Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH DEUTSCH FRANÇAIS ESPAÑOL Р УССК ИЙ
汉语
PN-S655
LCD MONITOR
LCD FARBMONITOR
MONITEUR LCD
MONITOR LCD
ЖК МОНИТОР
液晶显示器
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
使用说明书
ENGLISH ...... E1
DEUTSCH ..... D1
FRANÇAIS .... F1
ESPAÑOL .... S1
РУССКИЙ .. ... Р1
汉语 ............... C1
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT: To aid reporting in case of loss or theft, please record the Model No.: product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identi
Inhaltszusammenfassung zur Seite Nr. 3
ENGLISH PN-S655 LCD MONITOR ENGLISH IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT WARNING: EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the CAUTION user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may RISK OF ELECTRIC be of sufficient magnitude to constitute a risk of SHOCK electric shock to persons. DO NOT OPEN The exclamati
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
Inhaltszusammenfassung zur Seite Nr. 5
ENGLISH IMPORTANT INFORMATION (Continued) The battery supplied with this product contains traces of Lead. For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the
Inhaltszusammenfassung zur Seite Nr. 6
SAFETY PRECAUTIONS (Continued) 14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on t he product or when objects have fallen into the product. c. When the product has been e xposed to rain or water . d. When the product does not operate properly as described in th e operating instructions. Do not to
Inhaltszusammenfassung zur Seite Nr. 7
ENGLISH TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with The Power Cord the application of high precision technology. However, there - Do not damage the power cord nor place heavy objects on may be minute points on the screen where pixels never light it, stretch it or over bend it. Also, do not add extension cords. or are permanently lit. Also, if the screen is viewed from Damage to the cord may result in fire or electric shock. an acute angle ther
Inhaltszusammenfassung zur Seite Nr. 8
Contents IMPORTANT INFORMATION ............................................1 Connecting the Power Cord .........................................12 DEAR SHARP CUSTOMER ..............................................3 Preparing the Remote Control Unit ..............................12 SAFETY PRECAUTIONS ..................................................3 Installing the batteries ................................................12 TIPS AND SAFETY INSTRUCTIONS ...............................5 Remote co
Inhaltszusammenfassung zur Seite Nr. 9
ENGLISH Supplied Accessories If any component should be missing, please contact your dealer. Liquid Crystal Display: 1 Remote control unit: 1 Power cord: 1 R-6 battery (“AA” size): 2 CD-ROM (Utility Disk for Windows): 1 Operation manual: 1 Stand hole protection cover: 2 * Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal
Inhaltszusammenfassung zur Seite Nr. 10
Part Names nRear view 1. PC/AV output terminal (DVI-D) (See page 11.) 19 20 2. PC1 input terminal (DVI-D) (See page 10.) AV1 input terminal (DVI-D) (See page 10.) 3. PC2 input terminal (HDMI) (See page 10.) AV2 input terminal (HDMI) (See page 10.) 4. PC3 input terminal (Mini D-sub 15 pin) (See page 10.) 18 5. PC4 input terminals (BNC) (See page 10.) 6. AV3 input terminals (BNC) (See page 10.) 7. AV5 input terminal (BNC) (See page 10.) 8. AV4 input terminal (S) (See page 10.)
Inhaltszusammenfassung zur Seite Nr. 11
ENGLISH How to Install the Monitor Mounting precautions • Since the monitor is heavy , consult your dealer before installing, removing or moving the monitor. • When installin g, removing or moving the monitor , ensure that this is carried out by at least 2 people. • When moving the monitor , be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury. • Install the monitor with the surface perpend
Inhaltszusammenfassung zur Seite Nr. 12
Connecting Peripheral Equipment Caution Connection with AV equipment • Be sure to turn of f the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the Cr/Pr Y Cb/Pb equipment to be connected. AV1 input AV2 input AV3 input • Be careful not to mix up the input terminal with the output terminal terminal terminals terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and t
Inhaltszusammenfassung zur Seite Nr. 13
ENGLISH Connecting Peripheral Equipment Other terminals Connecting multiple monitors PC/AV audio output terminals You can connect multiple monitors (up to 5 monitors) in a • Audio from the equipment con nected to the A V audio input daisy chain by using the PC1/AV1 input terminals and PC/AV terminals or PC audio input terminal is output. Connect to output terminals of this monitor. the audio input terminals of the connected equipment using a commercially available audio cable (RCA). Connec
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Main power switch 1 3 For power outlet 2 AC input terminal Power cord (Supplied) Preparing the Remote Control Unit Installing the batteries Remote control operation range 1. Press the cover gently and slide it in the direction of
Inhaltszusammenfassung zur Seite Nr. 15
ENGLISH Removing the Temporary Stand Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.) Caution • The monitor is heavy . Make sure to handle the monitor with at least 2 people. • This monitor is fixed to the temporary stand when shipped from the factory . Please note that this stand is for temporary use
Inhaltszusammenfassung zur Seite Nr. 16
Turning Power On/Off Caution TIPS • T urn on the monitor first before turning on the PC or • If the monitor is in the input sig nal standby mode and you playback device. press the POWER button on the remote control unit, the monitor enters standby mode. • Y ou can turn on/of f the monitor by pressing the power Turning on the main power switch of the monitor. • Setting the SCHEDULE flashe s the power LED alternately in red and orange in standby mode. • When ST ANDBY MODE is set to ST A
Inhaltszusammenfassung zur Seite Nr. 17
ENGLISH Troubleshooting Before calling for repair services, make sure following checks PC4 or AV3 does not appear properly. for possible remedies to the encountered symptoms. • Is the setting of BNC SELECT correct? (See Operation guide.) • I s t h e i n p u t s i g n a l c o m p a t i b l e w i t h t h i s m o n i t o r ? ( S e e p a g e s There is no picture or sound. 10 and 17.) • Is the power cord disconnecte d? (See page 12.) Control buttons do not work. • Is the main
Inhaltszusammenfassung zur Seite Nr. 18
Specifications nProduct Specifications Model PN-S655 LCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors 16.77 M colors (8 bits/color) Pixel pitch 0.744 mm (H) x 0.744 mm (V) Viewing angle 1 76° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 56-1/4 x 31-5/8 (1428 x 804) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Sync signal Horizontal/vertical separate (T
Inhaltszusammenfassung zur Seite Nr. 19
ENGLISH Specifications nDimensional Drawings Note that the values shown are approximate values. 61-7/8 [1572] Unit: inch [mm] 58-7/16 [1485] 3-3/8 [85] 3-3/8 [85] 17-5/16 [440] Opening width (56-3/8 [1432]) Screw holes for mounting brackets (M10 x 4 holes) 15-1/2 [393] 6-1/8 [155] 23-7/16 [595] When mounting the monitor , read the manual of the brackets or stand for their mounting procedure. The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monito
Inhaltszusammenfassung zur Seite Nr. 20
Specifications nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. n n PC1/AV1 input
