Bedienungsanleitung Kenwood XXV-01D

Inhaltszusammenfassung zur Seite Nr. 1

CD-RECEIVER
XXV-01D
INSTRUCTION MANUAL
© B64-3061-00/00 (MW)

Inhaltszusammenfassung zur Seite Nr. 2

Contents Safety precautions 4 Tuner/TV control features 27 Tuning Notes 5 Tuning Mode Direct Access Tuning About CDs 6 Station Preset Memory Auto Memory Entry About AAC, MP3 and WMA 7 Preset Tuning Frequency Step Setting Notes on Multi-function System 8 TV Tuning TV channel Preset Memory General features 9 Preset TV Tuning Power Direct TV Tuning Selecting the Source CD/Audio file/External disc control Volume features 30 Attenuator Audio Control Playing CD & Audio file Audio Setup Playing Extern

Inhaltszusammenfassung zur Seite Nr. 3

Menu system 38 Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode DSI (Disabled System Indicator) Selectable Illumination Dimmer Contrast Adjustment Display-reversing Setting Built-in Amp Setting G-Counter Level set G-Analyzer Reset G-Analyzer Calibration setup G-Analyzer Stop Watch Dual Zone System Setting B.M.S. (Bass Management System) B.M.S. Frequency Offset AMP Control CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting & Station/

Inhaltszusammenfassung zur Seite Nr. 4

Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Never watch the G-Analyzer Display s

Inhaltszusammenfassung zur Seite Nr. 5

Notes • If you experience problems during installation, Cleaning the Faceplate Terminals consult your Kenwood dealer. If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when About "Media Manager" of PC application the Reset button is pressed. • "Media Manager" is recorded in the CD-ROM • Press the reset button if the disc auto changer fails attached to

Inhaltszusammenfassung zur Seite Nr. 6

About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or that tape stuck on it. are dirty can’t be used. • Th

Inhaltszusammenfassung zur Seite Nr. 7

About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 128 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property file and folder names may not display correctly. : 30 characters AAC song information: 60 characters • Attach the correct extension for the Audio file (AAC:

Inhaltszusammenfassung zur Seite Nr. 8

Notes on Multi-function System What is the Multi-function System? Real operational example of the Multi- Multi-function System shows the Multi-function function System display, allowing you to select various functions and Example: Turning ON/OFF the Random Play during settings. CD play. Functions available for the current source are 1. Show the Multi-function display of the Random displayed. Play. Press the [NEXT] button. Operational 1 Press the [NEXT] button to Show the Multi- Scan Rando

Inhaltszusammenfassung zur Seite Nr. 9

General features ATT NEXT/MENU ANG VOL AUTO SRC Control knob Release button ATT indicator Power Auxiliary input "AUX" Auxiliary input (Optional accessory) "AUX EXT" Turning ON the Power Standby (Illumination only mode) "STANDBY" Press the [SRC] button. • When the power is ON, the (page Volume 38) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Increasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob clockwise. Decreasing Volum

Inhaltszusammenfassung zur Seite Nr. 10

General features Attenuator Audio Setup Turning the volume down quickly. Setting the Sound system, such as Volume offset and Dual Zone. Press the [ATT] button. Each time you press the button is pressed, the 1 Select the source to adjust Attenuator turns ON and OFF. Press the [SRC] button. When the Attenuator is ON, the "ATT" indicator 2 Enter Audio Setup mode blinks. Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Audio Control Each ti

Inhaltszusammenfassung zur Seite Nr. 11

Subwoofer Output Turning the Subwoofer output ON or OFF. Hold down on [AM] of the Control knob for at least 1 second. Each time you press the button, Subwoofer output switches ON and OFF. When it is ON, "SUBWOOFER ON" is displayed. • You can control this function when "2ZONE" of

Inhaltszusammenfassung zur Seite Nr. 12

General features • X'Over (Crossover Network Setup) Sound Field Control You can manually set a crossover frequency for the speakers. 1 Select the source to adjust • DTA (Digital Time Alignment) Press the [SRC] button. Manually set the sound output timing of each channel. 2 Show the Multi-function display 1 • * Y ou can control this item when Speaker Select Rear Press the [NEXT] button repeatedly until of (page 13) is set to "S.F.C" appears. any item other than "Non

Inhaltszusammenfassung zur Seite Nr. 13

Sound Management system Sound Managemnt Item Range Cabin Setting OFF/ Compact/ Full Size Car/ 1 Select the source to adjust Wagon1/ Wagon2/ Minivan1/ Press the [SRC] button. Minivan2/ SUV/ Minivan (Long) Speaker Select Front 16cm/ 17cm/ 18cm/ 4x6/ 5x7/ 6x8/ 2 Show the Multi-function display 6x9/ 7x10/ O.E.M./ 10cm/ 13cm Press the [NEXT] button repeatedly until Speaker Select Rear 16cm/ 17cm/ 18cm/ 4x6/ 5x7/ 6x8/ "S.M.S" appears. 6x9/ 7x10/ None/ O.E.M./ 10cm/ 13cm Refer to

Inhaltszusammenfassung zur Seite Nr. 14

General features Equalizer Control Sound setting Display User memory "User" 1 Select the source to adjust Natural "Natural" Press the [SRC] button. Rock "Rock" Pops "Pops" 2 Show the Multi-function display Easy "Easy" Press the [NEXT] button repeatedly until "EQ" Top 40 "Top40" appears. Jazz "Jazz" Refer to (page 8). 3 Enter Equalizer Control mode • User memory: Turn the [VOL] knob to select "EQ". The values set on the

Inhaltszusammenfassung zur Seite Nr. 15

• The frequency which can be selected by each • * Y ou can control this item when Speaker Select Rear Frequency band is shown below. of (page 13) is set to any item other than "None". Band Frequency 5 Adjust the WOW control item Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz) Push the Control knob towards [4] or Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k (Hz) [¢]. Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz) Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz) Each time you push the knob, the setting

Inhaltszusammenfassung zur Seite Nr. 16

General features Bypass Control 4 Put in the memory Turn the [VOL] knob to select "Memory1" or Temorarily bypassing DSP (Digital Signal "Memory2". Processor) System. Press the [VOL] knob for at least 2 seconds. The "MEMORY" display blinks 1 time. 1 Select the source to adjust Press the [SRC] button. 5 Exit Memory mode Turn the [VOL] knob to select "Return". 2 Show the Multi-function display Press the [VOL] knob. Press the [NEXT] button repeatedly until "DSP" appears. Refer to

Inhaltszusammenfassung zur Seite Nr. 17

"Recall1": Recall the value put in "Memory1" by 2 Push the faceplate in until it clicks. (page 16). The faceplate is locked in place, allowing you to "Recall2": Recall the value put in "Memory2" by use the unit. (page 16). 7 Exit Memory Recall mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Faceplate Angle Adjustment Removing the Fac

Inhaltszusammenfassung zur Seite Nr. 18

General features 8 Graphic display part Display Type Selection 9 G-Analyzer display part Changing the display mode. 5 Exit display control mode 1 Show the Multi-function display Turn the [VOL] knob to select "Return". Press the [NEXT] button repeatedly until Press the [VOL] knob. "Display" appears. Refer to (page • Change the inf ormation by the Display Type. Refer to 8). the page on the following table for the methods to alternate by the Display Type. 2 Enter

Inhaltszusammenfassung zur Seite Nr. 19

2 Select the wallpaper. 6 Select the graphic/ spectrum analyzer Push the Control knob towards [FM] or display part display [AM]. Push the Control knob towards [4] or Each time you push the knob, the Wallpaper [¢]. changes. Each time you press the button, the graphic display/ spectrum analyzer display alternates 3 Exit Display Control mode between the displays shown in the table below. Turn the [VOL] knob to select "Return". Press the [VOL] knob. Graphic display/ Spectrum Analyzer display M

Inhaltszusammenfassung zur Seite Nr. 20

General features Display Type B Folder name "Folder Name" Text Selection for Display File name "File Name" File number & Play time "P-Time" Selecting the text display. Clock "Clock" Date "Date" 1 Show the Multi-function display Press the [NEXT] button repeatedly until In DAB source "Display" appears. Information Display Refer to (page Service label "Service Label"* 8). Dynamic label "Dynamic Label"*² 2 Enter display control mode PTY label "PTY Label"*² Turn the