Inhaltszusammenfassung zur Seite Nr. 1
KDC-MP4032
KDC-MP332
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below
Inhaltszusammenfassung zur Seite Nr. 2
Contents Warning 3 Menu system 20 Menu System Safety precautions 4 Activating Security Code Deactivating Security Code Notes 5 Touch Sensor Tone Manual Clock Adjustment About CDs 6 DSI (Disabled System Indicator) Display Illumination Control About AAC, MP3 and WMA 7 Dimmer Built-in Amp Setting General features 8 Supreme Setting Power CRSC (Clean Reception System Circuit) Selecting the Source Receive mode Setting Volume SIRIUS ID (ESN) display Attenuator Auxiliary Input Display Setting System Q T
Inhaltszusammenfassung zur Seite Nr. 3
2Warning 2CAUTION NOTE Use of controls or adjustments or performance of This equipment has been tested and found to procedures other than those specified herein may comply with the limits for a Class B digital device, result in hazardous radiation exposure. pursuant to Part 15 of the FCC Rules. These limits In compliance with Federal Regulations, following are designed to provide reasonable protection are reproductions of labels on, or inside the product against harmful interference in a re
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the unit, the adapter might separate from the CD and following precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) About CD players/disc changers inside the unit. connected to this unit • Mounting and wiring this product requires Kenwood disc changers/ CD playe
Inhaltszusammenfassung zur Seite Nr. 5
Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • When you purchase optional accessories, check (page 24). with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly, press the Reset About SIRIUS Satellite radio t
Inhaltszusammenfassung zur Seite Nr. 6
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u
Inhaltszusammenfassung zur Seite Nr. 7
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not conforming File/Folder name: 64 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property/ AAC song file and folder names may not display correctly. information: 30 characters Playable Audio file • AAC, MP3, WMA • File/Folder name is the number o
Inhaltszusammenfassung zur Seite Nr. 8
General features ATT/DIM VOL Control knob Release button Q SRC Clock display LOUD indicator ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the bu
Inhaltszusammenfassung zur Seite Nr. 9
System Q Audio Control Selecting the best sound setting preset for 1 Select the source to adjust different types of music. Press the [SRC] button. 1 Select the source to set 2 Enter Audio Control mode Press the [SRC] button. Press the [VOL] knob. 2 Select the Sound type 3 Select the Basic Audio item to adjust Press the [Q] button. Press the [VOL] knob. When you press the button once, the current Each time you press the knob, the item to be sound setting is displayed. adjusted alternates betwe
Inhaltszusammenfassung zur Seite Nr. 10
General features Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Select the
Inhaltszusammenfassung zur Seite Nr. 11
Switching Display Band & Channel number "CH NUM" Clock "CLOCK" Changing the information displayed. In Standby/ Auxiliary input source 1 Enter Switching Display mode Press the Control knob for at least 1 second. Information Display "DISP SEL" is displayed. Source name "SRC NAME" Clock "CLOCK" 2 Select the Display item Push the Control knob towards [4] or 3 Exit Switching Display mode [¢]. Press the Control knob. In Tuner source Information Display • * If the contents of the information cannot
Inhaltszusammenfassung zur Seite Nr. 12
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in "CALL" is displayed. 1 Press the Release button. The audio system pauses. Drop open the faceplate. Listening to the audio during a call 2 Drawing the faceplate to left side pull it to Press the [SRC] button. forward and remove it. The "CALL" display disappe
Inhaltszusammenfassung zur Seite Nr. 13
Tuner features AUTO/AME Control knob 1-6 SRC Band display Frequency display ST indicator Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automati
Inhaltszusammenfassung zur Seite Nr. 14
Tuner features Function of the KDC-MP4032 Auto Memory Entry Function of remote control Putting stations with good reception in the Direct Access Tuning memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Open Auto Memory Entry 2 Enter Direct Access Tuning mode Press the [AME] button for at least 2 seconds. Press the [DIRECT] button on the remote "A-MEMORY"
Inhaltszusammenfassung zur Seite Nr. 15
CD/Audio file/External disc control features Control knob Release button SCAN RDM/ REP F.SEL M.RDM SRC 3 Track number Play time IN indicator Disc number When a disc is inserted Playing CD & Audio file Press the [SRC] button. Select the "CD" display. When there is no disc inserted 1 Drop open the faceplate Pause and play Press the Release button. Press the Control knob. Each time you press the knob, the audio pauses 2 Insert a disc. or plays. 3 Push the faceplate on the left side, and return E
Inhaltszusammenfassung zur Seite Nr. 16
CD/Audio file/External disc control features Playing External Disc Track/File Search Playing discs set in the optional accessory disc Searching for a song on the disc or in the Audio player connected to this unit. file folder. Press the [SRC] button. Push the Control knob towards [4] or Select the display for the disc player you want. [¢]. Display examples: Display Disc player "CD CH" CD changer Function of disc changer/ Audio file "MD CH" MD changer Disc Search/Folder Search Pause and play Se
Inhaltszusammenfassung zur Seite Nr. 17
Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Play all the songs on the disc or Audio file folder Audio file folder you are listening to. in random order. Press the [REP] button. Press the [RDM] button. Each time you press the button, the Repeat Play Each time you press the button, Random Play alternates between the modes shown in the turns ON or OFF. tables below. When the Random mode is ON, "DISC RDM"/ "FOLD RDM"/"RDM ON" is displayed. In CD & Exte
Inhaltszusammenfassung zur Seite Nr. 18
CD/Audio file/External disc control features Function of Audio file Text/Title Scroll Folder Select Scrolling the displayed CD text, Audio file text, or MD title. Quickly selecting the folder you want to hear. Push the Control knob toward [FM] for at 1 Enter Folder Select mode least 2 seconds. Press the [F.SEL] button. "FOLD SEL" is displayed. During Select mode the folder information is • When the (page 22) is set to OFF, the display may black out while scrolli
Inhaltszusammenfassung zur Seite Nr. 19
HD Radio control features AUTO/AME Control knob 1-6 SRC Band display Frequency display ST indicator Preset station number About HD Radio Tuning Selecting the station. • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD 1 Select HD Radio source Radio tuner features. A portion of the setting Press the [SRC] button. methods including the Tuning Mode will Select the "HD RADIO" display. change. 2 Select the HD FM band • With the HD Radio tuner, you can use th
Inhaltszusammenfassung zur Seite Nr. 20
Menu system Control knob MENU SRC Menu display You can continue by returning to step 2 and Menu System setting other items. Setting beep sound during operation, etc. 4 Exit Menu mode functions. Press the [MENU] button. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation • When other items those applicable to the basic explanation. operation method above are displayed, their setting content chart is en
