Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing this Sony Compact comply with the limits for a Class B digital Disc Player. This unit lets you enjoy a variety device, pursuant to Part 15 of the FCC Rules. of features as well as either a supplied rotary These limits are designed to provide commander or a supplied wireless remote. reasonable protection against harmful interference in a residential installation. This In addition to the CD playback and radio eq
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents This Unit Only With Optional Equipment Location of controls ................................................. 4 CD/MD Unit Playing a CD or MD ......................................... 19 Getting Started Playing tracks repeatedly — Repeat Play .............................................. 20 Resetting the unit ................................................ 6 Playing tracks in random order Detaching the front panel .................................. 6 — Shuffle Play ..........
Inhaltszusammenfassung zur Seite Nr. 4
S M A / Location of controls OPEN SOUND MODE DSPL LIST SOURCE SHIFT 12 3 4 5 6 7 8 9 10 OFF CDX-C7850 Refer to the listed pages for details. 1 SEEK/AMS (seek/Automatic Music !Á OFF button 6, 8 Sensor/manual search) control !ª Reset button (located on the front side 9, 10, 11, 13, 20, 22, 25, 26, 27 of the unit behind the front panel) 6 2 MODE (band/unit select) button !£ Receptor for the wireless remote 12, 13, 19, 21, 24, 26 !¢ SHIFT button 3 6 (eject) button (located on the front PLAY MODE s
Inhaltszusammenfassung zur Seite Nr. 5
The corresponding buttons of the Wireless remote wireless remote control the same (RM-X47) functions as those on the unit. 1 OFF button 2 SEEK/AMS button 3 (Ð) (+) buttons OFF MODE SOURCE DIR 4 ATT button SEEK AMS 5 SOUND/SEL button – PRESET + 6 DSPL button REW DISC FF – 7 PRESET/DISC button SOUND You cannot perform manual search and SEL manual tuning with the remote. ATT DSPL 8 SOURCE button 9 MODE/DIR button When the POWER SELECT switch is set to the B position, the unit cannot be operated wit
Inhaltszusammenfassung zur Seite Nr. 6
Attaching the front panel Place the hole a of the front panel onto the spindle b on the unit as illustrated, then push Getting Started the left side in. a Resetting the unit b Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ball- point pen. Reset button Notes µ • Pressing the reset button will erase the clock setting and some memorized functions. • When you
Inhaltszusammenfassung zur Seite Nr. 7
3 Press (SHIFT). After the clock setting is complete, the Setting the clock display returns to normal playback mode. The clock uses a 12-hour digital indication. Note If the POWER SELECT switch on the bottom of the Example: To set the clock to 10:08 unit is set to the B position, turn the power on 1 Press (SHIFT), then press (3) (SET UP) first, then set the clock. repeatedly until “Clock” appears. SET UP 1 Press (5) (n). SET UP The hour indication flashes. 2 Set the hour. to go backward to go fo
Inhaltszusammenfassung zur Seite Nr. 8
Changing the display item Each time you press (DSPL), the item changes as follows: CD Player $ Elapsed playback time $ 1 2 Disc name* /Artist name* Listening to a CD $ 1 Track name* 1 Press (OPEN) and insert the CD. $ Playback starts automatically. Clock Labelled side up 1 * If you inserted a non-CD TEXT disc, 6 “NO D.Name” or “NO T.Name” appears in the display. 2 * If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist nam
Inhaltszusammenfassung zur Seite Nr. 9
Note Automatically scrolling a disc name If “ ” or “ ” appears in the — Auto Scroll display, that means you have reached the If the disc name, artist name, or track name on beginning or the end of the disc and you cannot go any further. a CD TEXT disc exceeds 10 characters and the Auto Scroll function is on, the following information will be automatically scrolled. • The disc name appears when the disc has changed (if the disc name is selected). • The track name appears when the track has Playin
Inhaltszusammenfassung zur Seite Nr. 10
Playing the stored program Creating a program 1 Press (SHIFT). — CD Program Memory 2 Press (4) (PLAY MODE) repeatedly until You can play the tracks in the order you want “PGM” appears. by making your own program. You can select up to 24 tracks for a program. You can store the programs in memory. 3 Press (5) (n) repeatedly until “PGM on” appears. 1 During CD playback, press (SHIFT), then PGM press (4) (PLAY MODE) for two seconds. RLAY MODE TRACK Program Play starts. RLAY MODE ENTER 4 Press (SHIFT
Inhaltszusammenfassung zur Seite Nr. 11
Erasing tracks in a program Adding tracks to a program 1 Press (SHIFT), then press (4) (PLAY 1 Press (SHIFT), then press (4) (PLAY MODE) for two seconds. MODE) for two seconds. TRACK TRACK RLAY MODE ENTER RLAY MODE ENTER To select Program 2, press (5) (n) 2 Press (2) (N) or (5) (n) to select the repeatedly until “P” appears. track you want to erase. Track slot number 2 Press (2) (N) or (5) (n) to select the track slot number where you want to insert a track. TRACK Track slot number RLAY MODE ENT
Inhaltszusammenfassung zur Seite Nr. 12
Memorizing only the Radio desired stations You can preset up to 30 stations (10 each for FM1, FM2, and AM) in the order of your choice. Memorizing stations automatically 1 Press (SOURCE) repeatedly to select the tuner. — Best Tuning Memory (BTM) The unit selects the stations with the strongest 2 Press (MODE) repeatedly to select the signals and memorizes them in the order of band. their frequencies. You can store up to 10 stations on each band (FM1, FM2, and AM). 3 Push the SEEK/AMS control up
Inhaltszusammenfassung zur Seite Nr. 13
If interference occurs during FM Receiving the memorized reception If there is interference from neighboring stations stations, follow the steps below and select “Narrow”. If interference is not a problem, 1 Press (SOURCE) repeatedly to select the select “Wide” to maximize signal reception tuner. and improve sound quality or “IF Auto ”to switch between “Narrow” and “Wide” automatically. 2 Press (MODE) repeatedly to select the band. 1 Press (SHIFT) during FM reception. 3 Press the number button (
Inhaltszusammenfassung zur Seite Nr. 14
Displaying the station name Storing the station names Press (DSPL) during radio reception. — Station Memo You can assign a name to each radio station and store it in memory. The name of the current station appears in the display. You can store up to eight characters for each station. Each time you press (DSPL), the item changes as follows: Storing the station names z Station name* z Frequency 1 Tune in a station whose name you want Clock Z to store. * If the station name is not stored, “NO Na
Inhaltszusammenfassung zur Seite Nr. 15
LIST MODE SOUND Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) Other Functions on the rotary commander. By rotating the control You can also control an optional CD or MD (the SEEK/AMS control) unit, or equalizer preamplifier with the rotary commander. Labelling the rotary commander Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below. Rotate the control and release it to: •Locate a
Inhaltszusammenfassung zur Seite Nr. 16
Other operations Rotate the VOL control to Adjusting the sound adjust the volume. Press (ATT) to characteristics attenuate the sound. You can adjust the equalizer curve, listening position, cut-off frequency, bass, treble, balance and fader. You can store the bass and treble levels independently for each source. Press (OFF) to turn off the unit. 1 Select the item you want to adjust by Press (SOUND) to adjust the pressing (SOUND) repeatedly. volume and sound menu. VOL (volume) n EQ* (equalizer cu
Inhaltszusammenfassung zur Seite Nr. 17
1 Press (SHIFT). Changing the sound and 2 Press (3) (SET UP) repeatedly until the display settings desired item appears. The following items can be set: Each time you press (3) (SET UP), the item •Clock (page 7). 1 changes as follows: •D.Info (Dual Information)* – to display the 1 clock and the play mode simultaneously (on) Clock n D.Info* n Amber/Green n Dimmer 1 n Contrast n Voice* n Beep n RM n or to display the information alternately (off). 2 1 1 L.out* n Loud* n LPF* n M.dspl n •Amber/Gree
Inhaltszusammenfassung zur Seite Nr. 18
Adjusting the frequency of Adjusting the sound and the subwoofer(s) frequency of the equalizer To match the characteristics of the connected This unit can also control an optional equalizer subwoofer(s), you can cut out the unwanted preamplifier. high and middle frequency signals entering This lets you add some effects to the sound the subwoofer(s). By setting the cut-off field of the currently selected source. frequency, the subwoofer(s) will output only low frequency signals so you can get a
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
Locating a specific track — Automatic Music Sensor (AMS) Playing tracks in random During playback, push the SEEK/AMS order — Shuffle Play control up or down and release for each track you want to skip. You can select: •Shuf 1 – to play the tracks on the current disc To locate succeeding in random order. tracks •Shuf 2 – to play the tracks in the current unit To locate preceding in random order. tracks •Shuf All – to play all the tracks in all the units in random order. Locating a specific point
