Bedienungsanleitung Marshall electronic V-RD171P-HDA

Inhaltszusammenfassung zur Seite Nr. 1

Marshall Electronics
8
Standard Accessories
1910 East Maple Ave.
Accessories Supplied with the V-RD171P-HDA:
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
• Users manual
Fax: 310-333-0688
• “Brick” type 12VDC power supply, Part #: V-PS12-5V-1
www.LCDRacks.com
Email: sales@lcdracks.com
V V- -R RD171P-HDA D171P-HDA U Users Guide sers Guide
Product Overview
1
Features
2
Specifications
3
9
Warranty
Operational Setup
4
Marshall Electronics warranties to the first consumer, that th

Inhaltszusammenfassung zur Seite Nr. 2

1 Product Overview WINDOW The V-RD171P-HDA is a rack-mounted monitor in a drawer with a 17”, 5:4 aspect ratio active matrix LCD/TFT Use UP/DOWN/LEFT/RIGHT buttons to select function. module and is designed to collapse into an EIA standard 19” rack and occupies 1RU high (1.75-inch) space when ASPECT RATIO - not in use. The display will produce a high-resolution 1280H x 1024W SXGA image from a computer or display Select Fill All to place image on the entire screen. scaled video images. Compon

Inhaltszusammenfassung zur Seite Nr. 3

4 Operational Setup 1. Unpack the V-RD171P-HDA and accompanying power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental United States call +1 310-333-0606. 2. Install in your desired location. 3. Connect required cables for signal input and output. 4. Attach power connector from power supply to the back of the unit. 5. Plug

Inhaltszusammenfassung zur Seite Nr. 4

7 Menu Functions Note: Menu may be activated if signal on the selected input is detected. Menu functions are different for the selected inputs. MENU select will toggle through 5 menus, FUNCTION, PICTURE, AUDIO (NOT USED), TV-SETUP and WINDOW Function Menu Use UP/DOWN/LEFT/RIGHT buttons to select function. LANGUAGE-English, French, Spanish AUTO ADJUST- Used for PC and DVI signals to auto fi t image to screen. OSD TIME-OUT - Set time in seconds (0 to 60) for OSD to drop from screen after last bu