Inhaltszusammenfassung zur Seite Nr. 1
Instructions for Installation and Use
Electric Hood
Model HDI90X
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS RECOMMENDATIONS AND SUGGESTIONS 3 INSTALLATION 4 - 9 ELECTRICAL CONNECTION 10 GETTING TO KNOW YOUR COOKER HOOD 11 CARE AND CLEANING 12 AFTER SALES SERVICE 14 GUARANTEE 15 KEY CONTACTS Back Cover CE marking certifies that this appliance conforms to the following EEC directives:- - Low Voltage Equipment 72/23/EEC - Electromagnetic Compatibility 89/336/EEC Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe
Inhaltszusammenfassung zur Seite Nr. 3
RECOMMENDATIONS AND SUGGESTIONS Using your new Cooker Hood is very simple. Nevertheless, to get the best results it is important that you read this manual thoroughly before installing and using your appliance for the first time. INSTALLATION • All installation and repairs should be carried out by a qualified technician in accordance to regulations in force. The manufacturer will not be held liable for any damage resulting from incorrect or improper installation. After having removed the pack
Inhaltszusammenfassung zur Seite Nr. 4
INSTALLATION Dimensions GB 4
Inhaltszusammenfassung zur Seite Nr. 5
INSTALLATION Components Ref. Qty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 7.1 1 Telescopic frame complete with extractor, consisting of: 7.1a 1 Upper Frame 7.1b 1 Lower Frame 8a 1 Right Air Outlet Grill 8b 1 Left Air Outlet Grill 9 1 Reducer Flange ø 150-120 mm 14 1 Hood Body Air Outlet Extension Piece consisting of two half shells 14.1 1 Air Outlet Connection Extension 15 1 Air Ou
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLATION Drilling the Ceiling/shelf and fixing the frame DRILLING THE CEILING / SUPPORT SHELF Use a plumb line to mark the centre of the hob on the ceiling/support shelf. Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. Mark the centres of the holes in the template. Drill the holes at the points marked: For concrete ceilings, drill for plugs app
Inhaltszusammenfassung zur Seite Nr. 7
INSTALLATION FIXING THE FRAME Before fixing, seperate the Upper section 2.1 and the Lower section 2.2 from the frame by unscrewing the screws 12c. Then seperate the two sections of the frame (Upper and Lower) by unscrewing the 8 side screws. Fix the Fixing Part of the Upper Chimney 26 to the hanging kit using the 2 screws 12w (M3 x 8). Upper Frame Align the power supply cable feed hole. Fix the upper frame to the ceiling of shelf using: For concrete ceilings, use the appropriate plugs for
Inhaltszusammenfassung zur Seite Nr. 8
INSTALLATION Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is left to the installer. To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet. Fix the pipe in position using the pipe clamps 25 provided. Remove any activated charcoal filters. RECIRCULATION VERSION AIR OUTLET Push the connection 15 onto the a
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION Connections Before fixing the hood body to the frame: Remove the grease filters from the hood body. Remove any activated charcoal filters. From below, use the 4 screws 12f (M6 x 10) provided, to fix the hood body to the frame. Fix the Lower Chimney to the Hood Canopy using the 2 screws 12c (2.9 x 9.5) provided. ELECTRICAL CONNECTIONS WARNING - THIS APPLIANCE MUST BE EARTHED This appliance must be connected by a competent person eg. NICEIC registered contractor, in accordance
Inhaltszusammenfassung zur Seite Nr. 10
Electrical Connection WARNING: This appliance MUST be earthed. Connect to a 230 - 240V A.C. Supply only. Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to and not more than 1.25m away from the appliance and capable of electrical isolation. Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below. Note: The removed plug cannot be used for any ot
Inhaltszusammenfassung zur Seite Nr. 11
GETTING TO KNOW YOUR COOKER HOOD The Controls L Light Switches the lighting system on and off. V1 Motor Switches the extractor motor off and on at low speed. Used to provide a continuous and silent air change in the presence of light cooking vapours. V2 Speed Reduces the operating speed. V3 Speed Increases the operating speed. V4 Intensive Maximum speed, used to eliminate the highest cooking vapour emission. Speed Switches off automatically after 10 minutes operation. Can also be switched off ma
Inhaltszusammenfassung zur Seite Nr. 12
CARE AND CLEANING Before cleaning your cooker hood or carry out any maintenance, switch off and remove the plug from the socket to disconnect it from the electricity supply. CLEANING METAL GREASE FILTERS The filters must be cleaned every 2 months of operation, or more frequently with heavy usage, and can be washed in a dishwasher. Remove the filters one at a time by pushing them towards the back and pulling down at the same time. Wash the filters, taking care not to bend them. Allow them to
Inhaltszusammenfassung zur Seite Nr. 13
NOTES GB 13
Inhaltszusammenfassung zur Seite Nr. 14
After Sales Service "No company is better positioned to offer an after sales service on a Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12 months parts and labour guarantee expires we offer the followin
Inhaltszusammenfassung zur Seite Nr. 15
Guarantee "Satisfaction guaranteed or your money back" We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if you prefer, give you your money bac
Inhaltszusammenfassung zur Seite Nr. 16
Key Contacts After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.uk Republic of Ireland: 1850 302 200 Note: Our operators will require the following information: Model number: Serial number: Extended Warranties UK: 08709 088 088 (Open 8 to 8
