Inhaltszusammenfassung zur Seite Nr. 1
PLL1911M
LED LCD Monitor
USER'S GUIDE
www.planar.com
Inhaltszusammenfassung zur Seite Nr. 2
Content Operation Instructions...................................................................................................................................................1 Safety Precautions ...........................................................................................................................................................3 First Setup...............................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Operation Instructions Thank you for purchasing this edge-lit LED LCD monitor, a high-resolution multi-scan color LED LCD monitor.Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B digital LED LCD monitor device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interfere
Inhaltszusammenfassung zur Seite Nr. 4
COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour offrir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle. Ce moniteur génère, utilise et peut radier de l’énergie de fréquence r
Inhaltszusammenfassung zur Seite Nr. 5
Safety Precautions This is manufactured and tested on a ground principle that a user’s safety LED LCD monitor comes first. However, improper use or installation may result danger to the LED LCD monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This LED LCD monitor should be operated only at the correct power sources indicated on the label on the rear end of the LED LCD monitor. If you’re unsure of the po
Inhaltszusammenfassung zur Seite Nr. 6
AVERTISSEMENTS : Ce moniteur doit être utilisé uniquement avec les sources d’alimentation adéquates indiquées sur l’étiquette située au dos du moniteur. Si vous n’êtes pas sûr de l’alimentation dans votre résidence, appelez votre vendeur local ou la compagnie d’électricité. N’essayez pas de réparer vous-même le moniteur car il ne contient pas de pièces réparables par l’utilisateur. Le moniteur doit être réparé uniquement par un technicien qualifié. Ne retirez pas le boîtier du
Inhaltszusammenfassung zur Seite Nr. 7
First Setup Congratulations on your purchase of this high performance LED edge lit, LCD monitor. This LED LCD monitor comes with the following accessories : LED LCD monitor Power Cable User’s Guide Audio Cable VGA Cable DVI Cable Installing the Stand Base 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Turn the screw clockwise to attach the base to the monitor. 4. Check the underside of the stand to ensure tha
Inhaltszusammenfassung zur Seite Nr. 8
Disconnecting the Stand Base 1. Turn the monitor over and set it upside down. 2. Turn the screw counterclockwise to loosen it. 3. Detach the stand from the monitor. 6
Inhaltszusammenfassung zur Seite Nr. 9
Front View of the Product OSD Menu On/Off Volume Adjust/Scroll Down/Adjust Decrease Preset Mode/Scroll Up/ Adjust Increase Confirm Select/ Auto adjust Power ON/OFF LED Indicator 7
Inhaltszusammenfassung zur Seite Nr. 10
Rear View of the Product Power input (AC input) Audio Input DVI input (DVI 24 pin) VGA input (D-Sub 15 pin) 8
Inhaltszusammenfassung zur Seite Nr. 11
Quick Installation 1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the power cord to a properly grounded AC outlet, then to the monitor. 4. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer. Recommended resolution and refresh rate is 1280X1024 @ 60 Hz. Example: P
Inhaltszusammenfassung zur Seite Nr. 12
Basic Operation Before using the LED LCD monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD monitor on/off: Press POWER button on the front of LED LCD monitor. The power LED indicator lights green when the LED LCD monitor is on. Using the OSD Menu You are able to use OSD menus to adjust various settings by using menu button on the front of the LED LCD monitor. Display main menu 1
Inhaltszusammenfassung zur Seite Nr. 13
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. LED LCD monitor The will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically. Repeat this step to unlock. 11
Inhaltszusammenfassung zur Seite Nr. 14
Advanced Operation—OSD Menu LED LCD monitor You can use the OSD menu to adjust various settings for your . Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast. Brightne
Inhaltszusammenfassung zur Seite Nr. 15
between 9300K, 6500K, 5400K,and User Color. 9300K: Adds blue to screen image for cooler white. 6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▼ or ▲ button to adjust selected color. Information: To display the information, regarding the current input signal coming from the graphic card in
Inhaltszusammenfassung zur Seite Nr. 16
H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time. OSD Background: Allows the user to turn the OSD background On or Off. Memory Recall: To recall factory settings for Video & Audio controls. Press button 2 to select the Memory Recall menu o
Inhaltszusammenfassung zur Seite Nr. 17
Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1152 x 864 @ 75Hz VESA 1152 x 870 @ 75Hz VESA 1280 x 960@ 60Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz Note: DVI supports 480i, 480p
Inhaltszusammenfassung zur Seite Nr. 18
Technical Information Technical Specification Panel 19” TFT (with LED backlight) Power Management On: 22 Watts (typical), 31 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution SXGA 1280x1024 max. Vertical Frequency 75Hz max. Pixel Dimension 0.294 x 0.294 mm Display Color 16.7M Tilt -5°~ 19° Active Display Area 376.32mm 301.05mm Temperature Operating: 0°C ~ + 40°C Storage: -20°C ~ + 60°C Compliance FCC, CE, UL, WEEE ， Power Input Voltage AC100-24
Inhaltszusammenfassung zur Seite Nr. 19
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD monitor before performing the procedure below. 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Mo
Inhaltszusammenfassung zur Seite Nr. 20
Care and Maintenance Care Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare. Put your LED LCD monitor in a well ventilated area. Do not place any heavy things on top of your LED LCD monitor. Make certain your LED LCD monitor is installed in a clean and moisture-free area. Keep your LED LCD monitor away from magnets, motors, transformers, speakers, and TV sets. Note Move the LED ou
