Bedienungsanleitung Dolby Laboratories KDC-W8534

Inhaltszusammenfassung zur Seite Nr. 1

CD-RECEIVER
KDC-W8534
INSTRUCTION MANUAL
© B64-3304-00/01 (EW, E2W)

Inhaltszusammenfassung zur Seite Nr. 2

Contents Safety precautions 4 Tuner features 25 Tuning Notes 5 Direct Access Tuning Station Preset Memory About CDs 7 Auto Memory Entry Preset Tuning About AAC, MP3 and WMA 8 RDS features 27 Notes on Multi-function Key System 9 Traffic Information Radio Text Scroll General features 10 PTY (Program Type) Power Program Type preset Selecting the Source Changing Language for PTY Function Volume CD/Audio file/External disc control Attenuator features 30 Audio Control Subwoofer Output Playing CD & Au

Inhaltszusammenfassung zur Seite Nr. 3

Menu system 37 Basic Operations of remote control 47 Menu System Accessories/ Installation Procedure 49 Security Code Touch Sensor Tone Connecting Wires to Terminals 50 Manual Clock Adjustment Date Adjustment Installation 52 Date Mode Synchronize Clock Removing the Unit 53 DSI (Disabled System Indicator) Selectable Illumination Troubleshooting Guide 54 Display Illumination Control Dimmer Specifications 58 Built-in Amp Setting Dual Zone System Setting B.M.S. (Bass Management System) B.M.S. Freque

Inhaltszusammenfassung zur Seite Nr. 4

Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the unit, the adapter might separate from the CD and following precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) About CD players/disc changers inside the unit. connected to this unit • Do not watch or fix your eyes on the unit’s display Kenwood disc changers

Inhaltszusammenfassung zur Seite Nr. 5

Notes • If you experience problems during installation, Cleaning the Faceplate Terminals consult your Kenwood dealer. If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. Before using this unit for the first time • If the unit fails to operate properly, press the Reset This unit is initially set on the Demonstration mode. bu

Inhaltszusammenfassung zur Seite Nr. 6

Notes About "Media Manager" of PC application The marking of products using lasers attached to KDC-W8534 (Except for some areas) • "Media Manager" is recorded in the CD-ROM attached to this unit. • Refer to the attached installation manual for the installation method of "Media Manager". • Refer to the user’s manual in the installation The label is attached to the chassis/case and says CD-ROM and Help of "Media Manager" for the that the component uses laser beams that have operation met

Inhaltszusammenfassung zur Seite Nr. 7

About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u

Inhaltszusammenfassung zur Seite Nr. 8

About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not conforming File/Folder name: 128 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property file and folder names may not display correctly. : 30 characters Playable Audio file AAC song information: 60 characters • AAC, MP3, WMA • File/Folder name

Inhaltszusammenfassung zur Seite Nr. 9

Notes on Multi-function Key System Multi-function Key System serves to control various Real operational example of the Multi- functions with the [1] — [6] buttons. function Key System The basic operation of the Multi-function Key Example: T urning ON/OFF the Random Play during System is described below. CD play. 1. Show the function display of the Random Play. If "RDM" is not shown in the display, press the What is the Multi-function Key System? [NEXT] button to alternate the sections until

Inhaltszusammenfassung zur Seite Nr. 10

General features Control knob ATT VOL ANG NEXT 1 – 6 SRC Release button Power • This unit automatically turns full power OFF after 20 Turning ON the Power minutes lapses in Standby mode in order to save the Press the [SRC] button. vehicle's battery. The time until full power OFF can be set in (page 44). • When the power is ON, the (page 38) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Inc

Inhaltszusammenfassung zur Seite Nr. 11

Attenuator Subwoofer Output Turning the volume down quickly. Turning the Subwoofer output ON or OFF. Press the [ATT] button. Push the Control knob toward [AM] for at Each time you press the button, the Attenuator least 2 seconds. turns ON and OFF. Each time you press the button, Subwoofer When the Attenuator is ON, "ATT" is displayed. output switches ON and OFF. When it is ON, "SW ON" is displayed. • You can control this item when Speaker Select Audio Control Subwoofer of

Inhaltszusammenfassung zur Seite Nr. 12

General features Audio Setup Sound Field Control Setting the Sound system, such as Volume offset 1 Select the source to adjust and Dual Zone. Press the [SRC] button. 1 Select the source to adjust 2 Select the key function section Press the [SRC] button. Press the [NEXT] button. Repeatedly press the button until "S.F.C" is 2 Enter Audio Setup mode displayed above the [1] button. Press the [VOL] knob for at least 1 second. Refer to 3 Select the Audio Setup i

Inhaltszusammenfassung zur Seite Nr. 13

• "Preset": Y ou can store an adjusted audio control value by selecting "MEM". Refer to (page 17). Also, you can recall it by selecting "RCL". Refer to (page 17). • X'Over (Crossover Network Setup) You can manually set a crossover frequency for the speakers. • DTA (Digital Time Alignment) Manually set the sound output timing of each channel. 5 Adjust the Sound Field Control item Push the Control knob towards [4] or [¢]. Each time you push the knob, the s

Inhaltszusammenfassung zur Seite Nr. 14

General features Sound Management system Sound Managemnt Item Range Cabin Setting OFF/ Compact/ Sedan/ Wagon1/ Wagon2/ Mini Van1/ MiniVan2/ SUV/ 1 Select the source to adjust Passenger Van Press the [SRC] button. Speaker Select Front 16cm/ 17cm/ 18cm/ 4x6/ 5x7/ 6x8/ 6x9/ 2 Select the key function section 7x10/ O.E.M./ 10cm/ 13cm Press the [NEXT] button. Speaker Select Rear 16cm/ 17cm/ 18cm/ 4x6/ 5x7/ 6x8/ 6x9/ Repeatedly press the button until "S.M.S" is 7x10/ None/ O.E.M./ 10cm/ 13cm displ

Inhaltszusammenfassung zur Seite Nr. 15

Equalizer Control • User memory: 1 Select the source to adjust The values set on the

Inhaltszusammenfassung zur Seite Nr. 16

General features • FOCUS: Adjusts the vertical position of the front WOW Control speaker and sound image by virtual adjustment. 1 Select the source to adjust • TruBass: Assists the playback for the super bass sound. Press the [SRC] button. • SRS 3D: Makes a natural 3D sound field. • You cannot set SRS 3D in tuner source. 2 Select the key function section Press the [NEXT] button. 6 Exit WOW Control mode Repeatedly press the button until "WOW" is Press the [6] ("RTN") button. displayed abo

Inhaltszusammenfassung zur Seite Nr. 17

Memory mode 5 Select the recall item Press the [1] ("RCL 1")/ [2] ("RCL 2") button for Storing the values of Field Control in memory. at least 2 seconds. "RCL 1": Recall the value put in "MEM.1" by 1 Adjust the item you wish to put in memory (page 17). By referring to (page 12), "RCL 2": Recall the value put in "MEM.2" by (page 14), and (page 17). (page 15), adjust the item you wish to put in

Inhaltszusammenfassung zur Seite Nr. 18

General features Theft Deterrent Faceplate Faceplate Angle Adjustment The faceplate of the unit can be detached and Press the [ANG] button for at least 1 second. taken with you, helping to deter theft. Removing the Faceplate • Do not apply excessive force to the faceplate. It can Press the Release button. cause damage. The faceplate is unlocked, allowing you to detach it. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio s

Inhaltszusammenfassung zur Seite Nr. 19

Display Type Selection Changing the display mode. • Under the display type other than "Display Type D", the function item is not displayed. When you select 1 Select the key function section the display type other than "Display Type D", press [1] Press the [NEXT] button. to [6] buttons or [NEXT] button. The function item will Repeatedly press the button until "DISP" is be displayed approximately 5 seconds. displayed above the [6] button. • The indicator is displayed when the display type is

Inhaltszusammenfassung zur Seite Nr. 20

General features Display Type A/ Display Type B Display Type A/ Display Type B Graphic part Display Switching Wallpaper selecting Changing the graphic Display. Selecting a wallpaper to display when Display Type is set to "Display Type A"/ "Display Type B". 1 Select the key function section Press the [NEXT] button. 1 Select the wallpaper display Repeatedly press the button until "DISP" is Refer to (page displayed above the [6] button. 20). Refer to