Inhaltszusammenfassung zur Seite Nr. 13
CD/MD Changer/Additional Information Do not expose the discs to direct sunlight or Additional heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where Information there can be a considerable rise in the temperature inside the car. Precautions • If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. Before playing, clean the discs with an optional • If no power is b
Inhaltszusammenfassung zur Seite Nr. 14
LIST SOUND DSPL Cleaning the connectors The unit may not function properly if the Attaching the label to the connectors between the unit and the front rotary remote panel are not clean. To prevent this, open the front panel by pressing (RELEASE), then You can control this unit with the optional detach it and clean the connectors with a rotary remote (RM-X2S). cotton swab dipped in alcohol. Do not apply Several labels are supplied with the rotary too much force. Otherwise, the connectors may remo
Inhaltszusammenfassung zur Seite Nr. 15
Additional Information Location of controls OFF SEEK/AMS DSPL LIST SOURCE SOUND 123456789 10 SHIFT RELEASE MUTE Refer to the pages for details. EN !Á Reset button (located on the front side 1 SEEK/AMS (seek/Automatic Music of the unit hidden by the front panel) 4 Sensor/manual search) button 5, 6, 7, 10, 12 !ª MUTE button 8 2 OFF button 4, 5 !£ SHIFT button 3 SOUND button 8 BTM 6 4 (+) (Ð) (volume/sub output level/bass/ PLAY MODE 6, 7, 10, 12 treble/balance/fader control) buttons 5, SET
Inhaltszusammenfassung zur Seite Nr. 16
Location of controls Optional wireless remote (RM-X41) OFF DIR SOURCE MODE – SEEK + = AMS + – PRESET + REW DISC FF – SOUND SEL MUTE DSPL EN The buttons of the wireless remote work the same functions as those on this unit. 1 OFF button 6 MUTE button 2 DIR button 7 (Ð) (+) buttons (DIR) does not work with this unit. 8 DSPL button 3 SOURCE button 9 SOUND button 4 SEEK/AMS button 5 PRESET/DISC button You cannot do the manual search and manual tuning with the remote. When the POWER SELECT switch is s
Inhaltszusammenfassung zur Seite Nr. 17
Additional Information Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 15 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1 % total harmonic distortion. Other specifications CD player section General System Compact disc digital audio Output lead Power antenna relay system control lead Signal-to-noise ratio 90 dB Power amplifier control Frequency response 10 – 20,000 Hz lead Wow and flutt
Inhaltszusammenfassung zur Seite Nr. 18
Troubleshooting guide The following check will help you remedy the problems that you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Problem Cause/Solution No sound. •Adjust the volume with (+). •Set the fader control to the center position for two-speaker systems. The contents of the memory • The power cord or battery has been disconnected. have been erased. • The reset button has been pressed. n Store again into the
Inhaltszusammenfassung zur Seite Nr. 19
Additional Information Error displays (when the optional CD/MD changer is connected) The following indications will flash for about five seconds, and an alarm sound will be heard. Display Cause Solution The disc magazine is not inserted in Insert the disc magazine with discs NO MAG the CD/MD changer. into the CD/MD changer. No disc is inserted in the CD/MD Insert the discs in the CD/MD NO DISC changer. changer. A CD is dirty or inserted upside Clean or insert the CD correctly. 2 down.* 1 * ERROR
Inhaltszusammenfassung zur Seite Nr. 20
Index A M, N, O Automatic Music Sensor (AMS) 5, 10 Manual search 6, 10 Automatic tuning 7 Manual tuning 7 Auto Scroll 9 MD playback 9 Memorizing a station 6 Monaural mode 7 B Mute 8 Balance 8 Bass 8 P, Q Bank Play 12 Beep tone 9 PLAY MODE Best Tuning Memory (BTM) 6 BANK 12 INTRO 6, 10 LOCAL 7 C MONO 7 REP 6, 10 Caution alarm 4 SHUF 6, 10 CD playback 5, 9 Clock 5 R D, E Radio 6 EN Direct disc selection 10 Repeat Play 6, 9 Reset 4 Disc Memo 11 Disc Scan 10 Rotary remote 9, 14 Display 5, 8, 9 Dual
Inhaltszusammenfassung zur Seite Nr. 1
3-856-126-11 (1)
FM/AM
Compact Disc
Player
EN
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. CDX-C410 Serial No.
For installation and connections, see the supplied installation/connections
manual.
CDX-C410
1996 by Sony Corporation
Actual total number: Sony CDX-C410 (E) 3-856-126-11(1)
Inhaltszusammenfassung zur Seite Nr. 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing the Sony Compact comply with the limits for a Class B digital Disc Player. This unit lets you enjoy a variety device, pursuant to Part 15 of the FCC Rules. of features by using either a rotary remote or a These limits are designed to provide wireless remote. reasonable protection against harmful interference in a residential installation. This In addition to the CD playback and the radio equipment generates, u
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents This Unit Only With Optional Equipment Getting Started CD/MD Changer Resetting the unit ................................................ 4 Playing a CD or MD ........................................... 9 Detaching the front panel .................................. 4 Scanning the tracks Setting the clock .................................................. 5 — Intro Scan ................................................. 10 Playing tracks repeatedly — Repeat Play ..................
Inhaltszusammenfassung zur Seite Nr. 4
Attaching the front panel Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset A the unit. Press the reset button with a pointed object, B such as a ball-point pen. Notes • Be sure not to attach the front panel upside down. • Do not press the front panel hard against the unit when attaching it. Press it lightly against the u
Inhaltszusammenfassung zur Seite Nr. 5
Getting Started/CD Player Setting the clock CD Player The clock has a 12-hour digital indication. Example: Set the clock to 10:08 1 Press (SHIFT), then press (2) (SET UP). Listening to a CD SET SUR EQ CLOCK Simply insert the CD. SET UP Playback starts automatically. Labeled side up 1 Press (4) (n). SET SUR EQ 100 SET UP The hour digit flashes. 2 Set the hour. to go forward If a CD is already inserted, press (SOURCE) repeatedly until “CD” appears. to go back EN Elapsed playing time ill0
Inhaltszusammenfassung zur Seite Nr. 6
Locating a specific point in a track — Manual Search Radio During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. SEEK/AMS To search forward Memorizing stations automatically To search backward — Best Tuning Memory (BTM) Note The unit selects the stations with the strongest ” or “ ” appears in the display, that If “ signals and memorizes them in the order of means you have reached the beginning or the end of the their frequencies. You
Inhaltszusammenfassung zur Seite Nr. 7
CD Player/Radio Receiving the memorized Storing the station names —Station Memo stations You can assign a name to each radio station 1 Press (SOURCE) repeatedly to select the and store it in memory. The name of the desired band. station currently tuned in appears in the display. You can store up to eight characters for a station. 2 Press the number button ((1) to (10)) momentarily where the desired station is Storing the station names stored. 1 Tune in a station whose name you want If you cannot
Inhaltszusammenfassung zur Seite Nr. 8
Displaying the station name Press (DSPL) during radio reception. Other Functions FM1 SUR EQ 3 WRKISS Each time you press (DSPL), the item Adjusting the sound changes as follows: z Station name* z Frequency z Clock characteristics You can adjust bass, treble, balance and fader. * If the station name is not stored, “NO NAME” Each source can store the bass and treble level appears in the display for one second. respectively. Erasing the station name 1 Select the item you want to adjust
Inhaltszusammenfassung zur Seite Nr. 9
Radio/Other Functions/CD/MD Changer With Optional Equipment Changing the sound and CD/MD Changer display settings You can set: You can control up to 10 CD changers and MD • BEEP to turn on or off the beeps. changers with this unit. • DIM (Dimmer) to change the brightness of the display . • D.INFO (dual information) to display the clock and the play mode at the same time Playing a CD or MD (ON) or to display the information alternately (OFF). Press (SOURCE) until the desired •LOUD (Loudness) to e
Inhaltszusammenfassung zur Seite Nr. 10
Displaying the recording date of the currently selected MD Playing tracks repeatedly — Repeat Play Press (DSPL) for two seconds during MD playback. You can select: The recording date of the track is displayed •REP 1 to repeat a track. for about three seconds. •REP 2 to repeat a disc. •REP 3 to repeat all the discs in the current Locating a specific track changer. — Automatic Music Sensor (AMS) During playback, press either side of 1 During playback, press (SHIFT), then (SEEK/AMS) once for each t
Inhaltszusammenfassung zur Seite Nr. 11
CD/MD Changer Displaying the disc memo Labeling a CD — Disc Memo Press (DSPL) during CD playback. (CD changer with custom file function) DISC NAME CD1 DISC SUR EQ You can label each disc with a personalized 1 SCHUBERT name. You can enter up to eight characters for a disc. If you label a CD, you can locate a disc Each time you press (DSPL) during CD by name and select the specific tracks for playback, the item changes as follows: playback (page 12). z Elapsed playback time z Disc name Cl
Inhaltszusammenfassung zur Seite Nr. 12
2 Press either side of (SEEK/AMS) to select Locating a disc by name the track number you want to skip and press (5) (ENTER). — List-up (CD changer with custom file CD2 DISC TRACK function or MD changer) SUR EQ 5 3 SKIP PLAY MODE ENTER You can use this function for the discs that have been assigned a custom name. For more The indication changes from “PLAY” to information on disc names, refer to “Labeling a “SKIP.” If you want to return to “PLAY,” CD” (page 11). press (5) (ENTER) again. 1 Press
