Inhaltszusammenfassung zur Seite Nr. 1
SERIES
CLOSE PIC
WIDE TILT
UV10
Instruction Manual
Manual de Instrucciones
Guide d'Instructions
160
WATTS
A / V
INPUT
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS TABLE DES MATIÈRES Thank you for choosing a Jensen Phase Linear product. We hope you will find the instructions Merci d'avoir choisi un produit Jensen. Nous espérons que vous allez trouver les instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, dans ce guide de propriétaire claires et faciles à suivre. Prenez quelques minutes à le you’ll learn how to use all the features of your new Jensen Phase Linear UV10 Mobile consulter, v
Inhaltszusammenfassung zur Seite Nr. 4
ii
Inhaltszusammenfassung zur Seite Nr. 5
UV10 PREPARATION Congratulations on your purchase of the Jensen Phase General Linear UV10 Mobile Multimedia Receiver. • Navigation Ready (NAV102) WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. • Bluetooth Ready (with purchase of BTM10) providing It’s a good idea to read all of the instructions before beginning hands-free profile for safety / convenience and A2DP the installation. We recommend having your Jensen Phase profile for st
Inhaltszusammenfassung zur Seite Nr. 6
UV10 CONTROLS AND INDICATORS 1. CLOSE/OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. PIC/BAND 5 1 2 4 Press to adjust the Brightness and Contrast (see “Image/ Display Settings” on page 5). With the monitor closed, press BAND to change between PIC MULTIMEDIA RECEIVER three FM and two AM bands. 3. DISC SLOT 4. WIDE/ |<< Press to adjust the display aspect of the picture to one of two settings: Full, Normal
Inhaltszusammenfassung zur Seite Nr. 7
UV10 REMOTE CONTROL Table 1: Remote Control Functions 8 3 Button Function 4 35 Name Ref# DVD VCD TUNER CD/MP3/USB iPod iPod 5 9 MUSIC PHOTO VIDEO MENU 1 Enters the main menu Turns on/off PBC when Selects Photo mode 16 13 of the disc playing VCD 23 1 TITLE 2 Enters the title menu of Plays first ten seconds Selects Music mode the disc of each chapter/title 15 2 MUTE 3 Toggles on/off audio Toggles on/off audio Toggles on/off audio Toggles on/off audio Toggles on/off audio 30 14 output output outpu
Inhaltszusammenfassung zur Seite Nr. 8
UV10 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3/USB iPod >>| 19 Selects the next chap- Selects the next chap- Searches an available Selects the next track Selects the next track ter for playback ter for playback radio station by for playback for playback increasing tuning fre- quency 20 Stops playback Stops playback Stops playback / GOTO 21 Open direct entry Open direct entry search screen search screen << 22 Slow playback/slow Slow playback/slow rewind
Inhaltszusammenfassung zur Seite Nr. 9
UV10 USING THE TFT MONITOR when the Parking Brake is engaged. (When the pink wire is Open/Close TFT Monitor Aspect Ratio grounded via the Parking Brake circuit, video will be Open TFT Monitor Press the DISP button (10) on the remote control or WIDE displayed.) button (4) on the monitor to adjust the aspect ratio as follows: Press the OPEN button (1) on the front panel or press the Monitor Movement Mechanism ( ) button (25) on the remote control to activate the FULL mechanism that moves the
Inhaltszusammenfassung zur Seite Nr. 10
UV10 OPERATING INSTRUCTIONS MENU, touch the top left corner of the screen or press the Power On / Off Volume Adjustment SRC button on the front panel (10) or remote control (8) . Volume Increase/Decrease Press the /SRC button (10) on the unit (or the button (4) on the remote control) to turn the unit on. The buttons on the To increase or decrease the volume level, turn the rotary front of the unit light up and the current mode status appears encoder (11) on the front panel or press the VOL-
Inhaltszusammenfassung zur Seite Nr. 11
UV10 c. Press the |<<, >>|, >>, or << buttons (12, 15, 17, SWC Functions 20) on the remote control to adjust the selected The following controls are available for most vehicles: feature to the desired setting. 1. Vol Down 2. Vol Up Table 4: Audio Adjustments 3. Mute 4. Seek Down / Previous Track / ** Preset Down Audio Function Adjustable Range 5. Seek Up / Next Track / ** Preset Up EQ User 6. SRC (Source) Acoustic 7. ** Select 8. ** Select Urban 9. Band Rave ** If additional steering wheel cont
Inhaltszusammenfassung zur Seite Nr. 12
UV10 SETUP MENU To access system settings, press the SETUP button (29) on 4. Use the touchscreen or press the >/|| button (18) on the Setting Options Function remote control to confirm setup. the remote control or touch the button on the screen to Beep On When turned on, an audible General Sub-menu Features enter the “SETUP” menu. The “GENERAL” sub-menu beep tone confirms each func- appears highlighted in yellow. tion selection. Setting Options Function Off No beep sounds. Clock Mode 12Hr
Inhaltszusammenfassung zur Seite Nr. 13
UV10 Audio Sub-menu Features content. By default, the rating system is unlocked. Once Setting Options Function setup, the parental lock is released only by entering the Setting Options Function correct password. Once the password is entered, rating is TFT Auto On The TFT panel automatically Open opens when the unit is turned available for setup. DRC Off Employ the Dynamic Range on. Control for better playback for On Setting Options Function Off You must press the OPEN but- low volumes. to
Inhaltszusammenfassung zur Seite Nr. 14
UV10 Demo Sub-Menu Features You can stop/run demonstration mode or turn Demo Auto Run on/off by chooing the “Demo” option from the SETUP MENU. When Demo "Auto Run" is Off, you can select "Demo > Run" to start Demo Mode. Demo scrolls through the various source screens, simulating activity on the display. “Demo” is discreetly displayed in yellow text (above the clock), to indicate the unit is in Demo Mode. To stop Demo Mode, press the upper-left quadrant of the TFT (Source select). When Dem
Inhaltszusammenfassung zur Seite Nr. 15
UV10 TUNER OPERATION Tuner TFT Display Direct Tuning 17. : Touch to view the SOURCE MENU and select a new playback source To enter a radio station directly, touch the button or press 2 18. MEM: View screen used to enter current channel into 8 17 1 4 5 10 9 19 3 the GOTO button (21) on the remote control to display the preset memory direct entry menu. 19. : Touch to view the SETUP menu FM-1 P1 87.5 MHz 20. PS (Preview Scan): Touch to scan all stations available, ST LOC PTY RDS 01:02 PM RADI
Inhaltszusammenfassung zur Seite Nr. 16
UV10 2. Touch an on-screen preset button (6) to select the corresponding stored station. P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1MHz P5 107.9MHz P6 102.9MHz Auto Store/Preview Scan (AS/PS) Auto Store (AS) To select six strong stations and store them in the current band: 1. Select a band (if needed). 2. Touch the AS button (23) on page 2/2 of the on-screen controls to activate the Auto Store function. The new stations replace stations already stored in that band. Preview Scan (PS) To scan
Inhaltszusammenfassung zur Seite Nr. 17
UV10 DVD/VCD VIDEO OPERATION • VCD (PBC Off): Repeat Single, Repeat Off Controlling Playback NOTE: When properly installed, DVD video cannot be To access the on-screen controls, touch the bottom 1/3 of the displayed on the main TFT screen unless the parking NOTE: For VCD play, the repeat function is not available screen while a DVD is playing. Touch the 1/2 button to view a brake is applied. If you attempt to play a DVD while the if PBC is on. vehicle is moving, the TFT screen displays “PA
Inhaltszusammenfassung zur Seite Nr. 18
UV10 • For DVD mode, you can choose Time or Title/ Touch Screen Direct Entry PBC - Play Back Control (VCD Only) Chapter search. For VCDs with play back functionality, play back control To select a chapter/track directly, touch the button on (PBC) provides additional controls for VCD playback. screen control to display the direct entry menu. DVD Search Search Press the MENU button (1) on the remote control to toggle Title – Go to specific title the PBC function “On”/”Off”. Once PBC is on, pla
Inhaltszusammenfassung zur Seite Nr. 19
UV10 Table 6: Disc Symbols General Disc Information Table 5: Disc Properties Symbol Meaning Max Play Indicates the region code where the disc Symbol 12cm Disc Properties can be played. Time • Region 1: USA, Canada, East Pacific Single side single layer (MPEG 2 Ocean Islands (DVD-5) Method) • Region 2: Japan, Western Europe, Single side double layer 133 minutes Northern Europe, Egypt, South Africa, (DVD-9) 242 minutes Middle East Double side single layer 266 minutes (DVD-10) 484 minutes • Re
Inhaltszusammenfassung zur Seite Nr. 20
UV10 DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for Fast Forward 14. : Touch to access the direct entry screen DVD and CD operation. Please see the DVD/Disc Video Touch the >> button on screen or press the >> button (14) on 15. : Touch to view the SETUP menu Operation section for information about these topics. the remote control to fast forward. Keep pressing and 16. Touch for quick access to Equalizer level settings The UV10 will play music or other au
