Bedienungsanleitung Lenoxx Electronics 820M

Inhaltszusammenfassung zur Seite Nr. 1

CASSETTE PLAYER
MODEL 820M
Operating Instructions
1 2 3
4
5
8
7
6
1. STOP BUTTON
2. PLAY BUTTON
3. FAST FORWARD BUTTON
4. HEADPHONE JACK
5. VOLUME CONTROL
6. BASS BOOST SWITCH
7. BATTERY DOOR (at back)
8. BELT CLIP (at back)
--- 1 ---
IB-820M(B)-WM-E-050703
20M(CR)-WM-E-050703.p65 1 5/9/03, 12:01 AM

Inhaltszusammenfassung zur Seite Nr. 2

BATTERY INSTALLATION Slide the BATTERY DOOR in the direction shown by the arrow to open the door and insert 2 “AA” batteries, taking care not to reverse the positive and negative polarities. Alkaline batteries are recommended and will normally provide more playing time. Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable • (nickel-cadmium) batteries. NOTE: Remove the batteries during long periods (about 30 days or • more) of nonuse, possible battery le

Inhaltszusammenfassung zur Seite Nr. 3

TAPE PLAY 1. Check whether or not the tape is tight before it is inserted. To keep the tape from tangling, firmly • wind the tape before inserting it into the player. Use of a cassette with more than 90 • minutes, such as C-120 (120 minutes), is not recommended. The extreme thinness of this tape may damage this set. 2. Open the CASSETTE DOOR by hand, face the side to be played toward you, and insert the cassette tape. Close the CASSETTE DOOR. 3. Connect the headphones to the jack and adjust the

Inhaltszusammenfassung zur Seite Nr. 4

GENERAL SPECIFICATION Tape function : Play / Fast Forward / Stop Speed deviation : +3% -2% Frequency response : 200Hz - 6kHz Output power (Max) : More than 20 mW/ch Power source : 2 “AA” Alkaline batteries (not included) LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you su