Inhaltszusammenfassung zur Seite Nr. 1
TEC Electronic Cash Register
MA-1595-1 SERIES
Owner's Manual
Inhaltszusammenfassung zur Seite Nr. 2
“This Class A digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.” “Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.” FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipme
Inhaltszusammenfassung zur Seite Nr. 3
Safety Summary EO1-11152 6DIHW\6XPPDU\ Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual,
Inhaltszusammenfassung zur Seite Nr. 4
Safety Summary EO1-11152 If foreign objects (metal When unplugging the power cords, ’LVFRQQHFW ’LVFRQQHFW fragments, water, liquids) enter be sure to hold and pull on the plug WKH SOXJ WKH SOXJ the machines, first turn off the portion. Pulling on the cord portion power switches and disconnect may cut or expose the internal wires the power cord plugs from the and cause fire or electric shock. outlet, and then contact your authorized TOSHIBA TEC representative for assistance.
Inhaltszusammenfassung zur Seite Nr. 5
1. STAND-ALONE LEVEL OPERATOR’S GUIDE
Inhaltszusammenfassung zur Seite Nr. 6
EO1-11152 MA-1595-1 SERIES TABLE OF CONTENTS Page 1. TO OUR CUSTOMERS-------------------------------------------------------------------------------- 1- 1 2. ACCESSORIES------------------------------------------------------------------------------------------1- 1 3. APPEARANCE AND NOMENCLATURE---------------------------------------------------------3- 1 4. MODE LOCK AND MODE SELECTOR KEYS ------------------------------------------------- 4- 1 4.1 Mode Lock--------------------------
Inhaltszusammenfassung zur Seite Nr. 7
EO1-11152 MA-1595-1 SERIES Page 10.18 HASH Department Entry, HASH PLU Entry --------------------------------------------------- 10-15 10.19 Sub-Link Department Entry------------------------------------------------------------------------ 10-15 10.20 Sub-Link PLU Entry --------------------------------------------------------------------------------- 10-16 10.21 Urgent PLU Maintenance -------------------------------------------------------------------------- 10-16 10.22 Returned Mer
Inhaltszusammenfassung zur Seite Nr. 8
EO1-11152 MA-1595-1 SERIES Page 11. JOURNAL AND RECEIPT PAPER-END DETECTOR-------------------------------------- 11- 1 12. ECR PRINTER MOTOR LOCK DETECTOR -------------------------------------------------- 11- 1 13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR ------------------------------------ 13- 1 14. PRINTER HEAD OPEN DETECTOR ------------------------------------------------------------ 13- 1 15. GENERAL MAINTENANCE----------------------------------------------------------------------
Inhaltszusammenfassung zur Seite Nr. 9
1. TO OUR CUSTOMERS EO1-11152 1. TO OUR CUSTOMERS 1. TO OUR CUSTOMERS Thank you for choosing the TEC electronic cash register MA-1595 series. This instruction manual provides a description of the functions and handling of this ECR and should be read carefully to ensure optimum performance. Since every consideration has been given to safety and reliability, there is no danger of damaging the machine by incorrect operation. Please refer to this manual whenever you have any questions c
Inhaltszusammenfassung zur Seite Nr. 10
3. APPEARANCE AND NOMENCLATURE EO1-11152 3. APPEARANCE AND NOMENCLATURE 3. APPEARANCE AND NOMENCLATURE Interface Connectors Customer Display Printer Cover Operator Display Journal Window COM3 COM2 COM1 Receipt Outlet Mode Lock Power Switch Drawer Keyboard Power Cord Printer Cover Mode Lock The cover for the Receipt or Journal paper It selects the type of register operations. holder and the printer. (Section 4) Receip
Inhaltszusammenfassung zur Seite Nr. 11
4. MODE LOCK AND MODE SELECTOR KEYS EO1-11152 4.1 Mode Lock 4. MODE LOCK AND MODE SELECTOR KEYS 4.1 Mode Lock (POSITION) (FUNCTION) X MGR SET In this position, the ECR will allow programming REG operations. (LOCK position) The register operations are Z locked when the Mode Lock is in this position. REG Meanwhile, the Display Message and the current Key SET time are displayed. REG Normal cash register operations are carried out in this mode. However, the ope
Inhaltszusammenfassung zur Seite Nr. 12
5. DISPLAY EO1-11152 5. DISPLAY 5. DISPLAY The operator display is located at the top of the ECR just above the keyboard. OPERATOR DISPLAY (Front Display) Upper Row DPT X Lower Row () ( ) TL ST The customer display can be moved horizontally, and thus is fully adjustable according to the position of the customer. CUSTOMER DISPLAY (Rear Display) DPT X Lower Row TL ST 5- 1
Inhaltszusammenfassung zur Seite Nr. 13
5. DISPLAY EO1-11152 5.1 Upper Row (16-digit dot windows) 5.1 Upper Row (16-digit dot windows) Alphanumeric characters are displayed here as messages, sale item descriptors, prompts for the operator, etc. depending on the Mode Lock position and the operation sequence. (1) Mode Indications “LOCK” Mode If the display store message is preprogrammed, the message is displayed. Whether the message scrolls with maximum 64 characters or non-scrolls with maximum 16 characters is a program op
Inhaltszusammenfassung zur Seite Nr. 14
5. DISPLAY EO1-11152 5.1 Upper Row (16-digit dot windows) (3) Error Messages (in any mode except “LOCK”) When an error occurs, an error message (programmable) is displayed, with an error buzzer generated (a long tone). 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 X X X X X X X X X X X X X X X X Error Message (max. 16) Read the Error Message, depress the [C] key to cancel the error status and tone, operate the sequence again after removing the cause of the error. The following tab
Inhaltszusammenfassung zur Seite Nr. 15
5. DISPLAY EO1-11152 5.2 Lower Row (10-digit 7-segment Numeric Display) ERROR MESSAGE TABLE (continued) Error Message Cause of the Error (Standard Setting) HEAD OPEN ERROR Print head remains open. CUTTER ERROR Cutter home position is misaligned. SLIP OFF LINE Slip Printer is in off line status. SLIP PAPER OUT No slip paper is set. It is recommended to prepare a copy of the above table, and place it near the ECR. 5.2 Lower Row (10-digit 7-segment Numeric Display) (1) Numeric Di
Inhaltszusammenfassung zur Seite Nr. 16
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11152 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR 6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR This chapter shows the outline of set-up procedure of the ECR before actually starting the register operation. WARNING! Turn the POWER SWITCH to OFF before connecting the power cord. REGMA S 1. Remove the ECR from the carton. And take out all the parts and accessories. 2. Plac
Inhaltszusammenfassung zur Seite Nr. 17
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11152 6.1 Installing/Replacing the Receipt/Journal Roll 6. Install the Receipt and Journal rolls (referring to the following section “Installing the Receipt/Journal Roll”). 6.1 Installing/Replacing the Receipt/Journal Roll Turn the Mode Lock to the LOCK position using the Mode Selector Key to perform the paper roll installation in this section. CAUTION! Never touch the Cutter Knob. Doing so may cau
Inhaltszusammenfassung zur Seite Nr. 18
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11152 6.1 Installing/Replacing the Receipt/Journal Roll 2. Pull up the Printer Release Lever to open the Receipt Cover Frame Ass’y. 2 1 3. Remove the old Receipt Roll, if any. Unstick the end of the Receipt, and then load the Receipt Roll into the printer. 4. Pull the end of receipt roll forward until the area with the glue on the paper is past the Cutter Block.
Inhaltszusammenfassung zur Seite Nr. 19
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11152 6.1 Installing/Replacing the Receipt/Journal Roll Installing/Replacing the Journal Roll 1. When installing the Journal Roll for the first time, skip to Step 3. When replacing the Journal Roll, cut the paper at the arrow indicating position in the figure. CAUTION: Never try to pull out the remaining paper end by hand. It may cause a paper jam. 2. Remove the Journal Take-up Reel from the holder, then
Inhaltszusammenfassung zur Seite Nr. 20
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11152 6.1 Installing/Replacing the Receipt/Journal Roll 6. Close the Journal Cover Frame Ass’y by pushing the shadowed portion until it clicks. 7. Insert the paper end into the slit of the Take-up Reel and wind it around the reel twice or three times. 8. Set the Journal Take-up Reel into the Reel Holder. 9. Attach the Printer Cover.
