Inhaltszusammenfassung zur Seite Nr. 1
PROFESSIONAL DISC RECORDER
PDW-R1
OPERATION MANUAL [English]
1st Edition (Revised 1)
Inhaltszusammenfassung zur Seite Nr. 2
Do not install the appliance in a confined space, such as a Important Safety Instructions book case or built-in cabinet. • Read these instructions. This apparatus is provided with a main switch on the rear � Keep these instructions. panel. Install this apparatus so that user can access the main � Heed all warnings. switch easily. � Follow all instructions. � Do not use this apparatus near water. � Clean only with dry cloth. � Do not block any ventilation openings. Install in accordance with t
Inhaltszusammenfassung zur Seite Nr. 3
If you have questions on the use of the above Power Cord/ Denna etikett finns på ovansidan av driftenheten. Appliance Connector/Plug, please consult a qualified service personnel. Denne mærkat sidder på drevenhedens øverste panel. When installing the installation space must be secured in Tämä kyltti sijaitsee ajurilaitteen yläpinnalla. consideration of the ventilation and service operation. � Do not block the ventilation slots at the left side and right Dette merket er plassert på oversiden av
Inhaltszusammenfassung zur Seite Nr. 4
For the customers in the USA and Canada RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking lithium-ion batteries. For the customers in Europe This product with the
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Before Using the Unit .............................. 7 Function)..........................................40 Setting the Line Mode ................................7 Chapter 4 Recording/Playback Chapter 1 Overview 4-1 Recording .......................................... 42 1-1 Features ............................................... 9 4-1-1 Preparations for Recording..............42 4-1-2 Recording Time Code and User Bit Values ..............................................
Inhaltszusammenfassung zur Seite Nr. 6
6-1-3 Assigning User-Defined Clip Titles 75 Index....................................................... 151 6-1-4 Assigning User-Defined Clip and Clip List Names .......................................76 6-2 File Access Mode File Operations... 78 6-2-1 Making FAM Connections ..............78 6-2-2 Operating on Files ...........................79 6-2-3 Exiting File Operations....................79 6-3 FTP File Operations .......................... 80 6-3-1 Making FTP Connections................
Inhaltszusammenfassung zur Seite Nr. 7
Before Using the Unit Setting Line mode Setting the Line Mode 525U 525(U): NTSC (areas outside Japan) This unit is shipped with the line mode still unset. 525J 525(J): NTSC (Japan) Therefore you need to set the line mode before using the 625 625: PAL unit. (The unit cannot be used unless the line mode is set.) Once it is set, the line mode is retained even when the unit 3 When the desired setting appears, release the is powered off. SHUTTLE button. “Push SET !!” appears. Setting procedure Us
Inhaltszusammenfassung zur Seite Nr. 8
a) Item Item name Settings No. 525 (U)/525 (J) 625 Basic menu 002 CHARACTER 00 to 0A to 2A 00 to 09 to 29 H-POSITION 003 CHARACTER 00 to 2E to 38 00 to 37 to 43 V-POSITION Extended menu 601 VITC 12H to 16H to 9H to 19H to 22H POSITION 20H SEL-1 602 VITC 12H to 18H to 9H to 21H to 22H POSITION 20H SEL-2 628 DF MODE Item No item 652 UMID SDI 12 H to 17 H to 9 H to 17 H to VANC LINE 19 H 18 H 660 ESSENCE 12 H to 17 H to 9 H to 17 H to MARK SDI 19 H 18 H VANC LINE 703 BLANK LINE Setting range: Se
Inhaltszusammenfassung zur Seite Nr. 9
Overview 1 Chapter Thumbnail search operation Simply press the THUMBNAIL button and the PDW-R1 1-1Features instantly displays thumbnails on the video panel or a connected monitor. You can easily cue up the desired The PDW-R1 is a convenient, compact, and lightweight scene by guiding the cursor to the corresponding optical disc recorder. It allows you to record to optical thumbnail and confirming your selection with the SET discs, play back optical discs, and record audio and video button. 1
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Overview 1) A clip is created every time recording is stopped. � The output from external DV devices (VTRs, nonlinear �Video and audio data are always recorded in empty sections of the disc. editors, etc.) can be input to this unit and recorded on Recording begins instantly, even after playback, without overwriting Professional Discs. existing video on the disc. �Recording is done in clip units, which makes it simple to delete a clip immediately after shooting if it is judged to
Inhaltszusammenfassung zur Seite Nr. 11
Names and Functions of Parts 2 Chapter 2-1 Configuration Operation of the PDW-R1 uses the parts shown in the following figure. Security slot AC power switch (rear panel) You can fit a commercially available Press " to power on; press a to a) security cable into this slot. power off. Battery pack shoe (covered) (see page 33) a) For information about how to use your security cable, refer to the instructions Press here to raise the cover. provided with the security cable. Shoulder belt posts (
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 2 Names and Functions of Parts 2-2 Control Panel 1 ACCESS indicator 2 On/standby switch and indicator 3 Remote control switch and NETWORK access indicator 4 KEY INHI switch 1 Time data settings section (see page 13) 2 Operating mode selection/menu setting section (see page 13) 3 Jog/shuttle control block (see page 14) SHUTTLE JOG SUB THUMB KEY INHI COUNTER TC SHIFT CLIP NAIL ON INT PRESET F-RUN SEL HOLD NETWORK LOCAL EXT ACCESS REMOTE RP188 REGEN R-RUN OFF CLIP ESSENCE MENU MARK ALL/CH
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2 Names and Functions of Parts Make the UB or VIUB selection in extended menu 1 Time data settings section item 629 “TC SELECT.” COUNTER: The elapsed recording/playback time (hours, 1 INT/EXT/RP188 switch minutes, seconds, frames). This can be reset by 2 PRESET/REGEN switch pressing the RESET button (see page 14). The corresponding indicator above the time data display 3 F-RUN/R-RUNswitch lights according to the setting. TC COUNTER SEL HOLD You can also synchronize timecode with th
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 2 Names and Functions of Parts each clip or sub-clip appear. Press once more to turn the 3 Jog/shuttle control block button off, and return to a whole-screen display. To display the thumbnails of essence mark frames (frames 1 SHUTTLE button with an essence mark attached), hold down the SHIFT 2 Jog/shuttle transport button, and press this button. The essence mark selection indicators menu appears. Select the desired type of essence mark, and 3 JOG button the corresponding essence m
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Names and Functions of Parts speed varies in the range ±1 times normal speed, according b ALL/CH-1, CH-2 to CH-4 (audio level) adjustment to the rotation rate of the jog dial. There are no detents. knobs Normally, you press the JOG button before turning the jog Depending on the setting of the VARIABLE switch, these dial, but it is also possible to make a setting to enable jog adjust the input audio or playback audio levels of channels mode directly by turning the dial (set extende
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2 Names and Functions of Parts e REC (record) button 5 Recording and playback control section To start recording, hold down this button, and press the PLAY button. The recording takes place on an unrecorded 1 PREV button part of the disc. 2 PLAY button To stop recording, press the STOP button. 3 NEXT button This creates a clip of the recorded portion. PREV PLAY NEXT STOP REC 6 Arrow buttons TOP F REV F FWD END The four arrow buttons are also used as the MARK1 4 STOP button button,
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 Names and Functions of Parts 2-3 LCD Panel 1 Indicators on the back of the LCD panel 1 Status display (see page 18) 2 Video panel (color) DATA DATA DATA DATA dB OVER dB OVER dB OVER dB OVER VITC VIUB COUNTER HOLD VITC 0 0 0 0 PB NDF EXT-LK -12 -12 -12 -12 -20 -20 -20 -20 -30 -30 -30 -30 HOURS MINUTES SECONDS FRAMES -40 -40 -40 -40 -60 -60 -60 -60 DISC E B CH- 15 CH- 26 CH- 37 CH- 48 BATT E F PROCESS AUDIO CONTROL VIDEO INPUT CH INPUT SEL INPUT SEL STATUS CHARACTER LIGHT MONITOR WAR
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 2 Names and Functions of Parts e REC INHI (recording inhibit) indicator HOLD indicator: This lights when the internal time code This lights in the following cases. generator (TCG) is stopped. Does not light when the � When a disc with recording inhibited is loaded. output of the time code reader (TCR) is being � When extended menu item 310 “REC INHIBIT” is set to displayed during playback and stop. “on.” TC/VITC (time code type) indicator: This lights when � The format of the recor
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Names and Functions of Parts “BATT” and “E” flashing: Exhausted (charging Signals are selected in the following order. The video input required). Operation of the PDW-R1 stops. indication in the video panel changes to reflect this. SDI t COMPOSITE t SG t i.LINK e Disc loaded mark This lights while a disc is loaded in the PDW-R1. It flashes Note as the disc is inserted, and while it is being ejected. Input signals (AV/C) from the S400 (i.LINK) connector cannot be recorded when the
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2 Names and Functions of Parts Item Description Item Description PROC This appears when at least 1 video AES/EBU 1/2 Audio channels (setting values: tr1/2, processing parameter has been set to tr3/4, tr5/6, tr7/8) assigned to the “VAR (VARIABLE).” DIGITAL AUDIO (AES/EBU) OUT 1/2 connectors with sub item 1 of extended a) The line mode of the current clip on the DISC menu item 827 disc (setting values: 525, 625), the video recording format (setting values: (AES/EBU) 3/4 Audio chan
