Inhaltszusammenfassung zur Seite Nr. 1
ON OFF AUTO
VOLUME CHANNEL
TV/AV MENU ENTER
®
ELECTRONICS CORP .
0
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase of the IMPORTANT NOTICE Audiovox VOH1502 drop down TV/Video An LCD panel and/or video monitor may be Monitor. The VOH1502 has been designed to installed in a motor vehicle and visible to the give you and your family many years of video driver if the LCD panel or video monitor is used entertainment in the mobile environment. Please for vehicle information, system control, rear or read the directions that follow to familiarize side observation or navig
Inhaltszusammenfassung zur Seite Nr. 3
TELEVISION RECEPTION FEATURES This entertainment system is designed primarily • 15” TFT (Thin Film Transistor) Active Matrix for viewing pre-recorded movies or playing video LCD (Liquid Crystal Display) Monitor games. Television reception in a moving vehicle • OSD (On Screen Display) For Control Of will be limited and in some areas will not be Picture Quality And Functions possible due to weak and variable signal • Full Function Remote Control strength. Television viewing in a s
Inhaltszusammenfassung zur Seite Nr. 4
FRONT PANEL CONTROLS 1. POWER 2. VOLUME p/q 3. TV/AV 4. INFRARED RECIEVER AND INFRARED TRANSMITTER 5. THREE POSITION DOME LIGHT SWITCH 6. SCREEN RELEASE 7. MENU 8. CHANNEL p/q 9. ENTER 10. DOME LIGHT Figure 1. FRONT PANEL CONTROLS 3
Inhaltszusammenfassung zur Seite Nr. 5
FRONT PANEL CONTROLS 6. Screen Release*– Slides in the direction (See Figure 1) of the arrow to release the drop down screen. 1. Power Button – Turns the Monitor ON and OFF. 7. Menu Button – Press the MENU button, The MENU display appears. Use the 2. Volume p/q – Controls the volume of the channel p and q buttons to highlight the external Speakers or wired Headphone desired function, then press the ENTER jacks if connected. Also, used to adjust the button to confirm your se
Inhaltszusammenfassung zur Seite Nr. 6
BATTERY INSTALLATION (See Figure 2) 6 TV POWER MUTE TV/VIDEO 7 1 Figure 2. BATTERY INSTALLATION ERASE/ 8 2 3 ADD 1 4 5 6 Before attempting to operate the Remote 2 Control, install the batteries as described below. AUTO 9 7 8 9 PROGRAM 1) Turn the Remote Control face down. Press PICTURE ENTER 10 0 1- SELECT down on the ridged area of the battery cover, and slide it off. 11 CH σ 2) Install Two “AAA” batteries as shown. 3 VOL. – VOL . + Make sure that proper polarity (+ or -) is 4
Inhaltszusammenfassung zur Seite Nr. 7
NOTE: These buttons will not affect the REMOTE CONTROL OPERATION volume of wireless headphones or a wired (See Figure 3) RF modulator. When using these devices Monitor Controls: the volume must be adjusted with the 1. TV POWER headphone volume control or with your Press this button to turn on the VOH1502. radio’s volume control. Press the button again to turn the set off. 5. MENU Button 2. Direct Access (0-9,1--) Number Buttons Press the MENU button. The MENU Use these b
Inhaltszusammenfassung zur Seite Nr. 8
The stored channel numbers are displayed automatically turn off if adjustments are not in GREEN on the screen and the erased made within five seconds. channel numbers are displayed in RED. NOTE: This function is also available in the menu options under “Auto-Program” 9. AUTO PROGRAM Button Select the correct antenna input (see page 12, Setting the “Antenna Input”) Press the AUTO PROGRAM button. All of the channel numbers for TV or CABLE TV will be scanned. The active channels will
Inhaltszusammenfassung zur Seite Nr. 9
5. STOP Button VCP CONTROLS Press this button to stop the videotape. 1. VCP POWER Button 6. REPLAY Button This button is used to turn an optional Press this button will rewind the videotape AUDIOVOX VCP ON and OFF. and immediately begin playback when the videotape is fully rewind. 2. ”REW” REWIND Button If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while the tape is playing, the VCP will go into rewind search mode. For m
Inhaltszusammenfassung zur Seite Nr. 10
CHANNEL ADJUSTING THE PICTURE PICTURE When watching TV programs, the quality of the COLOR CONTRAST picture can be adjusted to suit your taste. BRIGHTNESS 32 BRIGHTNESS SHARPNESS ENTER 1. Press MENU. The main menu appears. TINT – + RESET MENU MAIN MENU SELECT VIDEO CLOSED CAPTION 4. Adjusting the level: SET PICTURE AUTO-PROGRAM Press VOLUME – to decrease the brightness. ANTENNA INPUT Press VOLUME + to increase the brightness. V-CHIP PROTECT SET PASSWORD VOLUME
Inhaltszusammenfassung zur Seite Nr. 11
Description Of Adjustment Items: ITEM Adjustment Press VOLUME - to Press VOLUME + to Decrease picture contrast for Increase picture contrast for CONTRAST soft color vivid color Darken the picture Brighten the picture BRIGHTNESS Decrease picture sharpness Increase picture sharpness SHARPNESS Make skin tones becomes Mark skin tones becomes TINT Reddish Greenish Decrease color intensity Increase color intensity COLOR To Restore the Factory Settings Select picture while the main
Inhaltszusammenfassung zur Seite Nr. 12
2. Press either CHANNEL p or q to highlight SETTING CLOSED CAPTIONING the function. CLOSED CAPTIONING Make sure the highlight bar is on CLOSED Closed captioning lets you display the audio CAPTION and then press ENTER. portion of a program as text on the TV screen. This is useful to the hearing impaired or anyone CHANNEL who wants to watch a program without the MAIN MENU CAPTION SELECT VIDEO CAPTION 1 sound. There are two types of closed captioning CLOSED CAPTION CAPTION 2 SET PICT
Inhaltszusammenfassung zur Seite Nr. 13
CABLE TV (CATV) OPERATION AUTO PROGRAM FUNCTION In addition to normal broadcast reception of VHF 1. Press the MENU button. The Main Menu will and UHF channels, if you are a cable TV appear on the screen. subscriber, your new TV is capable of receiving 2. Press the channel p or q buttons to highlight many unscrambled cable channels without the AUTO PROGRAM and press ENTER. The use of a converter box. Program Menu will appear on the screen. 3. Press the channel p or q buttons to highlig
Inhaltszusammenfassung zur Seite Nr. 14
4. Enter the NEW password (4 digits) using the SETTING THE V-CHIP numeric buttons (0-9). An age limitation can be set to forbid children to NOTE: The initial PASSWORD is 1111. If you see and hear violent scenes or pictures. forget the password, you cannot set the V-CHIP. The V-CHIP responds to “TV RATING” and To avoid forgetting the password, write it down “MOVIE RATING”. To use the V-CHIP function, and Keep in a Safe place. you must register a password. 1. Press MENU. The Ma
Inhaltszusammenfassung zur Seite Nr. 15
5. Press either VOLUME + or VOLUME – to TO SET THE V-CHIP adjust the control level of the desired setting. 1. Press MENU. The Main Menu will appear. 6. TV RATINGS CHART: MENU MAIN MENU • TV Y: ALL children SELECT VIDEO CLOSED CAPTION • TV Y7: 7 years old and above SET PICTURE AUTO-PROGRAM • TV G: General Audience ANTENNA INPUT V-CHIP PROTECT SET PASSWORD 2. Press the CHANNEL ? or ? buttons to highlight the function. Make sure the highlight bar is V-CHIP PROTECT
Inhaltszusammenfassung zur Seite Nr. 16
OFF MOVIE RATING is not set When you select TV-Y7, TV-PG, TV-14 or TV- MP G ALL ages MA, press either CHANNEL ? or ? buttons to MP PG Parental guidance select the contained rating. MP PG-13 Parental guidance, less than 13 years old MP R Under 17 years old, Parental guidance • V/FV-VIOLENCE suggested MP NC-17 17 years old and above • S – SITUATIONS. MP X Adult only • L – LANGUAGE MP N/R Movie has not been rated or ratings do not • D – DIALOG apply Press VOLUME + or – to
Inhaltszusammenfassung zur Seite Nr. 17
REMOTE INFRARED SENSOR/REPEATER OPERATION The VOH1502 incorporates a Infrared Sensor OVERHEAD DOME LIGHTS which relays the signals from the Remote Control A three-position slide switch controls the Dome to allow the VOH1502 to be controlled simply by Lights on the VOH1502. Sliding the switch to the pointing it’s Remote Control at the remote ON position will turn the Dome Lights ON. The sensor. This provides control of auxiliary OFF position will prevent the Dome Lights from
Inhaltszusammenfassung zur Seite Nr. 18
VIDEO OUTPUT AUX IN-L (WHT) The VOH1502 provides a video output for an AUX IN-R (RED) AUX IN-V (YLW) optional Video monitor(s). This output will provide IR2-IN-R (RED) a video signal that duplicates the signal IR2-IN-L (WHT) displayed by the VOH1502 to an additional Monitor or Video display. Please see your installer for more information. AUXILIARY A/V STEREO INPUTS JACK The VOH1502 is equipped with an auxiliary A/V input connector. The inputs a
Inhaltszusammenfassung zur Seite Nr. 19
OPTIONAL ACCESSORIES WIRED FM MODULATOR (P/N FMM100) WIRELESS HEADPHONES Your video system may be equipped with an optional RF modulator, that allows you to listen to The VOH1502 includes a built in Infrared the VOH1502’s audio signal by tuning your Transmitter for use with Audiovox Wireless vehicle’s radio to the selected frequency, (88.7 or Headphones (P/N MVIRHS). Turning the 89.1- check with your installer) and turning on the Headphone switch ON will activate the internal
Inhaltszusammenfassung zur Seite Nr. 20
1 2 Negative Dome Light Switching 3 Lamp Auto Purple/Brown 4 5 Constant 12V Black/Red 6 10 Lamp On Red/Black 12 7 8 Positive Dome Light Switching 9 14 Lamp Auto Purple/Brown 13 17 Ground Black/Red 16 15 12Vdc Red/Black PIN 1 – Power -Red PIN 2 – Power GND -Black Antenna PIN 3 – Dome Light Auto -Purple/Brown PIN 4 – Lamp Common -Black/Red PIN 5 – Dome Light On -Red/Black PIN 6 – Line Out (L) -White PIN 7 – Spk
