Bedienungsanleitung Kenwood KRC-535

Inhaltszusammenfassung zur Seite Nr. 1

KRC-535(K) Cover 01.10.26 5:45 PM Page 1
CASSETTE RECEIVER
KRC-535
INSTRUCTION MANUAL
AMPLI-TUNER-LECTEUR DE CASSETTE
MODE D’EMPLOI
RADIO CASSETTE
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the
best performance from your new cassette-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on
the warranty card, and in the space pro

Inhaltszusammenfassung zur Seite Nr. 2

KRC-535_U.S 01.10.26 5:38 PM Page 2 Contents Safety precautions......................3 DPSS (Direct Program Search System) Basic Operations of remote......22 DPSS with the Remote Loading and Replacing the battery About Cassette tape...................4 Blank Skip Basic operations General features .........................5 Music Repeat In Tuner source Power In Cassette tape source External disc control features..15 Selecting the Source In Disc source Playing External Disc Volume Fast Forwardi

Inhaltszusammenfassung zur Seite Nr. 3

KRC-535_U.S 01.10.26 5:38 PM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer/CD player to To prevent injury or fire, take the To prevent damage to the machine, be connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to "N". locked in place. Otherwise it may fall

Inhaltszusammenfassung zur Seite Nr. 4

KRC-535_U.S 01.10.26 5:38 PM Page 4 Safety precautions About Cassette tape Cleaning the Faceplate Terminals Cleaning the tape head NOTE If the terminals on the unit or faceplate get When there’s noise or the sound quality is bad • If you experience problems during dirty, wipe them with a dry, soft cloth. during tape play the tape head maybe dirty, installation, consult your Kenwood dealer. clean the tape head. • If the unit fails to operate properly, press the Cleaning the Unit Reset button.

Inhaltszusammenfassung zur Seite Nr. 5

KRC-535_U.S 01.10.26 5:38 PM Page 5 General features Power SRC/ Turning ON the Power PWR OFF FM Q/AUD u AM ANG Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. AUTO AME Selecting the Source Press the [SRC] button. Source required Display d DISP/ 4/¢ ATT/ CLK LOUD NAME.S Tuner "TUNER" Tape "TAPE" External disc "DISC" Auxiliary input "AUX" SYSTEM Q indicator ATT indicator Standby (Illumination only mode) "ALL OFF" For Auxiliary input one of the below o

Inhaltszusammenfassung zur Seite Nr. 6

KRC-535_U.S 01.10.26 5:38 PM Page 6 General features Press the [Q] button. Volume Each time the button is pressed the sound setting switches. Increasing Volume Sound setting Display Press the [u] button. Flat "Flat" Decreasing Volume Rock "Rock" Press the [d] button. Top 40 "Top 40" Pops "Pops" Jazz "Jazz" Easy "Easy" Attenuator Scan of Flat — Easy "Scan" Turning the volume down quickly. User memory "User" Press the [ATT] button. • User memory: The values set on the

Inhaltszusammenfassung zur Seite Nr. 7

KRC-535_U.S 01.10.26 5:38 PM Page 7 Treble level "Treble" –8 — +8 Switching Display Balance "Balance" Left 15 — Right 15 Switching the information displayed. Fader "Fader" Rear 15 — Front 15 Press the [DISP] button. Volume offset "V Offset" –8 — ±0 Each time the button is pressed the display switches as shown Volume offset: Each source's volume can be set as a difference below. from the basic volume. In Tuner source 5 Exit Audio Control mode Information Display Press the [AUD] button. Frequen

Inhaltszusammenfassung zur Seite Nr. 8

KRC-535_U.S 01.10.26 5:38 PM Page 8 General features Characters can be entered by using a remote with a number Switching Clock Display buttons. Switching the displayed information. Example: If "DANCE" is entered. Press the [CLK] button. Character Button #Times pressed Each time the button is pressed it switches between clock "D" [#3] 1 display and current source. "A" [#2] 1 During clock display the clock indicator is ON. "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 6 Repeat steps 3 through 5 and enter th

Inhaltszusammenfassung zur Seite Nr. 9

KRC-535_U.S 01.10.26 5:38 PM Page 9 3 Select the Auxiliary input display Press the [4] or [¢] button. Each time the button is pressed it switches through the below displays. • "AUX" • "TV" • "VCP" • When the faceplate is kept remove open, according to the (page 21) setting, the faceplate is hidden and • "PORTABLE" the power turns OFF. • The faceplate is a precision piece of equipment and can be 4 Exit Auxiliary input display setting mode damaged by shocks or j

Inhaltszusammenfassung zur Seite Nr. 10

KRC-535_U.S 01.10.26 5:38 PM Page 10 General features Tuner features Hiding the Control Panel Prevents tampering with the unit while your car is being serviced AM FM SRC etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in (page 21) lapses, AUTO AME the faceplate is hidden and the power turns OFF. Showing the control panel Press the left part at the upper side of the faceplate. The faceplate will o

Inhaltszusammenfassung zur Seite Nr. 11

KRC-535_U.S 01.10.26 5:38 PM Page 11 Tuning Mode Direct Access Tuning (Function of remote) Choose the tuning mode. Entering the frequency and tuning. Press the [AUTO] button. 1 Select the band Each time the button is pressed the Tuning mode switches as Press the [FM] or [AM] button. shown below. 2 Enter Direct Access Tuning mode Tuning mode Display Operation Press the [DIRECT] button on the remote. Auto seek "Auto1" Automatic search for a station. The "– – – –" display. Preset station "Auto2"

Inhaltszusammenfassung zur Seite Nr. 12

KRC-535_U.S 01.10.26 5:38 PM Page 12 Tuner features Cassette player features Auto Memory Entry Putting stations with good reception in the memory AM PROG FM 0 automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry AUTO Press the [AME] button for at least 2 seconds. AME When 6 stations that can be received are put in the memory Auto Memory Entry closes. 4/¢ B NR B.S REP MTL SRC Preset Tuning Tape running display Play side Calling up the s

Inhaltszusammenfassung zur Seite Nr. 13

KRC-535_U.S 01.10.26 5:38 PM Page 13 Press the [AM] button. Playing Cassette Tapes When it's stopped press the [PROG] button. When there's no Cassette Tape inserted 1 Slide open the faceplate Press the [0] button. 2 Insert a Cassette Tape. Dolby B NR When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to safety Press the [B NR] button. and move the shift lever or take an appropriate action, then operate Each time the

Inhaltszusammenfassung zur Seite Nr. 14

KRC-535_U.S 01.10.26 5:38 PM Page 14 Cassette player features • During the songs first 5 seconds there may be a times when the DPSS (Direct Program Search System) previous track is recognized as the current track. Indicating the songs to skip, and Fast Forwarding or Rewinding. • As many as 9 songs can be skipped. Skipping to a later song Press the [¢] button. Each time the button is pressed the number of songs skipped increases. Blank Skip Skipping to a previous song Press the [4] button. Fas

Inhaltszusammenfassung zur Seite Nr. 15

KRC-535_U.S 01.10.26 5:38 PM Page 15 External disc control features Playing External Disc Playing discs set in the optional accessory disc player connected 38 AM FM SRC to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player AUTO "CD" CD player AME "DISC" CD changer / MD changer Pause and play Press the [38] button. 4/¢ SCAN RDM REP M.RDM DISP Each time the button is pressed it pauses and plays. • Disc #10 is displayed as "0

Inhaltszusammenfassung zur Seite Nr. 16

KRC-535_U.S 01.10.26 5:38 PM Page 16 External disc control features 1 Enter the disc number Track Search Press the number buttons on the remote. Selecting the song you want to hear. 2 Do Album Search Press the [4] or [¢] button. Press the [DISC+] or [DISC–] button. Canceling Direct Album Search Press the [38] button. Input "0" to select disc 10. Album Search (Function of disc changer) Selecting the disc you want to hear. Press the [AM] or [FM] button. Track/Album Repeat Replaying the track/di

Inhaltszusammenfassung zur Seite Nr. 17

KRC-535_U.S 01.10.26 5:38 PM Page 17 2 Release it when the song you want to listen to is played Text/Title Scroll Press the [SCAN] button. Scrolling the displayed CD text or MD title. Press the [DISP] button for at least 1 second. Random Play Playing all the songs on the disc in random order. DNPP (Disc Name Preset Play) Press the [RDM] button. (Function of Remote) Each time the button is pressed Random Play turns ON or OFF. Selecting the CD displayed in the DNPS of the CDs set in the When i

Inhaltszusammenfassung zur Seite Nr. 18

KRC-535_U.S 01.10.26 5:38 PM Page 18 Menu system Menu System Setting during operation beep sound etc. functions. 38 AM FM SRC The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. AUTO "MENU" is displayed. AME 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the 4/¢ MENU # 1

Inhaltszusammenfassung zur Seite Nr. 19

KRC-535_U.S 01.10.26 5:38 PM Page 19 removed from the vehicle, personalizing this unit is by using the Press the Reset button and when it's removed from the Security Code is a help in preventing theft. battery power source 1 Turn the power ON. When the Security Code function is activated, the code can't be changed and the function can't be released. 2 Do the step 4 and 5 operation, and enter the Security Code. Note, the Security Code can be set as the 4 digit number of your "APPROVED" is disp

Inhaltszusammenfassung zur Seite Nr. 20

KRC-535_U.S 01.10.26 5:38 PM Page 20 Menu system Manual Clock Adjustment Switching Graphic Display Setting the graphic part display ON/OFF. 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Display Setting Select the "Clock Adjust" display. "Graphic ON" The graphic part is displayed. "Graphic OFF" The graphic part isn't displayed. 2 Enter Clock Adjust mode Press the [4] or [¢] button for at least 1 second. The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button.