Inhaltszusammenfassung zur Seite Nr. 1
LDVD 84
OWNER's MANUAL
Mobile Video System
DVD/VCD/CD/MP3 PLAYER WITH
MANUALLY TUNED SYNTHESIZER STEREO RADIO
Inhaltszusammenfassung zur Seite Nr. 2
2
Inhaltszusammenfassung zur Seite Nr. 3
CAUTION: Region Management Information THIS DVD PLAYER ISA CLASSI Region Management Information: LASER PRODUCT. HOWEVER THIS This DVD Player is designed and DVD PLAYER USESA manufactured to respond to the Region VISIBLE/INVISIBLE LASER BEAM Management Information that is recorded on a DVD disc. If the Region number WHICH COULD CAUSE HAZARDOUS described on the DVD disc does not RADIATION EXPOSURE IF DIRECTED. correspond to the Region number of this BE SURE TO OPERATE THE DVD Player, this DVD Play
Inhaltszusammenfassung zur Seite Nr. 4
Disc formats supported by this player Note these scratches are not an indication of any problem with the player. DVD VI DEO 12 cm disc (Single-sided disc only) Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player DVD-ROM DVD-R/DVD-RAM CDV CD-G Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Preparing New Discs with Rough Spots Do not place stickers or make A new disc may have rough edges on its scratches on discs. in
Inhaltszusammenfassung zur Seite Nr. 5
Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
Inhaltszusammenfassung zur Seite Nr. 6
DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER CONSOLE PLAIN WASHER PLAIN WASHER TAPPING SCREW SLIDE BRACKET HOUSING HEX BOLT 6
Inhaltszusammenfassung zur Seite Nr. 7
HOW TO REMOVE AND INSTALL THE FRONT PANEL 1.Press the release button and pull-off the front panel. Keep front panel into the case. 2.To install the front panel, insert the panel into the housing and make sure the panel is properly installed, otherwise, abnormalities occurs on the display or some keys will not function properly. REMOVING THE FRONT PANEL FRONT PANEL RELEASE BUTTON INSTALLING THE FRONT PANEL 7
Inhaltszusammenfassung zur Seite Nr. 8
WIRING CONNECTION FOR 4x7W SYSTEM MAIN UNIT AUX(optional) VIDEO IN YELLOW ANTENNA CONNECTOR RCH IN RED LCH IN WHITE RCA CABLE GREY SUB WOOFER RED IGNITION 0.5A VIDEO OUT 2 YELLOW SWITCH (B+) COAXIAL OUT BROWN REAR RCA OUTPUT CABLE (OPTIONAL) RCH RED FUSE BOX MEMORY(B+) YELLOW LCH WHITE BACK-UP FRONT RCA OUTPUT CABLE FRONT RCA R RED VIDEO OUT1 YELLOW 5A BLACK GROUND (B-) FRONT RCAL WHITE POWER BLUE (FOR RCA LINE OUT VERSION ONLY) ANTENNA WHITE GREY FRONT FRONT Lch SPK. Rch SPK WHITE/BLACK GREY/BL
Inhaltszusammenfassung zur Seite Nr. 9
1 11 12 GOTO MENU DISPLAY 2 13 EJECT STOP PLAY/PAUSE MUTE 14 3 SUBTITLE AUDIO ANGLE SLOW 4 15 ZOOM TITLE REPEAT A-B 5 16 PBC 6 17 18 7 19 8 F.FWD NEXT ENTER 20 F.BWD PREV. 9 1 2 3 4 21 5 6 7 8 SETUP +10 9 0 10 22 Disc search button, cooperatively used with numeric buttons 1. GOTO Display statistical disc information during playback 2. DISPLAY Press it to eject the disc.(EJECT is enabled in DISC MODE only) 3. EJECT 4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language DVD disc
Inhaltszusammenfassung zur Seite Nr. 10
Preparing the Remote Control Inserting the Batteries 1.Open the battery compartment cover. 2.Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented indicated. 3.Close the cover Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the IR mark. 10
Inhaltszusammenfassung zur Seite Nr. 11
18 17 16 15 2 3 4 5 6 7 8 9 10 11 12 13 14 1 19 20 ON/OFF Press POWER button (13) to turn on the unit. Press it again to turn off. FACEPLATE RELEASE Press REL button (2) to detach the removable faceplate. SET THE CLOCK Press CLK button (6) to change the display to clock display. Press it again to return to previous display. In clock display, press and hold theCLK button (6) for several seconds until the clock display flashes. Press VOL- (9) to change minutes or VOL+ (10) to change hours. SELECT
Inhaltszusammenfassung zur Seite Nr. 12
Volume Adjust volume level by using VOL+ (10) and VOL- (9) buttons. Note: The unit is initially set to volume mode. Bass Press SEL button (8) one time. Adjust bass level by using VOL+(10) and VOL-(9) buttons. Treble Press SEL button (8) two times. Adjust treble level by using VOL+(10) and VOL -(9) buttons. Balance Press SEL button (8) three times. Adjust sound balance between left and right speakers by using VOL+(10) and VOL-(9) buttons. Fader Press SEL button (8) four times. Adjust sound balanc
Inhaltszusammenfassung zur Seite Nr. 13
FLASHING LED If the front panel is not on the main unit, LED (19) will be flashing. RESET BUTTON FUNCTION RESET button (20) is placed on the housing and must be activated with eithera ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: -Initial installation of the unit when all wiring is completed. -All the function buttons do not operate. -Error symbol on the display. Note: If press RESET button , the unit can't work yet, please usea cotton swab so
Inhaltszusammenfassung zur Seite Nr. 14
BASIC OPERATION -> FM -> MW -> (for2 bands Europe) or -> FM -> AM -> (for2 bands USA) or Refer to the explanation of diode matrix. 2). CDP mode changed the mode to Radio mode. When pressed long, it is engaging whether TA mode on or off. When TA mode is on and a traffic announcement is transmitted: TA(INFO)- When the unit was in CDP mode, it will switch temporarily to radio mode. - If the volume level was under the threshold point it will be raised to the threshold point. But the user changed the
Inhaltszusammenfassung zur Seite Nr. 15
Pause (still picture) On-Screen Display Function Pressing during playback will stop Press the DISPLAY button during play temporary. Return to normal playback to display the contents of the playback, press once again. current disc on the screen. Example: Repeat DVD: Press the REPEAT button to select repeat (1) Press DISPLAY for the first time: mode as follow. DVD: TITLE 01/03 CHAPTER 002/025 P: 00:00:25 Press the REPEAT button to select repeat mode as follow. TITLE ELAPSED CHAPTER REPEAT ON TITLE
Inhaltszusammenfassung zur Seite Nr. 16
(2) Press DISPLAY for the second time: VCD: Press AUDIO during playback. T:01/18 P: 00:00:25 LR DISC It is possible to switch the sound SINGLE REMAIN between monaural and stereo sound. LEFT VOCAL RIGHT VOCAL MONO LEFT (3) Press DISPLAY for the third time: STEREO MONO RIGHT T:01/18 P: 00:00:25 LR DISC CD: TOTAL ELAPSED Press AUDIO during playback. It is possible to switch the sound (4) Press DISPLAY for the fourth time: between monaural and stereo sound. MONO LEFT MONO RIGHT STEREO T:01/18 P: 00:
Inhaltszusammenfassung zur Seite Nr. 17
Multi-angle Function MP3 Disc Play MP3 disc is playing as the format of (For DVD only) FOLDER by. FOLDER Press ANGLE during playback. Each time the button is pressed, number For example: of the angle changes in sequential order. Mp3 PLAYER Notes: -The angle number is different according ROOT ROOT0 to the disc. -The function only work for discs having MP3 MUSIC1 scenes recorded at different angles. SKY -When no different angle are recorded, will be displayed at screen left top MP3 HEAR YOUR corne
Inhaltszusammenfassung zur Seite Nr. 18
INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE--- --- GENERAL PAGE --- GENERAL SETUP TV DISPLAY NORMAL/PS SPEAKER SEUP NORMAL/LB PIC MODE AUDIO SETUP ANGLE MARK WIDE PREFERENCES OSD LANG CAPTIONS EXIT SETUP SCR SAVER 1.Press SETUP in the stop mode. MAIN PAGE (Press the stop button twice to ensure the player under STOP mode.) TV Screen 2.The initial SETUP menu is displayed. Video Wide(16:9) Material Normal Pan Scan Letter-box 4:3 3.Select the preferred item by using the / buttons. 4.Press E
Inhaltszusammenfassung zur Seite Nr. 19
--- GENERAL PAGE --- --- GENERAL PAGE --- TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK N-FLICKER OSD LANG OSD LANG ENGLISH CAPTIONS CAPTIONS SCR SAVER SCR SAVER MAIN PAGE MAIN PAGE PIC mode setup OSD LANG type setup Select AUTO, the player PIC mode will Select the preferred OSD language by depend on DVD disc. using the/ buttons. Select HI-RES format for best image resolution. Select N-FLICKER format on format on --- GENERAL PAGE image or picture under noise affect. T
Inhaltszusammenfassung zur Seite Nr. 20
AUDIO SETUP --- AUDIO SETUP --- --- GENERAL PAGE --- AUDIO OUT ANALOG TV DISPLAY OP MODE SPDIF/RAW PIC MODE SPDIF/PCM LPCM OUTPUT ANGLE MARK DYNAMIC OSD LANG CAPTIONS SCR SAVER ON OFF MAIN PAGE MAIN PAGE AUDIO OUT SCR SAVER setup This is to activate the audio output from Select the SCR SAVER output ON/OFF. ANALOG mode to SPDIF/RAW mode to SPEAKER SETUP SPDIF/PCM mode. --- SPEAKER SETUP PAGE --- --- AUDIO SETUP --- DOWNMIX LT/RT AUDIO OUT STEREO OP MODE LINE MODE MAIN PAGE LPCM OUTPUT RF REMOD DY
