level description 3. RESEt button 5. Minimum wind chill is displayed 6. Wind direction display 1 C UVI / Barometer / Rainfall Area 1 2 1 3 2 4 . Funnel 2. Indicator 5 6 7 . UVI / barometer / rainfall reading is displayed oUtdo
Inhaltszusammenfassung zur Seite Nr. 4
Front view: . LED indicator: blinks rapidly during search or slowly 5 to indicate unsuccessful search; continuous light indicates a successful connection Back view: . SEARCH: initiate search for base station 4 2. RESEt : reset USB Communications Hub to default settings 4. Insert sensor into the casing, twist and click to the 3. USB port: upload records to PC right to secure. 5. Slide temperature and humidity sensor onto the smaller GEttING StARtEd end of the sensor connector. NotE Insta
Inhaltszusammenfassung zur Seite Nr. 5
• Wind direction indicator. Move the direction of the To completely disconnect from power, unplug adaptor wind indication and verify the icon moves in the same from the mains. direction . t o insert batteries: tEMPERA tURE / HUMIdItY SENSoR . Slide open the battery door. 2. Insert the batteries, matching the polarities (+ / -). 3. Press RESEt after each battery change. . Press SELECt until the selected area icon is in the 4. Close the battery door. bottom left display area. 2. Press UP /
Inhaltszusammenfassung zur Seite Nr. 6
• Make sure the USB communications hub is not 11 obstructed and is easily accessible to the computer. • To completely disconnect from power, the USB should be disconnected from the PC. • This product should be supplied by an identical USB port complying with the requirements of Limited Power Source. MoUNtING / PLACING oF SENSoRS REMot E WINd SENSo R o N EXISt ING Po LE . Plug the other solar panel cables into the socket on the wind vane. 3 1 2 . Secure the plastic base onto existing pol
Inhaltszusammenfassung zur Seite Nr. 7
If water remains on -4, the gauge is not horizontal. . Press SELECt to navigate to the Clock Area. will If necessary, adjust the level using the screw. show next to the Area. 2. Press and hold ModE to change the clock setting. The setting will blink. 3. Press UP / doWN to increase / decrease the setting value. 4. Press ModE to confirm. 5. Repeat steps 3 to 4 to set the time zone offset hour (+ / -23 hours), 2 / 24 hour format, hour, minute, year, date / month format, month, date and we
Inhaltszusammenfassung zur Seite Nr. 8
Southern hemisphere The timestamp records the date and time when storing the temperature and humidity readings in memory. New Full Moon Moon t o select the temperature measurement unit: Waxing Waning Press UNIt to select °C / °F. Crescent Gibbous First Third NotE The unit of all temperature related displays will quarter quarter be changed simultaneously. Waxing Waning t o view temperature (Current / Max / Min temperature) Gibbous Crescent readings: . Press SELECt to navigate to the Tempe
