Inhaltszusammenfassung zur Seite Nr. 1
User’s Guide
M2900S
M3800S
Make sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
Inhaltszusammenfassung zur Seite Nr. 2
Using the Remote Control Name of the Remote Control Buttons SOURCE • Power On/Off Button • Source Button • Auto Button Select input source Automatic adjustment function (RGB, DVI) (Operational for the analog signal only) MENU • buttons OSD Menu Navigation • buttons • Menu Button Select OSD Menu Item. OSD On/ Off : Decrement Value Sub OSD Menu out : Increment Value ZOOM • button Zoom Hot key (Normal Zoom Full) * Only OSD menu off Inserting batteries into remote control. CR2025 1. Slide off the ba
Inhaltszusammenfassung zur Seite Nr. 3
Name and Function of the Parts * The product image in the user’s guide could be different from the actual image. Rear View AC-IN DVI IN RGB IN RS-32C IN REMOTE CONTROL IN DVI, RGB Ports RS-232C Serial Port Wired Remote Control Port Power Connector : Connect the power cord 2
Inhaltszusammenfassung zur Seite Nr. 4
Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable. (RGB) A RGB IN PC Rear side of the product. B When connecting with the DVI signal input cable. DVI IN PC Rear side of the product. Connect the power cord. Rear side of the product. 3
Inhaltszusammenfassung zur Seite Nr. 5
Connecting to External Devices 1 Turn on power by pressing the power button on the product. SOURCE ON/OFF Zoom Power button Turn on the PC. 2 To change input source Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button on the bottom of the product. DVI signal D-Sub signal • How to connect to two computers. Note Connect the signal cables (DVI and D-Sub) to each computer. Press the SOURCE button on the remote control to select t
Inhaltszusammenfassung zur Seite Nr. 6
Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchaed separately and not available from LG. Refer to the instructions included with hte mount for more info. 5
Inhaltszusammenfassung zur Seite Nr. 7
User Menus Screen Adjustment options SOURCE ON/OFF Zoom • Press this button to turn on the power. Press this button again to Power Button turn it off. • This Indicator lights up green when the display operates normally(on Power Indicator mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. • Use this button to show/hide the OSD (On Screen Display) menu MENU Button screen. • Use this button to select an icon or adjust the setting in the OSD screen. OSD Se
Inhaltszusammenfassung zur Seite Nr. 8
User Menus Screen Adjustment options To change input source depending on connected signal. SOURCE Button Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button on the bottom of the product. DVI signal D-Sub signal Digital signal 15-pin D-Sub analog signal IR Receiver • This is where the unit receives signals from the remote control. 7
Inhaltszusammenfassung zur Seite Nr. 9
User Menus OSD Menu Icon Function Description Adjusts screen brightness, contrast and color that you prefer. PICTURE Adjusts the screen size. ZOOM Adjusts the timer options. TIMER Adjusts the OSD image. OSD Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. 8
Inhaltszusammenfassung zur Seite Nr. 10
User Menus How to adjust the OSD (On Screen Display) screen MENU MENU MENU Pops up Move where Select a Move where Select a Save Exit from the Adjust the status the menu you want to menu icon you want to menu icon adjustment menu screen. screen adjust adjust • Use the remote control to adjust the OSD screen. 1 Press the MENU Button, then the main menu of the OSD appears. To access a control, use the Buttons. 2 3 When the icon you want becomes highlighted, press the Button. Use the
Inhaltszusammenfassung zur Seite Nr. 11
User Menus Adjusting Screen Color PICTURE Contrast Brightness Color Temp. Cool H- Position V-Position Clock Phase Auto Adjust MENU Move Select Exit Contrast Adjust the difference between the light and dark levels in the picture. Brightness To adjust the brightness of the screen. Color Temp Color Settings PICTURE Contrast Brightness Color Temp. Cool H- Position V-Position Clock Phase Auto Adjust MENU Move Select Exit • Cool : Slightly
Inhaltszusammenfassung zur Seite Nr. 12
User Menus Adjusting Screen Color PICTURE Cool Color Temp. User - R User - G User - B MENU Move Select Exit Red / Green / Blue Set your own color levels. H-Position : Moving the screen position horizontally. V-Position : Moving the screen position vertically. Clock : To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This function is available for analog signals only. Phase : To adjust the focus of the
Inhaltszusammenfassung zur Seite Nr. 13
User Menus Adjusting Screen size Resolution ZOOM For more improved or better picture quality, select the same Resolution 1366X768 mode corresponding to computer Mode Zoom resolution. Zoom Fine 0 MENU Move Select Exit ZOOM 1. Press the button. Resolution 1366X768 Setup Mode MENU Move Select Exit ZOOM Press the button. 2. Resolution 1366X768 Setup Mode MENU Move Select Exit 3. Accept the changes by pressing the Button. 12
Inhaltszusammenfassung zur Seite Nr. 14
User Menus Adjusting Screen size Mode To select the image size of the screen. The aspect ratio is not adjusted from the original. It is set by the Normal program being watched. When your AV receives the wide screen signal, it will lead you to Full adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. When an image created based on M2900S model resolution (1366 X 480) Zoom and an image based on M3800S model resolution (1366 X 398) are used in dif
Inhaltszusammenfassung zur Seite Nr. 15
User Menus Adjusting the timer function TIMER Clock 02:02 On Time 06:30 Off Time 22:00 Function OFF MENU Move Select Exit Clock If the current time is incorrect, reset the clock manually. 1) Press the MENU button and then use button to select the TIMER menu. 2) Press the button and then use button to select the Clock menu. 3) Press the button and then use button to set the hour(00~23). 4) Press the button and then use button to set the minutes(00~59). 5) Press the MENU
Inhaltszusammenfassung zur Seite Nr. 16
User Menus Adjusting OSD image OSD OSD Set ID 1 3 H-Position 10 V-Position 10 On-Screen Time 63 Halftone Factory Reset MENU Move Select Exit You can assign a unique Set ID NO (name assignment) to each Set ID product when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. H-Position Moving the OSD screen position horizontally. Movi
Inhaltszusammenfassung zur Seite Nr. 17
Troubleshooting No image is displayed Is the product power cord connected? • See if the power cord is properly connected to the outlet. Is the power indicator light on? • See if the power switch is turned on. • May need service. Power is on, power indicator is green • Adjust brightness and contrast again. but the screen appears extremely dark. • Backlight may need repair. the power indicator amber? • If the product is in power saving mode, move the mouse or press any key. • Turn both
Inhaltszusammenfassung zur Seite Nr. 18
Troubleshooting The screen image looks abnormal. Is the screen position wrong? • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. Do thin
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting Screen color is abnormal. Screen has poor color resolution • Set the number of colors to more than 24 bits (true (16 colors). color) Select Control Panel – Display – Settings – Color Table menu in Windows. Screen color is unstable or mono- • Check the connection status of the signal cable. colored. Or, re-insert the PC video card. Do black spots appear on the screen? • Several pixels (red, green, white or black color) may appear on the screen, which can be attributable
Inhaltszusammenfassung zur Seite Nr. 20
Specifications The product specifications can change without prior notice for product improvement. M2900S LCD Panel 29.1 inches (73.95 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 73.95 cm 0.17025 mm X RGB X 0.51075 mm (Pixel Pitch) Power Rated Voltage AC 100-240V~ 50/60Hz 1.1A Power Consumption On Mode : 65W Typ. Sleep Mode : ≤ 2W Off Mode : ≤ 1W Dimensions &Weight H W D Width x Height x Depth 76.58 cm (30.15 inches) x 30.82 cm (12.13 inch
