Inhaltszusammenfassung zur Seite Nr. 1
CD-RECEIVER
KDC-W6534U
KDC-W5534U
KDC-W534U
INSTRUCTION MANUAL
© B64-3346-00/00 (EW/E2W)
Inhaltszusammenfassung zur Seite Nr. 2
Contents Folder Select 1 mode Safety precautions 3 Folder Select 2 mode Switching the Play mode Notes 4 Letter Seek Text/Title Scroll About CDs 6 Menu system 27 About USB device 7 Menu System Security Code About AAC, MP3 and WMA 8 Touch Sensor Tone General features 10 Manual Clock Adjustment Synchronize Clock Power DSI (Disabled System Indicator) Selecting the Source Selectable Illumination Volume Display Illumination Control Attenuator Dimmer System Q Switching preout Audio Control Built-in Amp
Inhaltszusammenfassung zur Seite Nr. 3
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Mounting and wiring this product req
Inhaltszusammenfassung zur Seite Nr. 4
Notes • No USB device comes with this unit. You need to Cleaning the Unit purchase a commercially available USB device. For If the faceplate of this unit is stained, wipe it with a the types of available USB devices, refer to (page 7). If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then • If you experience problems during installation, wipe it again with a clean soft dry cloth. c
Inhaltszusammenfassung zur Seite Nr. 5
This Product is not installed by the manufacturer About DAB Tuner control of a vehicle on the production line, nor by the Refer to A group on the Instruction manual of DAB professional importer of a vehicle into an EU Tuner KTC-9090DAB (optional accessory) for the Member State. control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Information on Disposal of Old Electrical Instruction manual; therefore, refer to
Inhaltszusammenfassung zur Seite Nr. 6
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be
Inhaltszusammenfassung zur Seite Nr. 7
About USB device Notes on Use of the USB device This unit can play audio files stored in the flash • Install the USB device in the place where it will not memory and digital audio player that have a USB prevent you from driving your vehicle properly. port (these devices are referred to as USB devices in • Do not leave the USB device in the vehicle for a long this document). time. It can deform or damage due to direct sunlight, The following restrictions are placed on the types high tempe
Inhaltszusammenfassung zur Seite Nr. 8
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Playable CD-R/RW format Audio file) and the media format has the following • ISO 9660 Level 1/2 limitation. The Audio file, which is not conforming • Joliet to the specification, may not play normally, or the • Romeo file and folder names may not display correctly. • Long file name. Playable Audio file Playable file format of USB device • AAC, MP3, WMA • For the formats supported by USB devices, refer to http://www.kenw
Inhaltszusammenfassung zur Seite Nr. 9
Playing order of the Audio file • The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files are played in the order the files are written. You can specify the order of playback by numbering files in a folder and writing them by folder. (USB device) Example ^: F Folder older CD (1) ¡: Audio file Audio file ¡! 2 3 ¡" ¡# 4 ¡$ 5 ¡%
Inhaltszusammenfassung zur Seite Nr. 10
General features ATT VOL Control knob Release button Q SRC Clock display LOUD indicator ATT indicator Power 1 • * Function of the KDC-W6534U. Turning ON the Power 2 • * Function of the KDC-W6534U/W5534U. Press the [SRC] button. • This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery. • When the power is ON, the (page The time until full power OFF can be set in
Inhaltszusammenfassung zur Seite Nr. 11
Attenuator Audio Control Turning the volume down quickly. 1 Select the source to adjust Press the [ATT] button. Press the [SRC] button. Each time you press the button, the Attenuator 2 Enter Audio Control mode turns ON and OFF. Press the [VOL] knob. When the Attenuator is ON, the "ATT" indicator blinks. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. System Q 4 Adjust th
Inhaltszusammenfassung zur Seite Nr. 12
General features Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Select the
Inhaltszusammenfassung zur Seite Nr. 13
• Track number at Audio file displays the last 3 digits Switching Display when it exceeds 1000 songs. Changing the information displayed. • When you select the clock display, the display setting of each source will be changed to the clock display. 1 Enter Switching Display mode Press the Control knob for at least 1 second. "DISP SEL" is displayed. 2 Select the Display item Push the Control knob towards [4] or [¢]. In Tuner source Information Display Program Service name or Frequency "FREQ/P
Inhaltszusammenfassung zur Seite Nr. 14
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in "CALL" is displayed. 1 Press the Release button. The audio system pauses. Drop open the faceplate. Listening to the audio during a call 2 Drawing the faceplate to left side pull it to Press the [SRC] button. forward and remove it. The "CALL" display disappe
Inhaltszusammenfassung zur Seite Nr. 15
Tuner features AME Control knob 1-6 SRC Band display Frequency display ST indicator Preset station number Tuning Station Preset Memory Selecting the station. Putting a station in the memory. 1 Select tuner source 1 Select the band Press the [SRC] button. Push the Control knob towards [FM] or [AM]. Select the "TUNER" display. 2 Select the frequency to put in the memory 2 Select the band Push the Control knob towards [4] or Push the Control knob towards [FM] or [AM]. [¢]. Each time you push the k
Inhaltszusammenfassung zur Seite Nr. 16
Tuner features Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. "A-MEMORY" is displayed. When 6 stations that can be received are put in the memory, Auto Memory Entry closes. • When the (page 32) is ON, only RDS stations are put in the memory. • When Auto Memory Entry is done
Inhaltszusammenfassung zur Seite Nr. 17
RDS features TI Control knob 1-6 SRC RDS indicator TI indicator PTY indicator Receiving other traffic information stations Traffic Information Push the Control knob towards [4] or Changing to traffic information automatically [¢]. when a traffic bulletin starts even when you are not listening to the radio. • Traffic information can be switched when it is on the Press the [TI] button. Tuner Source. However, you cannot switch the Traffic Each time you press the button, the Traffic informatio
Inhaltszusammenfassung zur Seite Nr. 18
RDS features PTY (Program Type) Selecting the Program Type and searching for a • Speech and Music include the Program type shown station. below. Music: No.12 — 17, 26 — 30 1 Enter PTY mode Speech: No.3 — 11, 18 — 25, 31 Press the Control knob. • You can put the Program Type in the [1] — [6] button During PTY mode the "PTY" indicator is ON. memory and for quick recall. Refer to the (page 18). • You can change the display language. Refer to • This function cannot be used
Inhaltszusammenfassung zur Seite Nr. 19
Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 18). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. Language Display English "ENGLISH" French "FRENCH" Swedish* "SWEDISH" German "GERMAN" • * KDC-W6534U only 4 Exit Changing Language mode
Inhaltszusammenfassung zur Seite Nr. 20
CD/USB device/Audio file/External disc control features Control knob Release button S.MODE SCAN RDM/3/ REP F.SEL M.RDM SRC A.RDM Track number Play time IN indicator Play mode Disc number When a disc is inserted Playing CD & Audio file Press the [SRC] button. Select the "CD" display. When there is no disc inserted 1 Drop open the faceplate Pause and play Press the Release button. Press the Control knob. Each time you press the knob, the audio pauses 2 Insert a disc. or plays. 3 Push the facepla
