Inhaltszusammenfassung zur Seite Nr. 1
KDC-MP4028
KDC-MP428
KDC-3028
KDC-328
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER-LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help
you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the spa
Inhaltszusammenfassung zur Seite Nr. 2
Contents Warning 3 HD Radio Control features 19 Tuning Safety precautions 4 Menu system 20 Notes 5 Menu System Security Code About CDs 6 Touch Sensor Tone Manual Clock Adjustment About AAC,MP3 and WMA 7 DSI (Disabled System Indicator) Dimmer General features 8 Switching preout Power Built-in Amp Setting Selecting the Source CRSC (Clean Reception System Circuit) Volume Receive mode Setting Attenuator SIRIUS ID (ENS) display System Q Auxiliary Input Display Setting Audio Control T
Inhaltszusammenfassung zur Seite Nr. 3
2Warning 2CAUTION NOTE Use of controls or adjustments or performance of This equipment has been tested and found to procedures other than those specified herein may comply with the limits for a Class B digital device, result in hazardous radiation exposure. pursuant to Part 15 of the FCC Rules. These limits In compliance with Federal Regulations, following are designed to provide reasonable protection are reproductions of labels on, or inside the product against harmful interference in a re
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. Note that any KENWOOD disc changers/ C
Inhaltszusammenfassung zur Seite Nr. 5
Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • If the unit fails to operate properly, press the Reset (page 24). button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails About SIRIUS Satellite radio
Inhaltszusammenfassung zur Seite Nr. 6
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
Inhaltszusammenfassung zur Seite Nr. 7
About AAC, MP3 and WMA (KDC-MP4028/KDC-MP428) The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is out of the File/Folder name: 64 characters specification, may not able to be played normally, MP3 ID3 Tag/ WMA Contents property: or the file and folder names may not be displayed 30 characters correctly. Playable Audio file • File/Folder name is the number of the
Inhaltszusammenfassung zur Seite Nr. 8
General features ATT/DIM VOL Control knob Release button Q SRC ATT indicator Clock display Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Attenuator Selecting the Source Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time the button is pressed, the Atte
Inhaltszusammenfassung zur Seite Nr. 9
Turn the [VOL] knob. System Q Adjustment Item Display Range You can recall the best sound setting preset for 1 2 3 Subwoofer level* * * "SW L" –15 — +15 different types of music. Bass level "BAS L" –8 — +8 1 Select the source to set Middle level "MID L" –8 — +8 Press the [SRC] button. Treble level "TRE L" –8 — +8 Balance "BAL" Left 15 — Right 15 2 Select the Sound type Fader "FAD" Rear 15 — Front 15 Press the [Q] button. When the button is pressed once, the current sound setting is displayed.
Inhaltszusammenfassung zur Seite Nr. 10
General features Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source for adjustment 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. 3 S
Inhaltszusammenfassung zur Seite Nr. 11
In Audio file source Function of the KDC-MP4028/KDC-MP428 (KDC-MP4028/KDC-MP428) Subwoofer Output Information Display Turning the Subwoofer output ON or OFF. Song title & Artist name* "TITLE" Hold down on [AM] of the Control knob for at Album name & Artist name* "ALBUM" least 1 second. Folder name "FOLDER" Each time the button is pressed, Subwoofer File name "FILE" output switches ON and OFF. Track number & Play time "P-TIME" When it’s ON, "SW ON" is displayed. Clock "CLOCK" In HD Radio source
Inhaltszusammenfassung zur Seite Nr. 12
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in "CALL" is displayed. 1 Press the Release button. The audio system pauses. Drop open the faceplate. Listening to the audio during a call 2 Drawing the faceplate to left side pull it to Press the [SRC] button. the front and remove it. The "CALL" display disap
Inhaltszusammenfassung zur Seite Nr. 13
Tuner features AUTO/ AME SRC 1 - 6 Control knob ST indicator Band display Frequency display Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time the button is pressed, the Tuning Press the [SRC] button. mode switches as shown below. Select the "TUNER" display. Tuning mode Display Operation 2 Select the band Auto seek "AUTO 1" Automatic search for a station. Push the Control knob to [FM] or [AM]. Preset
Inhaltszusammenfassung zur Seite Nr. 14
Tuner features Function of the KDC-MP4028/KDC-MP428 Auto Memory Entry Function of remote Putting stations with good reception in the Direct Access Tuning memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob to [FM] or [AM]. Press the [FM] or [AM] button. 2 Open Auto Memory Entry 2 Enter Direct Access Tuning mode Press the [AME] button for at least 2 seconds. Press the [DIRECT] button on the remote. When 6 statio
Inhaltszusammenfassung zur Seite Nr. 15
CD/Audio file/External disc control features Release button Control knob SRC SCAN RDM/ REP F.SEL M.RDM 3 IN indicator Track number Track time Disc number Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD CH" CD changer "MD CH" MD changer Pause and play Press the Control knob. Each time the knob is pressed, it pauses and plays. •
Inhaltszusammenfassung zur Seite Nr. 16
CD/Audio file/External disc control features Playing CD & Audio file Fast Forwarding and Reversing When there is no disc inserted Fast Forwarding Hold down on [¢] of the Control knob. 1 Drop open the faceplate Release your finger to play the disc at that point. Press the Release button. Reversing 2 Insert a disc. Hold down on [4] of the Control knob. 3 Push the faceplate on the left side, and return Release your finger to play the disc at that point. it to its former position. • The sound is n
Inhaltszusammenfassung zur Seite Nr. 17
Function of disc changers with remote Random Play Direct Disc Search Play all the songs on the disc or Audio file folder in random order. Doing Disc Search by entering the disc number. Press the [RDM] button. 1 Enter the disc number Each time the button is pressed, Random Play Press the number buttons on the remote. turns ON and OFF. 2 Do Disc Search When it’s ON, "DISC RDM"/"FOLD RDM" is Press the [+] or [–] button. displayed. Canceling Direct Disc Search Press the [38] button. • When the Co
Inhaltszusammenfassung zur Seite Nr. 18
CD/Audio file/External disc control features Function of the KDC-MP4028/KDC-MP428 Function of Audio file Folder Select Quickly selecting the folder you want to listen to. 1 Enter Folder Select mode Press the [F.SEL] button. "F-SELECT" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob to [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down an
Inhaltszusammenfassung zur Seite Nr. 19
HD Radio control features AUTO/ AME Control knob SRC 1 - 6 ST indicator Band display Frequency display Preset station number • With the HD Radio tuner, you can use the similar Tuning functions to , , , and of Tuner features. Refer to Tuner features for 1 Select HD Radio source how to use the functions. Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HF band Push the Control knob
Inhaltszusammenfassung zur Seite Nr. 20
Menu system Control knob MENU SRC Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting during operation beep sound etc. functions. The Menu system basic operation method is • When other items that are applicable to the basic explained here. The reference for the Menu items operation method above are displayed, afterwards their setting content chart is entered. (Normally the and their setting content is after this operation uppermost setting in the chart is the origina
