Inhaltszusammenfassung zur Seite Nr. 1
3-862-493-11(1)
Mini Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. Serial No.
f
MHC-FR10 / F150 / F250AV
©1998 by Sony Corporation 1
Inhaltszusammenfassung zur Seite Nr. 2
Note to CATV system installer WARNING This reminder is provided to call CATV system installer’s attention to Article 820-40 of the NEC that To prevent fire or shock hazard, do not provides guidelines for proper grounding and, in expose the unit to rain or moisture. particular, specifies that the cable ground shall be connected to the grounding system of the building, To avoid electrical shock, do not open the cabinet. as close to the point of cable entry as practical. Refer servicing to qualif
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Getting Started DJ Effects Step 1: Hooking up the main unit ....... 4 Looping part of a CD ........................... 40 Step 2: Setting up the surround Flashing part of a CD ........................... 40 1 speakers* .......................................... 7 Step 3: Setting the time ......................... 9 Sound Adjustment Step 4: Presetting radio stations ........ 10 Adjusting the sound ............................ 41 Inserting CDs ................................
Inhaltszusammenfassung zur Seite Nr. 4
+ + — R L Getting Started Step 1: Hooking up the main unit Rear surround Rear surround AM loop antenna speaker (Right)* speaker (Left)* FM antenna 2 2 Center surround speaker** 3 7 4 5 1 1 1 6 2 3 Front speaker (Left) Front speaker (Right) * MHC-F150/F250AV only ** MHC-F250AV only Note 1 Connect the front speakers. The type of speakers supplied vary Connect the speaker cords to the according to the model you purchased (see “Specifications” on page 56). SPEAKER jacks of the same color. Keep the
Inhaltszusammenfassung zur Seite Nr. 5
+ + — + FM75 AM COAXIAL FM75 AM R L 2 Connect the rear surround speakers. 4 Connect the FM/AM antennas. Connect the speaker cords from the rear Set up the AM loop antenna, then surround speakers to the appropriate connect it. REAR SPEAKER jacks. Connect the solid Jack type A cords to the red jacks and connect the Extend the FM lead striped cords to the black jacks. antenna horizontally. AM loop antenna Keep the speaker cords away from the antennas to prevent noise. Insert only the stripped porti
Inhaltszusammenfassung zur Seite Nr. 6
] } Step 1: Hooking up the main unit To attach the speaker pads (continued) Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. 5 Set VOLTAGE SELECTOR to position of your local power line Front speaker voltage (for models with a voltage selector). VOLTAGE SELECTOR 110-120V 220-240V Center surround speaker (MHC-F250AV 6 Connect the power cord to a wall only) outlet. Demo mode appears in the display. 7 Deactivate the demo mode by
Inhaltszusammenfassung zur Seite Nr. 7
Note If you do not use the remote for a long period of Step 2: Setting up the time, remove the batteries to avoid possible damage from battery leakage. surround speakers Note on placement Be sure to place this system on a horizontal place. If the system is slanted, it may cause malfunction or For MHC-F250AV damage to the system. Connecting the supplied rear and center surround speakers enables you to fully enjoy Dolby Pro Logic Surround sound. Dolby Pro Logic Surround is a decoding system standa
Inhaltszusammenfassung zur Seite Nr. 8
Step 2: Setting up the surround Adjusting the speaker speakers (continued) volume 2 (For MHC-F250AV only) (For MHC-F250AV only) Place the center surround speaker so it is placed about the same height as To enjoy Dolby Pro Logic Surround sound, the front speakers (A). Align the turn the Dolby Pro Logic mode on, then center surround speaker with the adjust the volume of each speaker using the test tone that the system provides. front speakers or place it slightly back from the position of the fron
Inhaltszusammenfassung zur Seite Nr. 9
1 Press PRO LOGIC (or PRO LOGIC Step 3: Setting the ON/OFF on the remote). “PRO LOGIC ON” appears. time 2 Press T.TONE ON/OFF on the You must set the time before using the timer remote. functions. The test tone is heard from the speakers The clock is on a 24-hour system for the in the following order. Adjust the European model, and a 12-hour system for volume of the test tone. other models. Front (left) b Center b Front (right) The 12-hour system model is used for V illustration purposes. Rear
Inhaltszusammenfassung zur Seite Nr. 10
Step 3: Setting the time (continued) Step 4: Presetting radio stations 3 Press ENTER The minute indication flashes. You can preset the following number of ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR stations: NEXT REPEAT 1 PRESET VOLUME DELETE PLUS ONE CD TEXT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO FILE HI-LIGHT DOLBY NR RELAY kHz GROUP 1 2 REC SLEEP MHz 1 2 3 4 5 FILE –2 band model: 20 for FM, 10 for AM. –3 band model: 20 for FM, 10 for MW, and 10 for SW (or LW, depen
Inhaltszusammenfassung zur Seite Nr. 11
1 Press TUNER/BAND repeatedly 3 Press TUNER MEMORY. until the band you want appears in A preset number appears in the display. the display. Preset number The bands you can receive vary ALL 1 DISC S TUNED DBFB PROGRAM MANUAL depending on the model you purchased. SHUFFLE AUTO SUR REPEAT 1 NEXT PRESET PLUS ONE VOLUME DELETE CD TEXT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO FILE Be sure to check which bands you can HI-LIGHT DOLBY NR RELAY kHz GROUP 1 2 REC SLEEP MHz FILE 1 2 3 4 5 receive.
Inhaltszusammenfassung zur Seite Nr. 12
3 Open the front cover by pushing the Inserting CDs right edge of the cover. You can insert up to 51 discs into this player. We recommend you use the PLUS ONE slot for CDs you will be inserting and removing frequently (see page 29). 1 4 3,7 2 Front cover 4 Turn the jog dial until you find the disc slot where you want to insert a disc, while checking the disc number (written beside every slot and also indicated in the display). Playing position Rotary table Disc slot at the Disc number loading po
Inhaltszusammenfassung zur Seite Nr. 13
Removing CDs 5 Insert a disc with the label side facing right. After following Steps 1 to 3 of “Inserting CDs” on page 12, remove the discs. Then Notes close the front cover. • Make sure you have inserted the disc into each slot at a right angle to the rotary table. If the disc Notes is not put in straight, it may damage the player • Do not insert an empty 8 cm (3-inch) CD adaptor. or the disc. It may damage the player. • Make sure the rotary table comes to a • Do not attach anything such as sea
Inhaltszusammenfassung zur Seite Nr. 14
Connecting an MD deck for analog recording Connecting optional Make sure to match the color of the plugs and AV components the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. To enhance your system, you can connect To the audio output To the audio input optional components. Refer to the of the MD deck of the MD deck instructions of each component. Connecting audio components Select one of the following two connections, depending on the
Inhaltszusammenfassung zur Seite Nr. 15
Connecting a super woofer Connecting a VCR speaker Make sure to match the color of the plugs and You can connect an optional super woofer the connectors. To listen to the sound of the speaker. connected VCR, press while holding To super woofer down FUNCTION when the power is turned off. This switches the “MD” function to “VIDEO”. Once you enable the “VIDEO” function, just press FUNCTION repeatedly until “VIDEO” appears. To the audio output of the VCR Note If the sound is distorted when selecti
Inhaltszusammenfassung zur Seite Nr. 16
FM75 y AM FM75 y AM COAXIAL FM75 AM y COAXIAL FM75 AM y AM antenna Connecting outdoor Connect a 6- to 15- meter (20- to 50- feet) antennas insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna Connect the outdoor antenna to improve the connected. reception. Jack type A FM antenna Screw clamp Connect the optional FM outdoor antenna. You can also use the TV antenna instead. Insulated wire (not supplied) Jack type A Screw clamp 75-ohm coaxial cable (not supplied) Ground wire
Inhaltszusammenfassung zur Seite Nr. 17
Basic Operations Basic Operations To You need to Playing a CD Stop play Press p. Pause Press CD (P (P on the — Normal play remote). You can play up to 51 CDs in a row. Resume playing Press CD (P (P on the after pause remote). CONTINUE Select a CD Turn the jog dial clockwise CD =/0 (or press b on the remote) (Power) p (P )/+ 1 or counterclockwise (or press B on the remote) and release it when you reach the desired CD. Advance or return Press V on the remote (to 10 CDs at a time move 10 CDs ahead)
Inhaltszusammenfassung zur Seite Nr. 18
Playing a CD (continued) Recording a CD To specify the next CD to play — CD Synchro Recording While playing a disc, turn the jog dial until the desired disc number (or Disc Memo) and The CD SYNCHRO button lets you record “NEXT” appear. To skip to the next disc from a CD to a tape easily. You can use TYPE right away, press ENTER. I (normal) or TYPE II (CrO2) tapes. The ALL 1 DISC S TUNED DBFB recording level is adjusted automatically. PROGRAM MANUAL SHUFFLE AUTO SUR REPEAT 1 NEXT PRESET PLU
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operations 2 Turn the jog dial until the disc Listening to the radio number or Disc Memo (see page 33) –– Preset Tuning appears. ALL 1 DISC S TUNED DBFB PROGRAM MANUAL SHUFFLE AUTO SUR REPEAT 1 NEXT PRESET PLUS ONE VOLUME DELETE CD TEXT TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO FILE HI-LIGHT DOLBY NR RELAY kHz GROUP 1 2 REC SLEEP 1 2 3 4 5 Preset radio stations in the tuner's memory MHz FILE first (see “Step 4: Presetting radio stations”). Disc number or Disc Memo (Power) 12 3 Pre
Inhaltszusammenfassung zur Seite Nr. 20
Listening to the radio (continued) To Do this Turn off the radio Press . Adjust the volume Turn VOLUME (or press VOLUME (VOL) +/– 1 Press TUNER/BAND repeatedly on the remote). until the band you want appears in the display. To listen to non-preset radio The bands you can receive vary depending on the model you purchased. stations (from front panel only) Be sure to check which bands you can Use manual or automatic tuning in step 2. receive. For manual tuning, press + ()/+) or – Every time you pre
