Inhaltszusammenfassung zur Seite Nr. 1
XHD6420
INSTALLATION/OWNER'S MANUAL
AM/FM/CD/MP3/WMA/3.5mm Receiver
with Built-In HD Radio™ and Detachable Face
R
Inhaltszusammenfassung zur Seite Nr. 2
XHD6420 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit, • Remove transit screws located on top of the unit. • Insert the supplied keys int
Inhaltszusammenfassung zur Seite Nr. 3
XHD6420 INSTALLATION Wiring Diagram Antenna Connector FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XHD640 uses one 10 amp ATM fuse located beside the wiring connector.
Inhaltszusammenfassung zur Seite Nr. 4
XHD6420 OPERATION Control Locations - Receiver 1 2 3 4 5 6 7 8 9 24 15 14 13 10 23 22 21 20 19 18 17 16 12 11 Release Preset 6/Folder Up 1 13 Eject Preset 5/Folder Down 2 14 Mode/Search Preset 4 3 15 Volume/Audio/Setup Preset /Intro 4 16 5 Tune/Track Up Preset /Random 17 6 IR Remote Sensor Preset 1/Repeat 18 7 Loudness Auto Store/Preset Scan/Enter 19 8 EQ/Key 9 Band/Play/Pause 20 9 Display/Key 0 HD Seek 21 10 Auxiliary Input 22 Mute 11 Tuner Scan/Key 8 Tune/Track Down 23 12 Key 7 Power 2
Inhaltszusammenfassung zur Seite Nr. 5
XHD6420 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Semi-Permanent Remove trim ring and install supplied #1 x 7/” Phillips Faceplate Installation head screw through left side of mounting frame into faceplate. Power On/Off Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically.
Inhaltszusammenfassung zur Seite Nr. 6
XHD6420 OPERATION General Operation Set the Clock With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE to adjust the hours and nn TUNE to adjust the minutes. Press DISP momentarily to ll save the selected time. Setup Menu Press and hold the rotary encoder for more than seconds to access the setup menu. Press the rotary encoder momentarily to select between the menu functions and rotate the rotary encoder left/right to adjust or activat
Inhaltszusammenfassung zur Seite Nr. 7
XHD6420 OPERATION General Operation Audio Press rotary encoder momentarily to select between Volume (default), Bass, Treble, Balance, & Fader. VOLUME BASS TREBLE BALANCE FADER Bass Press rotary encoder until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Treble Press rotary encoder until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Balance Press rotary encoder until BAL appears then rotate encoder left/right to adjust
Inhaltszusammenfassung zur Seite Nr. 8
XHD6420 OPERATION HD Radio™ AM/FM Tuner Operation Analog and Digital Tuning The following tuning functions will access both analog and digital stations. Refer to the HD SEEK mode section on page 10 for instructions on tuning to only digital stations. Seek Tuning Press TUNE or TUNE momentarily to seek the nn ll next strong station. When an HD Radio station is selected, an HD Radio logo will begin to flash on the display. In about five seconds, HD or HD1 will illuminate after
Inhaltszusammenfassung zur Seite Nr. 9
XHD6420 OPERATION HD Radio™ AM/FM Tuner Operation Automatically Store Press AS/PS for more than two seconds to automatically Stations store the six strongest stations in the current band. Automatic local tuning is activated during initial band scan. Preset Scan Press AS/PS momentarily to scan presets 1-6 on the current band, pausing for five seconds at each. Press AS/PS again to cancel. Band Press BAND to select FM1, FM, FM, AM1 or AM. Display When the unit is tuned to an anal
Inhaltszusammenfassung zur Seite Nr. 10
XHD6420 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation (tuner or AUX). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning of the next ll track. Press TRACK to retur
Inhaltszusammenfassung zur Seite Nr. 11
XHD6420 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc When an MP/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information Press DISP to select between track number/elapsed time (default), clock, track name, directory name, title, artist and album. “NO ID TAG” will be displayed if the MP file contains no ID tag information. “UNKNOWN”
Inhaltszusammenfassung zur Seite Nr. 12
XHD6420 OPERATION CD Player Operation - MP3/WMA Files Refer to the following button function table when selecting, searching or navigating MP/WMA files and folders: MP3/WMA Button Function Table Button Function SEARCH Direct Select, Search and Navigate Modes Enter/Confirm Preset #1 A, B, C, 1 Preset # D, E, F, Preset # G, H, I, Preset #4 J, K, L, 4 Preset #5 M, N, O, 5 Preset #6 P, Q, R, 6 Key #7 S, T, U, 7 Key #8 V, W, X, 8 Key #9 Y, Z, /, 9 Key #0 -, _, +, 0 Rotary Encoder (p
Inhaltszusammenfassung zur Seite Nr. 13
XHD6420 OPERATION CD Player Operation - MP3/WMA Files Alphanumeric File Press SEARCH for more than seconds, then release. or Folder Search Press SEARCH again, an " " will flash in the display. * Step 1 Use the buttons in the table on page 1 ( character maximum input) or the rotary encoder to enter the desired alphanumeric search characters. Press the rotary encoder to advance one character to the right. Step 2 Press to initiate the selected alphanumeric search. S
Inhaltszusammenfassung zur Seite Nr. 14
XHD6420 OPERATION CD Player Operation - MP3/WMA Files Navigating Note After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default. Press DISP momentarily to select clock, track name, directory name, title, artist and album. *Folder Access Press to select the previous folder. Press to select the next folder. *Folder access is only available on MP/WMA discs recorded with more than
Inhaltszusammenfassung zur Seite Nr. 15
XHD6420 OPERATION CD Player Operation - MP3/WMA Files Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management). • WMA lossless format • Discs recorded with Track At Once or packet writing • MP PRO format • MP playlists • WAV format Playback Order MP/WMA playback sequence is based on reco
Inhaltszusammenfassung zur Seite Nr. 16
XHD6420 OPERATION CD Player Operation - MP3/WMA Files Additional MP3/WMA An internal buffer provides ESP (Electronic Skip Protection) to Information virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP/WMA files, the unit will play the MP/WMA files only. Only MP files with filename extension (.mp ) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP/W
Inhaltszusammenfassung zur Seite Nr. 17
XHD6420 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. What to do? You may also have other rights which vary from 1. Before you call for service, check the state to state. troubleshooting guide in your owner’s manual. A slight adjustment of any custom Dual Electronics Corp. warrants this product to controls may save you a service call. the original purchaser to be free from defects in material and workmanship for a period of one . If you require se
Inhaltszusammenfassung zur Seite Nr. 18
XHD6420 OPERATION Troubleshooting Problem Cause Action Yellow wire not connected or incorrect voltage Check connections for proper Unit will not turn on Red wire not connected or incorrect voltage voltage (11~16VDC) (no power) Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected Check connections at speakers Unit has power One or more speaker wires touching each Insulate all bare speaker wires from (but no sound) other or touc
Inhaltszusammenfassung zur Seite Nr. 19
XHD6420 OPERATION Specifications CD Player Frequency response: 10Hz-0kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit FM Tuner Tuning range: 87.5MHz-108.1MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB HD radio stereo separation @ 1kHz: 85dB Frequency response: 0Hz-1kHz HD radio frequency response: 0Hz-0kHz AM Tuner Tuning range: 50kHz-1710kHz Usable sensitivity: uV Frequency response: 40~KHz HD radio frequency re
Inhaltszusammenfassung zur Seite Nr. 20
Dual Electronics Corp. Toll Free: 1-866-8-5476 www.dualav.com ©007 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries. HD Radio™ Technology Manufactured Under License from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD Radio logo are proprietary trademarks of iBiquity Digital Corp. Other trademarks and trade names are those
