Inhaltszusammenfassung zur Seite Nr. 1
Instructions for Installation and Use
Electric Hood
Models HE91 and HE61
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS RECOMMENDATIONS AND SUGGESTIONS 3 INSTALLATION 4 - 8 ELECTRICAL CONNECTION 9 GETTING TO KNOW YOUR COOKER HOOD 10 CARE AND CLEANING 11-12 AFTER SALES SERVICE 14 GUARANTEE 15 KEY CONTACTS Back Cover CE marking certifies that this appliance conforms to the following EEC directives:- - Low Voltage Equipment 72/23/EEC - Electromagnetic Compatibility 89/336/EEC Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the saf
Inhaltszusammenfassung zur Seite Nr. 3
RECOMMENDATIONS AND SUGGESTIONS Using your new Cooker Hood is very simple. Nevertheless, to get the best results it is important that you read this manual thoroughly before installing and using your appliance for the first time. INSTALLATION • All installation and repairs should be carried out by a qualified technician in accordance to regulations in force. The manufacturer will not be held liable for any damage resulting from incorrect or improper installation. After having removed the pack
Inhaltszusammenfassung zur Seite Nr. 4
INSTALLATION Dimensions Hood Type 60 90 L 598 898 Technical Characteristics Basic Hood Supply Voltage 220-240V Supply Frequency 50Hz nd Insulation Class II Weight 12kg Motor Qty Power 6/40K-A 1 150W 6/50K-A 1 190W 8BS/28K-A-P 1 205W GB 4
Inhaltszusammenfassung zur Seite Nr. 5
INSTALLATION Components Ref. Qty Ducted Version 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 7.1 2 Hood Body Fixing Brackets 7.2.1 2 Upper Chimney Section Fixing Brackets 8a 1 Right Air Outlet Grill 8b 1 Left Air Outlet Grill 9 1 Reducer Flange ø 150-120 mm 11 8 Wall Plugs 12a 8 Screws 4.2 x 44,4 12d 2 Screws M4 x 25 12e 6 Screws 2.9 x 9.5 14 1 Hood Body Air Outlet Extension Piece consisting of two half
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLATION Wall drilling and bracket fixing Wall marking: Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. Draw a horizontal line at 650 mm above the hob for installation without the back panel, or at height H (height of the visible part of the panel) for installation with the back panel (see diagram above). Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper
Inhaltszusammenfassung zur Seite Nr. 7
Mounting the hood body Screw the two screws 12d supplied onto the brackets 7.1 Hook the hood body onto bracket 7.1, centring it around the vertical line. Using the adjusting screws 12d underneath the hood to level the hood body. Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is left to the installer. To install a ø 120 mm air exhaust connection, in
Inhaltszusammenfassung zur Seite Nr. 8
Chimney assembly Upper chimney section Slightly widen the two sides of the upper chimney and hook them behind the brackets 7.2.1, making sure that they are properly housed. Secure the sides to the brackets using the 4 screws 12e supplied. Lower chimney section Insert the lower chimney fixing bush 17 in the top of the hood body and rotate it 90° clockwise as far as it will go. Slightly widen the two sides of the chimney and hook them between the upper chimney section and the wall, making
Inhaltszusammenfassung zur Seite Nr. 9
Electrical Connection WARNING: This appliance MUST be earthed. Connect to a 230 - 240V A.C. Supply only. Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to and not more than 1.25m away from the appliance and capable of electrical isolation. Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below. Note: The removed plug cannot be used for any ot
Inhaltszusammenfassung zur Seite Nr. 10
GETTING TO KNOW YOUR COOKER HOOD The Controls L Light Switches the lighting system L Light Switches the lighting system on and off. on and off. M Motor Switches the extractor motor M Motor Switches the extractor motor on and off. on and off. V Speed Varies the operating speed V Speed Sets the operating speed of the extractor: of the extractor, from minimum - used for a 1. Low Speed, used for a continuous and silent continuous and silent air change in the presence of air change in the presence of
Inhaltszusammenfassung zur Seite Nr. 11
CARE AND CLEANING Before cleaning your cooker hood or carry out any maintenance, switch off and remove the plug from the socket to disconnect it from the electricity supply. Grease Filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS The filters must be cleaned every 2 months of operation, or more frequently with heavy usage, and can be washed in a dishwasher. Remove the filters one at a time by pushing them towards the back and pulling down at the same time. Wash the filters, taking care
Inhaltszusammenfassung zur Seite Nr. 12
CARE AND CLEANING CHARCOAL FILTER: REPLACING THE ACTIVATED CHARCOAL FILTER The filters are not washable and must be replaced after every 4 months of operation, or more frequently with heavy usage. Remove the grease filters. Remove the saturated activated charcoal filters as shown (A). Dispose of the charcoal filters. Fit the new filters (B). Replace the grease filters. LIGHT REPLACEMENT 15W neon light 40W incandescent light 20W halogen light Remove the metal terminals T fixing the gl
Inhaltszusammenfassung zur Seite Nr. 13
NOTES GB 13
Inhaltszusammenfassung zur Seite Nr. 14
After Sales Service "No company is better positioned to offer an after sales service on a Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12 months parts and labour guarantee expires we offer the followin
Inhaltszusammenfassung zur Seite Nr. 15
Guarantee "Satisfaction guaranteed or your money back" We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if you prefer, give you your money bac
Inhaltszusammenfassung zur Seite Nr. 16
Key Contacts After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.uk Republic of Ireland: 1850 302 200 Note: Our operators will require the following information: Model number: Serial number: Extended Warranties UK: 08709 088 088 (Open 8 to 8
