Inhaltszusammenfassung zur Seite Nr. 1
LaCie 319 LCD Monitor How To Use This Manual
User’s Manual
How To Use This Manual
In the toolbar:
Previous Page / Next Page Go to Contents Page / Go to Precautions Page
Printing:
While optimized for onscreen viewing, the pages of this manual are formatted for printing on 8 1/2” x 11” and A4 sized
paper, giving you the option to print the entire manual or just a specific page or section.
To Exit:
From the Menu bar at the top of your screen, select: File > Quit.
Icons Used In This Manual
Thes
Inhaltszusammenfassung zur Seite Nr. 2
LaCie 319 LCD Monitor Table of Contents User’s Manual page 2 Table of Contents Foreword 3 Precautions 5 Environmental Regulations 8 Specifications 10 1. Package Contents 11 2. Quick Start 12 3. Setting Up Your LaCie 319 LCD Monitor 14 3.1. Controls 16 4. Troubleshooting 21 5. Contacting Customer Support 23 6. Warranty 24
Inhaltszusammenfassung zur Seite Nr. 3
LaCie 319 LCD Monitor Foreword User’s Manual page 3 Copyrights Copyright © 2004/2005 LaCie. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of LaCie. Changes The material in this document is for information only and subject to change without notice. While reasonable efforts have been made in the preparation o
Inhaltszusammenfassung zur Seite Nr. 4
LaCie 319 LCD Monitor Foreword User’s Manual page 4 Canada Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specified cables with the LaCie 319 color monitor so as not to interfere with radio and television reception. (1) The power supply cord you use m
Inhaltszusammenfassung zur Seite Nr. 5
LaCie 319 LCD Monitor Precautions User’s Manual page 5 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LaCie 319 LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near wate
Inhaltszusammenfassung zur Seite Nr. 6
LaCie 319 LCD Monitor Precautions User’s Manual page 6 WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WA
Inhaltszusammenfassung zur Seite Nr. 7
LaCie 319 LCD Monitor Precautions User’s Manual page 7 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70
Inhaltszusammenfassung zur Seite Nr. 8
LaCie 319 LCD Monitor Environmental Regulations User’s Manual page 8 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment andto the further development of environmentally adapted elec- tronics products. Why do we have environmentally labeled computers? In many countries, environmental labeling has become an establishe
Inhaltszusammenfassung zur Seite Nr. 9
LaCie 319 LCD Monitor Environmental Regulations User’s Manual page 9 Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. Requirements permit the inclusion of lead since no replacement has yet been developed. Cadmium** Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses
Inhaltszusammenfassung zur Seite Nr. 10
LaCie 319 LCD Monitor Specifications User’s Manual page 10 Specifications LaCie 319 Technology S-IPS Diagonal 19’’ 48.2cm Resolution 1280x1024 Dot pitch 0.29 Gamut 100% EBU 72% NTSC Gamma Correction 10-bit Luminance 270 cd/m2 Contrast Ratio 600:1 Response Time 18 ms Viewing Angles 178° Connections VGA + DVI-D + DVI-I Power Consumption 48 W In Power Save Mode <2W Weight 9.7 kg Weight without stand 6.3 kg Ergonomy Pivot 90°*, Tilt, Swivel, Height-adjustable, Compatible with VESA 100 support so
Inhaltszusammenfassung zur Seite Nr. 11
LaCie 319 LCD Monitor 1. Package Contents User’s Manual page 11 1. Package Contents Your LaCie 319 LCD monitor should ship with the following: 1 LaCie 319 LCD Monitor with tilt/swivel/pivot/height adjust stand 1 2 Power cords 3 Video signal cable (15-pin mini D-SUB male to DVI-A) 4 Video signal cable (DVI-D to DVI-D cable) 2 Cable cover 5 CD ROM (includes complete User’s Manual in PDF format) 6 3 7 Pivot Software CD 8 blue eye pro calibration Software CD 4 5 6 7 8 Important Info: Please keep yo
Inhaltszusammenfassung zur Seite Nr. 12
LaCie 319 LCD Monitor 2. Quick Start User’s Manual page 12 2. Quick Start To attach the LaCie LCD Monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI-A signal cable to the connector of the display card in your system (Figure A.2). F
Inhaltszusammenfassung zur Seite Nr. 13
LaCie 319 LCD Monitor 2. Quick Start User’s Manual page 13 using the front button. DO NOT switch on/off repeatedly. NOTE: For the MAC with digital output: Before turning on the MAC, the DVI Input mode must be set to DIGITAL in “DVI SELECTION” of OSM by pressing “SELECT” button then “CONTROL” button when the DVI signal cable is connected to the DVI-I connector (Input1) of the monitor. Otherwise the MAC may not turn on. 6. Turn on the computer. No-touch Auto Adjust automatically adjusts the moni
Inhaltszusammenfassung zur Seite Nr. 14
LaCie 319 LCD Monitor 3. Your LaCie 319 LCD Monitor User’s Manual page 14 INPUT1 INPUT2 INPUT1 INPUT2 Figure C.2 Figure C.2 Figure C.1 Vacation Switch Power Button Figure D.1 Figure D.1 Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and gently lift or lower to the desired height (Figure RL.1). Figure RL.1 Screen Rotation Before rotating, the screen must be raised to the
Inhaltszusammenfassung zur Seite Nr. 15
LaCie 319 LCD Monitor 3. Your LaCie 319 LCD Monitor User’s Manual page 15 Tilt Swivel Grasp top and bottom sides of the monitor screen with your Grasp both sides of the monitor screen with your hands hands and adjust the tilt as desired (Figure TS.1). and adjust the swivel as desired (Figure TS.2). Figure TS.1 Figure TS.2 NOTE: Handle with care when tilting the monitor screen. NOTE: If the tilt function is not available, rotate the screen 90° clockwise until you hear one click. Remove Monitor
Inhaltszusammenfassung zur Seite Nr. 16
LaCie 319 LCD Monitor 3.1 Controls User’s Manual page 16 3.1. Controls IMPORTANT: If you perform color-critical work, please bear in mind that manually altering the settings of your display could significantly disturb the accuracy of the colors you display and undermine the benefits of your color-managed environment. LaCie recommends that you not manually modify any Brightness/Contrast controls or the behavior of the Color Control System. OSM (On-Screen Manager) control buttons on the front of
Inhaltszusammenfassung zur Seite Nr. 17
LaCie 319 LCD Monitor 3.1 Controls User’s Manual page 17 AUTO BRIGHTNESS Please keep this function OFF at all times if you are performing color-critical work. 1: Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting the monitor with the best BRIGHTNESS setting*1. 2: Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display area. The environmental brightness sensor has no function. OFF: No function. LaCie re
Inhaltszusammenfassung zur Seite Nr. 18
LaCie 319 LCD Monitor 3.1 Controls User’s Manual page 18 Color Control Systems These options provide manual access to certain settings that influence the colorimetric behavior of your display. If you are per- forming color-critical work, LaCie recommends that you not manually modify the settings of these functions, as your LaCie blue eye pro calibration software takes care of this precisely and automatically in accordance to your desired color settings. Modifying any of these settings manually w
Inhaltszusammenfassung zur Seite Nr. 19
LaCie 319 LCD Monitor 3.1 Controls User’s Manual page 19 VIDEO DETECT: Selects the method of video detection when more than one computer is connected. FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode. When current video input signal is not present, the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, the monitor switches the video source input port to the new found video source automatically. The moni
Inhaltszusammenfassung zur Seite Nr. 20
LaCie 319 LCD Monitor 3.1 Controls User’s Manual page 20 OSM LOCK OUT: This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. There are three types of OSM LOCK OUT: OSM LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSM Lock Out function, press SELECT, then “+” key and hold down simultaneously. To deactivate the OSM Lock Out, press
