Inhaltszusammenfassung zur Seite Nr. 1
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-G801/KD-G701
KD-G801
ATT SOUND
U
KD-G801
SOURCE
R F
D
VOL VOL
KD-G701
ATT SOUND
U
KD-G701
R SOURCE F
D
VOL VOL
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf
Seite 8 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annu
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. How to reset your unit CAUTION: NEVER insert your finger in Press the reset button on between the control panel
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS ................... 31 How to use the MODE button ................... 2 Adjusting the sound .................................. 31 Selecting preset sound modes LOCATION OF THE BUTTONS ............ 4 (iEQ: intelligent equali
Inhaltszusammenfassung zur Seite Nr. 4
LOCATION OF THE BUTTONS Control panel Display window KD-G801 KD-G701 KD-G801 KD-G701 1 Remote sensor Display window 2 (standby/on attenuator) button f Disc information indicators— (track/file), 3 DISP (display) button TAG (ID3 Tag), (folder) 4 SEL (select) button g MP3 indicator 5 Control dial h Only for KD-G801: CH (CD changer) indicator 6 Display window j CD indicator 7 TP/PTY (traffic programme/programme type) k Only for KD-G801: LINE indicator button l WMA indicator 80 (eject) button / (an
Inhaltszusammenfassung zur Seite Nr. 5
3 • Selects the preset stations (or services*) Remote controller while listening to the radio (or the DAB tuner*). Each time you press the button, the preset station (or service*) number increases, and ATT SOUND the selected station (or service*) is tuned in. • Skips to the first file of the previous folder while listening to an MP3 or a WMA disc. Each time you press the button, you can U move to the previous folder and start playing the first file. SOURCE F R • While playing an MP3 disc on an M
Inhaltszusammenfassung zur Seite Nr. 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) WARNING: • Store the battery in a place where children Remote sensor cannot reach. • Do not expose the remote sensor to strong If a child accidentally swallows the battery, light (direct sunli
Inhaltszusammenfassung zur Seite Nr. 7
BASIC OPERATIONS 1 3 2 Volume level appears. Turning on the power 1 Turn on the power. Volume level indicator 4 Adjust the sound as you want. Note on One-Touch Operation: (See pages 31 – 33.) When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. To drop the volume in a moment 2 Select the source. Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a m
Inhaltszusammenfassung zur Seite Nr. 8
Canceling the display 3 Select “DEMO OFF.” demonstration When shipped from the factory, display demonstration has been activated, and starts DEMO OFF DEMO ON automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
Inhaltszusammenfassung zur Seite Nr. 9
Setting the clock 4 Set the clock system. 1 Select “CLOCK24H/12H.” You can also set the clock system to either 2 Select “CLOCK 24HOUR” or “CLOCK 24 hours or 12 hours. 12HOUR.” 12 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 34 and 35.) 5 Finish the setting. 2 Set the hour. 1 Select “CLOCK HOUR” if not shown on the display. 2 Adjust the hour. 12 Note: To show the clock time on the display, see page 36. To check other in
Inhaltszusammenfassung zur Seite Nr. 10
RADIO OPERATIONS Listening to the radio 2 Start searching for a station. To search for stations of You can use either automatic searching or manual higher frequencies searching to tune in to a particular station. Searching for a station automatically: To search for stations of lower frequencies Auto search When a station is received, searching stops. 1 Select the band (FM1 – 3, AM). To stop searching before a station is received, press the same button you have or pressed for searching. (For KD-G
Inhaltszusammenfassung zur Seite Nr. 11
When an FM stereo broadcast is hard to 2 Press and hold ¢ or 4 receive: until “M” (manual) starts flashing on the display. 1 Press MODE to enter the functions mode while listening to an FM stereo broadcast. 2 Press MO (monaural), while “MODE” is still on the display, so that “MONO” appears on the display. Each time you press the button, the monaural mode turns on 3 Tune in to a station you want while and off alternately. “M” (manual) is still flashing. To tune in to stations of higher frequenc
Inhaltszusammenfassung zur Seite Nr. 12
Manual preset 2 Press MODE to enter the functions mode. You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band. 3 Press and hold SSM for about 1 Select the band (FM1 – 3, AM) you 2 seconds. want to store stations into (in this example, FM1). or (For KD-G801) (For KD-G701) Each time you press the button, the band changes as follows: “SSM” appears, then disappears when automatic preset is over. FM
Inhaltszusammenfassung zur Seite Nr. 13
3 Press and hold the number button Tuning in to a preset station (in this example, 1) for more than You can easily tune in to a preset station. 2 seconds. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 11 – 13. Preset number flashes for a while. 1 Select the band (FM1 – 3, AM). or (For KD-G801) (For KD-G701) Each time you press the button, the band 4 Repeat the above procedure to store changes as follows: other stations int
Inhaltszusammenfassung zur Seite Nr. 14
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF ON” is send their station names, as well as information selected. about what type of programme they broadcast, suc
Inhaltszusammenfassung zur Seite Nr. 15
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from (PSM: see pages 34 and 35.) the current source (another FM station, CD, or other connected components). • TA Standby Reception will not work if you are listening to an AM station. Press TP/PTY to activate TA Standby Reception. 2 Select “AF-REG” (alternative frequency/regio
Inhaltszusammenfassung zur Seite Nr. 16
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from the current source (another FM station, CD, or other connected components). • PTY Standby Reception will not work if you are 7 When the current source is FM, the PTY listening to an AM station. indicator either lights up or flashes. • If the PTY indicator lights up, PTY Standby You can select your favorite programme type for Reception
Inhaltszusammenfassung zur Seite Nr. 17
Searching your favorite programme 3 Press and hold the number button for more than 2 seconds to store the You can search any one of the PTY codes. In addition, you can store your 6 favorite PTY code selected into the preset programme types in the number buttons. number you want. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search for your favorite programme type, see page 18.
Inhaltszusammenfassung zur Seite Nr. 18
To search for your favorite programme 3 Press ¢ or 4 to start PTY type search for your favorite programme. 1 Press and hold TP/PTY for more than 2 seconds while listening to an FM station. • If there is a station broadcasting a programme of the same PTY code as you selected, that station is tuned in. • If there is no station broadcasting a The last selected PTY code appears. programme of the same PTY code as you selected, the station will not change. 2 To select one of your favorite programme
Inhaltszusammenfassung zur Seite Nr. 19
Setting the TA volume level Other convenient RDS You can preset the volume level for TA Standby functions and adjustments Reception. When a traffic programme is received, the volume level automatically changes to the Automatic selection of the station preset level. when using the number buttons • See also “Changing the general settings (PSM)” on pages 34 and 35. Usually when you press the number button, the preset station is tuned in. 1 Press and hold SEL (select) for more than However, when the
Inhaltszusammenfassung zur Seite Nr. 20
PTY codes NEWS: News SOCIAL: Programmes on social AFFAIRS: Topical programmes expanding activities on current news or affairs RELIGION: Programmes dealing with any INFO: Programmes which impart aspect of belief or faith, or the advice on a wide variety of topics nature of existence or ethics SPORT: Sport events PHONE IN: Programmes where people can EDUCATE: Educational programmes express their views either by DRAMA: Radio plays phone or in a public forum CULTURE: Programmes on national or TRAVEL
