Inhaltszusammenfassung zur Seite Nr. 1
Full Weather Station with Radio Controlled
Clock (Model #: PS-M01 / PS-M01U)
User Manual
PS M01 English Cover R7 op 1 7/24/03, 10:42 AM
Black
EN
Inhaltszusammenfassung zur Seite Nr. 2
Reset system ........................................................... 18 TABLE OF CONTENTS Safety and care ....................................................... 18 About this guide ........................................................ 2 Warnings ................................................................. 19 Product overview ....................................................... 3 Troubleshooting ....................................................... 20 Getting started ...........
Inhaltszusammenfassung zur Seite Nr. 3
In this box, you will find: ABOUT THIS GUIDE Congratulations on your selection of the Philippe Starck • Main unit with Oregon Scientific Full Weather Station with Radio- • Remote sensor Controlled Clock (PS-M01 / PS-M01U). This powerful • Batteries device bundles time keeping, alarm, indoor and • AC/DC power adapter wireless outdoor temperature and humidity monitoring, and weather forecasting into a single tool you can use from the convenience of your home. Keep this manual handy as you use your
Inhaltszusammenfassung zur Seite Nr. 4
PRODUCT OVERVIEW DESCRIPTIONS 1. Snooze / Light button TOP VIEW 2. Light sensor 1 2 3 PS M01 English R17 op 3 7/24/03, 10:57 AM Black EN
Inhaltszusammenfassung zur Seite Nr. 5
LCD DISPLAY DESCRIPTIONS 1 1. Low battery icon 2. Clock 3. Barometer 4. Weather forecast 5. Moon phase 2 6. Calendar 7. Temperature and humidity 3 7 8. Alarm 4 8 5 6 4 PS M01 English R17 op 4 7/24/03, 10:57 AM Black EN
Inhaltszusammenfassung zur Seite Nr. 6
BACK VIEW BUTTON DESCRIPTIONS 1. Select - switch modes / change settings 2. Up - increase setting / activate auto-synch 3. Down - decrease setting / deactivate auto-synch 4. Channel - switch remote unit 4 1 5. Alarm - activate / deactivate alarm 5 2 3 5 PS M01 English R17 op 5 7/24/03, 10:57 AM Black EN
Inhaltszusammenfassung zur Seite Nr. 7
BOTTOM AND SIDE VIEW DESCRIPTIONS 1. Battery compartment 2. Backlight switch 3. Reset button 4. Light sensitvity knob 5. DC Power input jack 1 2 3 4 NOTE AC power adapter not shown. 5 6 PS M01 English R17 op 6 7/24/03, 10:57 AM Black EN
Inhaltszusammenfassung zur Seite Nr. 8
REMOTE UNIT DESCRIPTIONS 1 1. Temperature / Trend display 4 2 2. Low battery icon 5 3. Humidity / Trend / Comfort Level display 6 4. °C/°F switch 5. Channel switch 7 3 6. Reset button 7. Battery compartment 8. Wall-Mount hole 9. Battery compartment lid 8 9 7 PS M01 English R17 op 7 7/24/03, 10:57 AM Black EN
Inhaltszusammenfassung zur Seite Nr. 9
Insert the batteries in the remote unit before you GETTING STARTED NOTE set up the main unit. Do not use rechargeable batteries. BATTERIES AC POWER ADAPTER Batteries for the remote and main units are supplied An AC power adapter is supplied for use with the main with this product. Replace them whenever the low unit. You must connect the power adapter if you wish to battery signal ( ) displays. Remove the battery use the continuous backlight feature. The jack is located compartment lid on the bo
Inhaltszusammenfassung zur Seite Nr. 10
CHANGE SETTINGS INSTALLATION Press and hold SELECT for 2 seconds. Then, press Mount the remote unit on a flat surface using the recess UP or DOWN to change each setting. Press SELECT holes on the back of the unit. to switch options. For best results: • Before you insert the batteries, select the REMOTE UNIT SET UP measurement unit and channel number first. Up to 3 remote units can be used with this product to • Place the unit out of direct sunlight and moisture. monitor outdoor temperature and h
Inhaltszusammenfassung zur Seite Nr. 11
CLOCK NOTE For best results, place the unit away from metal or electrical objects, and near a window with a This product can automatically synchronize the date and clear view to the sky. time with official time-keeping organizations in Frankfurt, Germany (PS-M01) or Rugby, England (PS-M01U). TO DISABLE OR ENABLE AUTO- When the unit is within 1500 km (932 miles) of a RF SYNCHRONIZATION signal, the reception icon will blink during reception. In Clock mode, press DOWN for 2 seconds to disable the a
Inhaltszusammenfassung zur Seite Nr. 12
SET ALARM SET OR CHANGE THE CLOCK 1. Press SELECT several times until the Alarm 1. Press SELECT to switch to the Clock Mode. area flashes. The time will flash. 2. Press and hold SELECT for 2 seconds to enter 2. Press and hold SELECT for 2 seconds to enter the setting mode. the setting mode. 3. Select the hour, minute, melody (1 - 7) and 3. Select the 12/24-hour format, hour, and minute. volume level (Lo or Hi). Press UP or DOWN to Press UP or DOWN to change the setting. change the setting. Press
Inhaltszusammenfassung zur Seite Nr. 13
3. Select the year, month, date, and language. TO TURN THE ALARM OFF OR ON Press UP or DOWN to change the setting. Press any button to stop the alarm. Press SELECT to confirm. To turn the alarm off completely (deactivate it for the NOTE The language options are (E) English, next day), press ALARM. (F) French, (D) German, (I) Italian, and (S) Spanish. CALENDAR MOON PHASE SET DATE Press SELECT until the Calendar Area flashes. Then, Clock auto-synchronization must be deactivated before press UP or
Inhaltszusammenfassung zur Seite Nr. 14
BAROMETER Trend Description Pressure change (mb/hPa) This product tracks barometric pressure changes over the past 24 hours to provide the weather forecast 1 hr 6 hrs ( 14) and a trend line showing the direction of barometric change. Barometric changes are measured + + Rising 1 3 by the main (indoor) unit. BAROMETRIC TREND Steady Steady Steady The barometric trend arrow for the last 30 minutes is always displayed. Falling -1 -3 VIEW THE LAST 24 HOURS Press SELECT 2 times until the Barometer Ar
Inhaltszusammenfassung zur Seite Nr. 15
SET UNIT AND ALTITUDE WEATHER FORECAST You can set the unit of measurement (mb/hPa or inHg) This product forecasts the next 12 to 24 hours of and altitude. Setting the altitude allows the product to weather within a 30 to 50 km (19 - 31 mile) radius with take more accurate barometric measurements. 70 to 75 percent accuracy. The weather forecast is always displayed. 1. Press SELECT 2 times until the Barometer Area flashes. Clear Partly Cloudy Cloudy Rainy 2. Press and hold SELECT for 2 seconds. 3
Inhaltszusammenfassung zur Seite Nr. 16
Outdoor measurements are collected by the remote SELECT REMOTE UNIT CHANNEL unit. While in the Temperature / Humidity Mode, press CHANNEL to switch between CH 1, 2, or 3, or press Temperature is give at the top; humidity is below. and hold CHANNEL for 2 seconds to enter Auto scan mode. If only 1 remote unit is in use, you will not be able VIEW MIN / MAX / CURRENT MEASUREMENTS to change channels or select Auto. If you select “Auto”, Press SELECT 3 times until the Temperature and the channel will
Inhaltszusammenfassung zur Seite Nr. 17
COMFORT ZONE Searching No sensor Sensor found The indoor and outdoor comfort zones are shown for the following conditions. Zone Temperature RelativeHumidity NOTE Signals from household electrical appliances Any >70% such as doorbells and home security systems can Wet cause temporary reception failures between the indoor and outdoor units. This is normal and does not affect the general performance of the product. Reception will Any <40% automatically resume once the interference ends. Dry 20 -
Inhaltszusammenfassung zur Seite Nr. 18
TRENDS SET UNIT The trend arrow for the last 30 minutes always displays. While in Temperature / Humidity Mode, press SELECT Indoor and outdoor temperature and humidity trends are for 2 seconds. Press UP or DOWN to switch between shown separately. °C and °F. Press SELECT to confirm. BACKLIGHT Trend Temperature Relative Humidity Press SNOOZE/LIGHT to illuminate the backlight for + + 0.5 °C 3% 5 seconds. CONTINUOUS BACKLIGHT Steady Steady The AC power adapter must be plugged in to use this featu
Inhaltszusammenfassung zur Seite Nr. 19
E 2. Move it to the “AUTO” position to enable RESET SYSTEM continuous backlight controlled by light intensity. The RESET buttons are located in the battery compartments for the main and remote units. Press When activated, the backlight will be on these buttons with the tip of a blunt object (such as a whenever the unit perceives that the room is ball point pen) whenever you change the batteries, or dark. whenever performance is not behaving as expected 3. The Light sensitivity knob is located in
Inhaltszusammenfassung zur Seite Nr. 20
WARNINGS • Do not make any changes or modifications to this product. Unauthorized changes may void This product is designed to give you years of service if your right to use the product. handled properly. Observe the following guidelines: • The contents of this user manual are subject to change without notice. • Never immerse the unit in water. This can • Images not drawn to scale. cause electrical shock and damage the unit. • Do not subject the main unit to extreme force, shock, or fluctuations
