Inhaltszusammenfassung zur Seite Nr. 1
VBP4000 VBP4000
VBP4000 VBP4000 VBP4000
VIDEO IN A BAG SYSTEM WITH
DETACHABLE 5.6" LCD MONITOR & DVD PLAYER
Inhaltszusammenfassung zur Seite Nr. 2
A. Introduction Thank you for selecting this “Video in a Bag” System. The system's main features include a 5.6" Liquid Crystal Display (LCD) Moni- tor and a DVD Player. The system utilizes the latest state of the art electronics and is designed for use in vehicles, hotels, offices or your home. The “Video in a Bag” System is constructed to pro- vide years of reliable, trouble-free service. The system is com- pact so that you can take it with you anywhere and is designed for quick and easy ins
Inhaltszusammenfassung zur Seite Nr. 3
from falling. The “S” hooks and all straps must be fastened cor- rectly to secure the system in the vehicle in the event of an acci- dent. Operate the “Video in a Bag” System with the Bag open to ensure proper ventilation of the monitor and the DVD Player. The system is intended to be mounted for rear seat viewing only. Do not use the system in the front seat while operating your vehicle. 3. Power This system MUST be powered from the type of switched (Ac- cessory) power indicated on the marking
Inhaltszusammenfassung zur Seite Nr. 4
7. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick pa- per, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Do not touch the surface of disc. Handle the disc by its edge. Clean the disc by wiping the disc from the center out with a cleaning cloth. Remove the disc from the unit and store it in its case after playing. Some playback operations of discs may b
Inhaltszusammenfassung zur Seite Nr. 5
Unzip the lower compartment of the bag and take out the AC to DC adapter. Plug one end of the AC to DC adapter into the DC 12V jack on the left side of the main unit, then plug other end into the 110V AC power receptacle. 2. Powering the system in the vehicle (Refer to Figure 2) Figure 2 Unzip the lower compartment of the bag and take the cigarette lighter adapter. Plug one end into the DC 12V jack on the left side of the main unit, then plug other end into the cigarette lighter socket. 3. Powe
Inhaltszusammenfassung zur Seite Nr. 6
The monitor can be detached from the system by depressing the button below the screen with one hand and removing the monitor with the other hand. Take the AC to DC adapter from the lower compartment, plug one end into the DC 12V jack on the right side of the monitor, then plug the other end into the 110V AC power receptacle. 4.Powering the detached monitor in the vehicle (Refer to Figure 4) Figure 4 Take the cigarette lighter adapter from the lower compartment, plug one end into the DC 12V jack
Inhaltszusammenfassung zur Seite Nr. 7
plied through the DIN cable to the connected monitor. So there is no need for another power source to be connected to the DC 12V jack on the right side of the detached monitor. Figure 5 Figure 6 77777
Inhaltszusammenfassung zur Seite Nr. 8
E. Installation 1. Installing the system onto the seat back in a car (Refer to Figure 7) Figure 7 1). Unfasten the rear Velcro straps of the bag. Fold inwards the rear piece of the bag and attach its end velcro strap to the middle Velcro strap on the back of the bag to form a triangle. 2). Hang the bag onto the seat back by looping the shoulder strap of the bag around the headrest of the seat. 3). Take one of the supplied straps from the lower compartment of the bag, and connect the latch to the
Inhaltszusammenfassung zur Seite Nr. 9
2. Installing the system between the driver/passenger seat (Refer to Figure 8) Figure 8 1).Take one of the supplied straps from the lower compartment of the bag, and connect the latch to the upper metal ring on the left side of the bag. Attach the "S" hook to the same ring after looping the strap around the headrest of the driver's seat. Re- peat this process for the right side (Passenger Seat). 2).Take another strap and connect the latch to lower metal ring on the left side of the bag. Attach
Inhaltszusammenfassung zur Seite Nr. 10
3. Installing the system on the back seat in a car (Refer to Figure 9) There is no need to remove the four straps from the bag as they are not used in this installation. Figure 9 Carefully place the system (front facing up) on the back seat. Guide the vehicles safety belt through the short strap sewn on the back of the bag. Then secure and adjust the safety belt so that the sys- tem is not free to move around. Finally uncover the bag, swing the monitor upward and adjust the screen for a desire
Inhaltszusammenfassung zur Seite Nr. 11
1). Follow the installation instruction shown in Item 1, 2 or 3. 2). Detach the monitor from the main unit by depressing the but ton below the screen with one hand and remove the monitor with the other hand. Take the pouch from the rear compartment of the bag. Slide the monitor into the pouch, and make sure to feed the bottom piece of the pouch into the long slot at the bottom of the monitor and attach the Velcro strap to fasten the monitor in the pouch. Then loop the strap of the pouch around t
Inhaltszusammenfassung zur Seite Nr. 12
2). You can detach the monitor from the main unit by depress ing the button below the screen with one hand and removing the monitor with the other hand. Rotate the base of the monitor backward so that it may be placed on a table or other level surface. Adjust the screen for the proper viewing angle. This can be done with or without the monitor inside its pouch. Insert one end of the DIN cable into the PORT on the right side of the detached monitor, and the other end into either MONITOR 1 or MON
Inhaltszusammenfassung zur Seite Nr. 13
1). Brightness Up/Down Thumbwheel 2). Volume Up/Down Thumbwheel 3). Headphone Input Jack # 2 4). Headphone Input Jack # 1 5). S Video Output Jack 6). DVD Video Output Jack 7). DVD Audio L Output Jack 8). DVD Audio R Output Jack 9). Monitor Port # 1 (Output) 10). Monitor Port # 2 (Output) 11). DC 12V Input Jack for Main Unit 12). Video Input Jack for Main Unit 13). Audio L Input Jack for Main Unit 14). Audio R Input Jack for Main Unit 15). Power LED Indicator for Monitor 16). Power
Inhaltszusammenfassung zur Seite Nr. 14
2. Remote Control View (Refer to Figure 13) 1). Power Button EJECT 2).Display Button 3). Angle Button 4). Subtitle Button 5). Audio Button 6) Zoom Button 7). Up/Down/Left/Right/Enter Buttons 8). Menu Button 9). Return Button 10). A-B Button 11). Slow Button 12). Pause Button 13) Stop Button 14. Eject Button 15). Number Buttons 16). Setup Button 17). Repeat Button 18). Previous Button 19). Next Button 20). Reverse Button 21). Forward Button 22). Play Button
Inhaltszusammenfassung zur Seite Nr. 15
1. Basic Operation POWER Turn on/off the unit OPEN/CLOSE Eject/load the disc PLAY Start Play SLOW Play at 1/2, 1/4, or 1/8 times speed PAUSE Still Picture STOP (1 time) Stop at the present playing point / (2 times) Stop playing NEXT Go to the next chapter, track or scene during play back PREVIOUS Go back to the preceding chapter, track or scene during play back FORWARD Scan forward at 2, 4, 6, or 8 times speed REVERSE Scan backward at 2, 4, 6, or 8 times speed UP/DOWN/LEFT
Inhaltszusammenfassung zur Seite Nr. 16
2. Menu A DVD is divided into sections called title and chapter. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playing to display the menu, and press ENTER or PLAY to start playing. Some DVDs allow you to select disc play back options using the DVD menu. 3. Display (The contents vary from disc to disc.) 1). Playing time and remaining time a. During play back press DISPLAY to displa
Inhaltszusammenfassung zur Seite Nr. 17
(Menu 2) c. Press DISPLAY the 3rd time to display the elapsed time for the chapter. The heading will disappear automatically in about 3 seconds. (Menu 3) Press DISPLAY the 4th time to display the remaining time for the chapter. The heading will disappear automatically in about 3 seconds. (Menu 4) Press DISPLAY the 5th time to exit. 17 17 17 17 17
Inhaltszusammenfassung zur Seite Nr. 18
2). Angle During play back press ANGLE to view angles for discs con- taining multi-angles, with the current angle number (1) and the total number of angles (2) displaying. Go on to press ANGLE to select other angle, and finally exit to return to normal viewing angle. The angle display will disappear automatically if the ANGLE button isn’t pressed again in about 3 seconds. (Menu 5) 3). Subtitle During playing press SUBTITLE to select the subtitle language you desire, with the current subtitle la
Inhaltszusammenfassung zur Seite Nr. 19
4). Audio During play back press AUDIO to select the audio language you desire, with the current audio channel number (1) and the total number of audio channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the AUDIO button isn’t pressed again for 3 seconds. (Menu 7) 5). Zoom During play back press ZOOM to enlarge the picture by 1.5, 2, or 4X with the current zoom multiple (1) displaying. Press Up/ Down/Left/Right to move
Inhaltszusammenfassung zur Seite Nr. 20
6). A-B Repeat a. During play back press A-B to set the starting point A. (Menu 9) b. Press A-B to set the ending point B and the player will re- peatedly play the part between Point A and Point B. (Menu 10) c. Press A-B a 3rd time to cancel A-B repeat. Normal play back will resume from Point A. (Menu 11) 20 20 20 20 20
