Inhaltszusammenfassung zur Seite Nr. 1
CD RECEIVER KD-LX333/KD-LX111
RECEPTOR CON CD KD-LX333/KD-LX111
RECEPTEUR CD KD-LX333/KD-LX111
This unit is equipped with display demonstration. To cancel it, see page 8.
Esta unidad está equipada con demostración en la indicación. Para cancelarla, consulte la
página 8.
Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler,
référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al
Inhaltszusammenfassung zur Seite Nr. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS .................. 15 Adjusting the sound ................................. 15 LOCATION OF THE BUTTONS ............ 4 II What is BBE ? ......................................... 15 Control panel ............................
Inhaltszusammenfassung zur Seite Nr. 4
MO ST RPT RND AF REG TP PTY BBE CEQ LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 u SSM BAND OFF SEL BBE DISP MODE ATT EQ MONO INT RPT RND 7 8 9 10 11 12 SB D M SOURCE 1 3 4 6 2 5
6 7 8 9 p q w e t y r *The control panel slides out when you press ON CLOSE. *When you press OFF 0, the display panel moves down and the CD loading slot appears. 1 Control dial 9 BAND MODE (M) button 2 CD loading slot • Also functions as SSM buttons when pressed 3 Display panel together with the DISP (D) button.
Inhaltszusammenfassung zur Seite Nr. 5
3 • Functions as the PRESET button while Remote controller listening to the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. 5 • Functions as the DISC – button while 6 1 listening to the CD changer. Each time you press the button, the disc 2 number decreases, and the selected disc 7 starts playing. 3 4 Functions the same as the control dial on the main unit. NOTE: This button does not function for the 4 preferred setting mode adju
Inhaltszusammenfassung zur Seite Nr. 6
3. Return the battery holder. Preparing the remote Insert again the battery holder pushing it until controller you hear a clicking sound. Before using the remote controller: (back side) • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor WARNING: • Store the battery in a place where children OFF INT RPT RND 12 cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. • Do not expose t
Inhaltszusammenfassung zur Seite Nr. 7
TP PTY MO ST RPT RND AF REG CEQ SSM BASIC OPERATIONS KD-LX300 BAND SEL BBE DISP MODE ATT EQ MONO INT RPT RND OFF SOURCE BBE BAND OFF 7 8 9 12 SBD M SOURCE 1 3 2 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. The display illuminates and the control panel and control dial come out. To decrease the volume. Volume level appears. DIRECTORY 2 Select the source. FILEDISC TRACK CD ATT Each time you press the button, SOURCE the source changes as follows: 4 Adjust
Inhaltszusammenfassung zur Seite Nr. 8
Canceling the demonstration Setting the clock When shipped from the factory, demonstration 1 Press and hold SEL (S) for more has been activated, and starts automatically than 2 seconds so that one of the when no operations are done for about 20 PSM items appears on the display. seconds. (See page 19.) • It is recommended to cancel the demonstration SEL before you use the unit for the first time. S To cancel the demonstration, follow the procedure below. 1 Press and hold SEL (S) for more 2 Set t
Inhaltszusammenfassung zur Seite Nr. 9
MO ST RPT RND AF REG TP PTY CEQ SSM RADIO BASIC OPERATIONS Press ON CLOSE to turn on the power. SEL BBE DISP MODE BAND ATT EQ MONO INT RPT RND OFF SBD M 7 8 9 12 SOURCE SSM BAND OFF SEL BBE DISP MODE ATT EQ MONO INT RPT RND SOURCE 7 8 9 10 11 12 SB D M 1 2 3 5 6 2 Start searching a station. Listening to the radio Press ¢ to search You can use either automatic searching or stations of higher frequencies. manual searching to tune in to a particular station. Press 4 to search stations of lower
Inhaltszusammenfassung zur Seite Nr. 10
MO ST RPT RND AF REG TP PTY MO ST RPT RND AF REG TP CEQ CEQ 2 Press and hold ¢ or 4 Storing stations in memory until “M” (manual) starts flashing on You can use one of the following two methods to the display. store broadcasting stations in memory. DIRECTORY • Automatic preset of FM stations: SSM (Strong- FILEDISC TRACK CD station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM 3 Tune in to a station you want while You can preset 6 local FM station
Inhaltszusammenfassung zur Seite Nr. 11
MO ST RPT RND AF REG TP PTY BBE TP PTY MO ST RPT RND AF REG CEQ CEQ Notes: Manual preset • A previously preset station is erased when a new You can preset up to 6 stations in each band station is stored in the same preset number. (FM1, FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex.: Storing an FM station of 88.3 MHz into the during battery replacement). If this occurs, preset preset number 1 of the FM1 band the
Inhaltszusammenfassung zur Seite Nr. 12
MO ST RPT RND AF REG TP PTY MO ST RPT RND AF REG TP PTY MO ST RPT RND AF REG TP CEQ CEQ CEQ SSM CD OPERATIONS Press ON CLOSE to turn on the power. SEL BBE DISP MODE BAND ATT EQ MONO INT RPT RND OFF SBD M 7 8 9 12 SOURCE SSM BAND OFF SEL BBE DISP MODE ATT EQ MONO INT RPT RND SOURCE 7 8 9 10 11 12 SB D M 1 2 3 5 6 Notes: Playing a CD • When a CD is in the loading slot, selecting “CD” as the source by pressing SOURCE ATT to starts 1 Open the loading slot. CD play. • When a CD is inserted upside d
Inhaltszusammenfassung zur Seite Nr. 13
TP PTY MO ST RPT RND AF REG MO ST RPT RND AF REG TP CEQ CEQ Locating a track or a Selecting CD playback modes particular portion on a CD To play back tracks at random (Random Play) To fast-forward or reverse the track You can play back all tracks on the CD at random. BAND Press and hold ¢, while 1 Press BAND MODE (M) while MODE M playing a CD, to fast-forward the playing a CD. “MODE” track. appears on the display, and the number buttons can work Press and hold4 , while as different function b
Inhaltszusammenfassung zur Seite Nr. 14
MO ST RPT RND AF REG RPT RND TP PTY BBE MO ST AF REG CEQ CEQ To play back only intros (Intro Scan) Playing a CD Text You can play back the first 15 seconds of each track sequentially. In a CD Text, some information about the disc (its BAND 1 Press BAND MODE (M) while disc title, performer and track title) is recorded. MODE M playing a CD. “MODE” You can show these disc information on the appears on the display, and display. the number buttons can work as different function buttons. Select text
Inhaltszusammenfassung zur Seite Nr. 15
MO ST RPT RND AF REG TP PTY BBE PTY BBE MO ST RPT RND AF REG TP CEQ CEQ SOUND ADJUSTMENTS II Adjusting the sound What is BBE ? II You can adjust the sound characteristics to your The BBE * function restores the brilliance and preference. clarity of the original live sound in recording, broadcasts, etc. 1 Select the item you want to adjust. When a speaker reproduces sound, it introduces SEL Each time you press the button, frequency-dependent phase shifting, causing S the adjustable items change
Inhaltszusammenfassung zur Seite Nr. 16
MO ST RPT RND AF REG TP PTY BBE MO ST RPT RND AF REG TP PTY BBE CEQ CEQ Indication For: Preset values Selecting preset sound modes II BASS TRE BBE (CEQ: custom equalizer) USER (Flat sound) 00 00 BBE OFF ROCK Rock or +03 +01 BBE 2 You can select a preset sound mode (CEQ: disco music custom equalizer) suitable to the music genre. CLASSIC Classical +01 –02 BBE OFF music 1 Press BAND MODE (M) to make the POPS Light music +04 +01 BBE OFF number buttons work as different HIP HOP Funk or Rap +02 00 BBE
Inhaltszusammenfassung zur Seite Nr. 17
TP PTY BBE MO ST RPT RND AF REG MO ST RPT RND AF REG TP PTY BBE CEQ CEQ • When “CEQ LINK” is set to “LINK ON” 4 Select the items you want to adjust. The selected sound mode can be stored in SEL • See page 15 for details. S memory for the current source. Each time you change to the same source, the same sound mode is also recalled and shown on the display. The CEQ indicator also flashes. • When “CEQ LINK” is set to “LINK OFF” 5 Adjust the level. The selected sound mode effect applies to any sour
Inhaltszusammenfassung zur Seite Nr. 18
MO ST RPT RND REG TP PTY AF MO ST RPT RND REG TP PTY AF MO ST RPT RND AF REG TP PTY CEQ CEQ CEQ OTHER MAIN FUNCTIONS Changing the general settings 3 Adjust the PSM item selected above. (PSM) You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display. Ex.: If you have turn the control dial (See page 19.) counterclockwise, “BEEP OFF” will app
Inhaltszusammenfassung zur Seite Nr. 19
Preferred Setting Mode (PSM) items SEL 3 S 1 2 Set... Factory-preset See settings page Counter- Hold. Select... clockwise Clockwise DEMO MODE Demo mode DEMO OFF DEMO ON DEMO ON 8 CLOCK HOUR Hour adjustment Back Advance 1:00 8 CLOCK MIN Minute adjustment Back Advance CEQ LINK Custom equalizer LINK OFF LINK ON LINK OFF 20 linkage CLOCK DISP Clock display CLOCK OFF CLOCK ON CLOCK ON 20 LEVEL Level display 5 types (see page 20) NORMAL 20 DIMMER Dimmer mode AUTO OFF AUTO 20 ON CRUISE Audio cruise
Inhaltszusammenfassung zur Seite Nr. 20
To set Custom Equalizer Link — CEQ LINK To select the dimmer mode — DIMMER A different sound mode (CEQ) can be stored in When you turn on the car head lights, the display memory for each source so that you can change automatically dims (Auto Dimmer). When the sound modes simply by changing the shipped from the factory, Auto Dimmer mode is sources. When shipped from the factory, this activated. mode is deactivated. • AUTO: Activates Auto Dimmer. • LINK ON: Different sound modes for • OFF: Cancels
