Inhaltszusammenfassung zur Seite Nr. 1
CASSETTE RECEIVER
RECEPTOR-REPRODUCTOR DE CASSETTE
RADIOCASSETTE
KS-FX210
KS-FX210 KS-FX210
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
INSTRUCTIONS
reference.
MANUAL DE INSTRUCCIONES
MANUEL D
Inhaltszusammenfassung zur Seite Nr. 2
How to reset your unit Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same time for several seconds. This will reset the built-in microcomputer. (Standby/On/Attenuator) SEL (Select) Note: • Your preset adjustments — such as preset channels or sound adjustments — will also be erased. 2 EN02-03-KS-FX210[J]f 2 10/8/01, 10:13 AM KS-FX210 [EN] GET0052-001A [J] ENGLISH
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .............................. 2 OTHER MAIN FUNCTIONS ............... 13 Setting the clock ....................................... 13 LOCATION OF THE BUTTONS ........... 4 Detaching the control panel ..................... 14 Control panel....................................
Inhaltszusammenfassung zur Seite Nr. 4
LOCATION OF THE BUTTONS Control panel io ; a RNDRPT CD-CH A 23 MOST TP PTY TP LOUD BEAT POP SOFT s d f g Display window 3 4 56 1 2 78 KS-FX210 KS-FX210 9 p q w e rty u 1 (Standby/On/Attenuator) button Display window 2 LOUD (Loudness) button i RND (Random) indicator 30 (Eject) button o RPT (Repeat) indicator 4 Cassette compartment ; Band indicators 5 1 / ¡ (PROG program) buttons FM1, FM2, FM3, 6 CD-CH button AM 7 AM button a CD-CH (CD Changer) indicator 8 FM button s MO(Monaural) indicator, ST(St
Inhaltszusammenfassung zur Seite Nr. 5
BASIC OPERATIONS 13 2 Turning on the power 4 Adjust the sound as you want (see pages 11 – 12). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. • When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not button briefly again. have to press this button to turn on t
Inhaltszusammenfassung zur Seite Nr. 6
RADIO BASIC OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. Searching a station manually: Note: When a cassette is in the cassette compartment, you Manual search cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio. 1 Select the band (FM1 – 3, AM). Searching a st
Inhaltszusammenfassung zur Seite Nr. 7
3 Tune into a station you want while Storing stations in memory “M” is flashing. To tune into stations You can use one of the following two methods to of higher frequencies. store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune into stations of lower frequencies. FM station automatic preset: SSM • If you release your finger from the button, You can preset 6 local FM stations in each FM
Inhaltszusammenfassung zur Seite Nr. 8
4 Repeat the above procedure to store Manual preset other stations into other preset You can preset up to 6 stations in each band (FM1, numbers. FM2, FM3 and AM) manually. Ex: Storing an FM station of 88.3 MHz into the Notes: • A previously preset station is erased when a new station preset number 1 of the FM1 band is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, during w
Inhaltszusammenfassung zur Seite Nr. 9
Changing the AM/FM channel intervals Other convenient tuner When using this unit in an area other than North functions or South America: When this unit is shipped from the factory, the Scanning broadcast stations channel intervals are set to 10 kHz for AM and 200 kHz for FM. You can change the channel intervals When you press RPT/SCAN while RPT SCAN by following the procedure below. listening to the radio, station 1 Press SEL (Select) for more than 2 seconds. scanning starts. Each time a “CLOCK
Inhaltszusammenfassung zur Seite Nr. 10
TAPE OPERATIONS To stop play and eject the cassette. Listening to a cassette Press 0. You can playback type 1 (normal) tapes. Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. 1 Turn on the power. • You cannot change the source if the cassette is /I/ATT still in the cassette compartment. To change source, you must eject the cassette first. • You can also eject the cassette by pressing 0 Note on One-Touch Operat
Inhaltszusammenfassung zur Seite Nr. 11
|\ SOUND ADJUSTMENTS Adjusting the sound Turning on/off the loudness function You can adjust the sound characteristics to your preference. The human ear is less sensitive to low and high frequencies at low volumes. 1 Select the item you want to adjust. The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels. Each time you press the button, Each time you press LOUD, the loudness function the adjustable items change as turns on and off alternately. f
Inhaltszusammenfassung zur Seite Nr. 12
4 To turn on or off the loudness Storing your own sound function. adjustments Each time you press LOUD, the loudness function turns on and off alternately. See page 11 for details. You can adjust the sound modes (BEAT, POP, SOFT) to your preference and store your own LOUD adjustments in memory. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 5 Repeat steps 2 and 3 to adjust the other items. 1 Call up the sound mode
Inhaltszusammenfassung zur Seite Nr. 13
OTHER MAIN FUNCTIONS To check the current clock time or change Setting the clock the display mode. 1 Press and hold the button for more Press DISP (display) repeatedly. DISP than 2 seconds. Each time you press the button, “CLOCK H”, “CLOCK M” the display mode changes as or “AREA” appears on the follows: display. • During tuner operation: 2 Set the hour. Frequency Clock 1 Select “CLOCK H” if not shown on the display. 2 Adjust the hour. • During tape operation: 12 Play mode (tape direction) Cloc
Inhaltszusammenfassung zur Seite Nr. 14
Attaching the control panel Detaching the control panel 1 Insert the left side of the control You can detach the control panel when leaving panel into the groove on the the car. panel holder. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the control pa
Inhaltszusammenfassung zur Seite Nr. 15
CD CHANGER OPERATIONS We recommend that you use one of the CH-X To check the elapsed playing time. series with your unit. If you have another CD automatic changer, consult Press DISP (display) DISP your JVC car audio dealer for connections. repeatedly. • For example, if your CD automatic changer is one Each time you press the of the KD-MK series, you need a cord (KS-U15K) button, the display mode for connecting it to this unit. changes as follows. Before operating your CD automatic changer: Ela
Inhaltszusammenfassung zur Seite Nr. 16
To go to a particular disc directly To playback tracks repeatedly (Repeat Play) Each time you press RPT/SCAN (Repeat/Scan) 7 8 9 10 11 12 while playing a CD, CD repeat play mode changes as follows: RPT SCAN RPT1 RPT2 Canceled Press the number button corresponding to the disc number to start its playback. • To select a disc number from 1 – 6: Mode RPT Plays repeatedly Press 1 (7) – 6 (12) briefly. Indicator • To select a disc number from 7 – 12: RPT1 Lights The current track (or Press and hold 1
Inhaltszusammenfassung zur Seite Nr. 17
MAINTENANCE This unit requires very little attention, but you will CAUTIONS: be able to extend the life of the unit if you follow • Do not play the tapes with peeling labels; the instructions below. otherwise, they can damage the unit. • Tighten tapes to remove slack since loose tape To clean the heads may become entangled with the mechanism. • Do not leave a cassette in the cassette compartment after use, as the tape may become slack. • Clean the heads after every 10 hours of use using a wet-ty
Inhaltszusammenfassung zur Seite Nr. 18
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • A cassette tape cannot be You have tried to insert a Insert the cassette with the inserted. cassette in the wrong way. exposed tape facing right. • Cassette tapes become hot. This is not a malfunction. • Tape sound is at very low The tape head is dirty. Clean it with a head cleaning level and sound quality is tape. degraded. • Sound is sometimes
Inhaltszusammenfassung zur Seite Nr. 19
SPECIFICATIONS AUDIO AMPLIFIER SECTION CASSETTE DECK SECTION Maximum Power Output: Wow & Flutter : 0.15% (WRMS) Front : 40 W per channel Fast-Wind Time : 190 sec. (C-60) Rear : 40 W per channel Frequency Response : 50 to 14 000 Hz Continuous Power Output (RMS): (normal tape) Front : 16 W per channel into 4 Ω , 40 Hz Signal-to-Noise Ratio : 52 dB to 20 000 Hz at no more than Stereo Separation : 40 dB 0.8% total harmonic distortion. Rear : 16 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more
Inhaltszusammenfassung zur Seite Nr. 20
Cómo reposicionar su unidad Pulse y mantenga pulsado los botones SEL (Selección) y (En espera/Encendido/ Atenuador) al mismo tiempo durante varios segundos. Esto hará que se reposicione el microcomputador incorporado. (En espera/Encendido/Atenuador) SEL (Selección) NOTA: • También se borrarán los ajustes preestablecidos por usted — como por ejemplo los canales preajustados o los ajustes de sonido. 2 SP02-03-KS-FX210[J]f 2 10/8/01, 10:17 AM KS-FX210 [SP] GET0052-001A [J] ESPAÑOL
