Inhaltszusammenfassung zur Seite Nr. 1
ADV10
10.2” OVERHEAD LCD
MONITOR WITH
DVD PLAYER
OPERATION
MANUAL
R
128-8567
Inhaltszusammenfassung zur Seite Nr. 2
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehi
Inhaltszusammenfassung zur Seite Nr. 3
FEATURES Congratulations Congratulations on your purchase of the ADVENT ADV10 • 10.2” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor DVD Player with drop-down video / monitor. The ADV10 has been designed to give you and your family many years of • Built-in DVD Player video entertainment in the mobile environment. Please read • OSD (On Screen Display) for Control of Picture Quality the directions that follow to familiarize yourself with the and Functions prod
Inhaltszusammenfassung zur Seite Nr. 4
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1 4. STOP (n) Control - Press STOP once : Stops playback, Pressing the PLAY button again will resume normal playback from where movie was stopped. 2 - Press STOP twice and then press PLAY to start playback 3 4 from the beginning of the DVD. 5 6 5. EJECT () Control 7 This control is used for ejecting disc from the disc compartment. 8 6. Three Position Dome Light Switch ON - Turns on the dome lights. 9 OFF - The dome lights will not turn on in
Inhaltszusammenfassung zur Seite Nr. 5
CONTROL FUNCTION DESCRIPTION () SIDE VIEW 1 1. DVD Disc insertion Slot For loading and removing discs. CONTROL FUNCTION DESCRIPTION () BACK VIEW 1 2 3 1. Auxiliary Video Input 2. Auxiliary Audio Left Input 3. Auxiliary Audio Right Input 5
Inhaltszusammenfassung zur Seite Nr. 6
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION POWER EJECT 1 M1 M2 30 2 SOURCE MUTE 3 TV DVD 29 4 28 DVD SOURCE VOLUME 5 PIX 27 6 CR2025 SYSTEM MENU DISC MENU ZOOM 7 26 8 25 REPEAT ENTER 24 9 DISPLAY SETUP SUBTITLE Initial Use 23 10 When purchased the remote control has a battery installed with a 22 AUDIO Pull Tab to prevent battery discharge. Remove the Pull Tab before 21 11 12 20 attempting to use the remote. 13 19 14 18 Battery Replacement 1 2 3 4 15 1. Remove the battery holder. 5 6 7 8
Inhaltszusammenfassung zur Seite Nr. 7
* Function control is available on the unit and the Remote Control. ** Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT M1 Button – Set the remote control code to allow control of the unit in M1 mode. M2 Button** – Set the remote control code to allow control of the unit in M2 mode. 3. SOURCE* Each time the button is pressed, the unit will cycle through modes DVD, AV1/AUX 4. TV Mode Select Switches certain function k
Inhaltszusammenfassung zur Seite Nr. 8
9. ENTER Used to implement a selected setting or menu option. 10. DISPLAY Press to display the current disc information while the disc is playing. Press the cursor (pq) buttons to select the Title or Chapter. For Title/Chapter selection use the numeric buttons to enter the desired Title /Chapter selection. 11. SCAN BACKWARD (7) Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed. 12. PLAY* Press to activate the play mode
Inhaltszusammenfassung zur Seite Nr. 9
19. STOP (<)* Press to stop playback.(Playback will resume from the point it is stopped). Press twice at once to stop playback fully. (Playback will resume from the beginning of the disc). 20. SCAN FORWARD (8) Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed. 21. AUDIO Press to display and select audio language in DVD mode. Each time you press the button, the language changes. Note: The available languages vary from di
Inhaltszusammenfassung zur Seite Nr. 10
26. ZOOM Press this button to enlarge the picture when playing a DVD disc. Press ZOOM button DVD player perform Once Q1- Enlarge the picture 2 times of the original size Second Q2- Enlarge the picture 3 times of the original size Third Q3- Enlarge the picture 4 times of the original size Forth Q off- Picture is returned to original size 27. VOLUME DOWN (-) or UP (+) Press to decrease or increase the level of the picture adjustments after the picture select button (PIX) is pressed. 28
Inhaltszusammenfassung zur Seite Nr. 11
SYSTEM MENU ADJUSTMENTS The System Menu Contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) Press the TV button and then the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. 2) Use the cursor buttons p or q to select the desired item in the main page and press the ENTER button to select. 3) The submenu will appear on screen. 4) Use the cursor buttons p or q to select an
Inhaltszusammenfassung zur Seite Nr. 12
FMM SELECT FMM ON/OFF options - Turns the wireless FM Modulator on or off. FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.1MHz) SYSTEM MENU FMM PICTURE CONTROL FMM ON FMM FMM OFF OSD LANGUAGE FMM SELECT SOURCE DEFAULT DVD SCREEN MODE OSD LANGUAGE This f
Inhaltszusammenfassung zur Seite Nr. 13
SOURCE DEFAULT DVD This allows the user to set the system default source to DVD. Note: • If source default is set to ON, every time the unit is turned off then on, the unit will power up and automatically switch the source to DVD. If source default is set to OFF and the unit is turned off then on, the unit will power up in whatever source was last selected. • Unit is set to source default DVD on as the default mode of operation. • Selection of Source default can only be made from within t
Inhaltszusammenfassung zur Seite Nr. 14
DVD SETTINGS AND ADJUSTMENTS The DVD Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or prevent children from viewing DVD playback of adult DVD Titles. Using the Setup Menu 1. Press the DVD button and then the SETUP button on the remote. The Setup Menu appears on the Language OSD Language : English screen as shown per diagram. Subtitle : Off Video 2. Use the p or q cursor buttons to highlight the se
Inhaltszusammenfassung zur Seite Nr. 15
DVD SUBTITLE SETUP Language OSD Language English French Subtitle Video Spanish Select "SUBTITLE" using pqbutton, then press ubutton to enter the submenu. Select the subtitle you German Rating Audio Italian desire using pqbutton, then press “ENTER” to confirm the setting. Press tbutton to return. Chinese Misc Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, Japanese Thai language is not available, the player will play and
Inhaltszusammenfassung zur Seite Nr. 16
DVD RATING SETUP Language Parental : 6.Adult Parental Video Change Password This item allows you to limit the content of movie playback from G to Adult. The lower the value, the Rating more strict the control. Misc 1. G 2. PG 3. PG – 13 4. R 5. NC – 17 6. Adult The rating level can only be changed when the correct password is provided. For first time use to change parental control, using cursor u button to enter parental mode, key in the default password (3308) and press ENTER. Press ENTER but
Inhaltszusammenfassung zur Seite Nr. 17
Load Factory Load Factory Language Load Factory This option allows you to reset all options to factory settings. Screen Saver Video Yes No * This function will not affect the Rating control settings. Rating Misc Screen Saver This option allows you to set the Screen saver mode. Load Factory Language ON -Screen saver will appear Screen Saver Off Video OFF -Screen saver will not appear On Rating Note: The DVD player will enter Screen Saver mode if the unit is inactive for approximately 2 minutes. M
Inhaltszusammenfassung zur Seite Nr. 18
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed. Selecting Folders and Songs When a device containing MP3 files
Inhaltszusammenfassung zur Seite Nr. 19
Repeat: play repetitively 00:00:01 Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press ENTER, 1/12 / Flat Mode Each time ENTER is pressed the unit will cycle through the available options. Off/Single/Folder/All are 001 Repeat : Off 002 displayed in that order. Repeat default is Off; Mode : Normal 003 004 005 Music Playing Off Turn off repeat function 006 Single Repeat the song being played until STOP is pressed. Folder Pl
Inhaltszusammenfassung zur Seite Nr. 20
00:00:01 Clear program 1/12 / 001 Method: To clear the selected song files, press the STOP button twice during playback mode. Move the Edit mode Broser view 002 cursor to the Edit mode function and press ENTER. After Edit mode is selected, move cursor to selected Clear program 003 004 songs list and select the songs which you want to delete. Press ENTER and a check mark will appear to 005 Music Playing the left of the selected song. Move the cursor to clear program and press ENTER, the selected
