Inhaltszusammenfassung zur Seite Nr. 1
Radio / CD
München RDM 169 US
Operating instructions
Inhaltszusammenfassung zur Seite Nr. 2
2 3 4 1 5 10 8 7 13 12 11 9 6 19 18 14 15 20 21 1 3 17 16 2 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents Repeating a track/CD ........................... 23 Condensed instructions................ 4 Radio operation with RDS........... 16 TPM (Track Program Memory)............. 23 Activating/deactivating RDS ................. 16 Remote control RC 08 ................. 11 MIX ........................................................ 24 AF - alternative frequency .................... 16 Selecting MIX functions .................... 24 Important ...................................... 12 Selecting
Inhaltszusammenfassung zur Seite Nr. 4
Condensed instructions 2 ON Switching the unit on/off using the 1 Disengaging the fold-down control Switching on the unit KeyCard panel Insert the KeyCard and press ON brief- Insert/remove the KeyCard to switch Disengage the control panel to insert ly. the unit on and off. or remove the KeyCard and CD. The unit is switched on in the last op- Refer also to the description of the To disengage the control panel, press erating mode selected and with the KeyCard anti-theft system @ in the knob 1: the
Inhaltszusammenfassung zur Seite Nr. 5
Condensed instructions 3 Adjusting the volume Menu level 1 Menu level 2 Turn the knob to adjust the volume. Station keys and memory levels Adjusting radio functions The selected value is shown on the display. When switched on, the unit NEXT - FM NEXT - FM plays at the preselected volume (ON Switch between the memory levels Switch between the memory levels VOL). FM I, FM II, FM T. FM I, FM II, FM T. ON VOL can be changed (refer to NEXT - AM, AMT NEXT - AM, AMT “Programming with DSC – ON VOL”)
Inhaltszusammenfassung zur Seite Nr. 6
Condensed instructions Press SCA for approx. 1 second (Pre- for a frequency with better reception key (hold down for approx. 2 seconds set Scan) – for the same station. until the beep sounds). a beep sounds, “SCAN” appears in the AF on/off: Select menu level 2 using display alternately with the code TU and hold AF down. CD and changer mode of the sampled station. The stations stored on the station keys EXIT and which can be received are sam- Press the key briefly to terminate or pled briefly. ab
Inhaltszusammenfassung zur Seite Nr. 7
Condensed instructions SCA - Scan TPM - Track Program Memory 6 Rocker For sampling the tracks briefly (in CD For storing and playing preferred Radio mode changer mode, the tracks of all CDs). tracks in CD and CD changer mode. If the rocker is pressed on menu level Up to 30 CDs can be managed in CD 2, menu level 1 is automatically called Starting Scan: mode and 99 CDs in changer mode up. Press SCA. The tracks are sampled with a maximum of 40 tracks per CD. briefly in turn in ascending order. The
Inhaltszusammenfassung zur Seite Nr. 8
Condensed instructions CD and CD changer mode 7 DSC (Direct Software Control) The values selected are shown on the You can adjust programmable default display. The last setting selected is settings using DSC. stored automatically. Further information: “Programming with DSC”. Particular feature of loudness: The values can be selected between LOUD 6 and LOUD OFF by means of 8 AUD the rocker / . For adjusting the treble, bass, balance << / >> Select CD (changer mode only) (left/right), fader (front
Inhaltszusammenfassung zur Seite Nr. 9
Condensed instructions 9 DIS Changer mode Selecting various display modes. Press DIS briefly: - CD number, track number, time Radio mode - CD number, track number, time Press DIS briefly: played - Name of the selected station - CD name, track number - Currently selected frequency TRACK 13 - Track number - PTY code or : Display A condition is that an RDS station can VIVALDI - CD name (CD changer mode) be received with an adequate field or CD 5 T 2 - CD number and track number strength. (CD change
Inhaltszusammenfassung zur Seite Nr. 10
Condensed instructions ; CDC The ignition is off and LED ON is se- Remove the KeyCard following the Switch to changer mode (only if a lected in the DSC menu (factory de- procedure in reverse. changer is fitted). fault setting). Important: read the information under If a changer is not fitted, AUX is selec- “KeyCard anti-theft protection system”. Further information: “Programming ted. Condition: AUX ON must be se- with DSC, LED ON/OFF”. lected in the DSC menu. A Eject Hold the key for CD ejection
Inhaltszusammenfassung zur Seite Nr. 11
Remote control RC 08 D Keys <>, / E Switching replay on/off: Radio mode Press briefly. “MUTE” appears on Station seek the display when the sound is switched 19 Up off. Down 18 <> Up/down in steps (on FM only when AF is deactivated) FM only: 20 21 <> Page through the transmission chains, if AF is on, e.g. NDR 1, 2, 3, 4, N-JOY ... . CD and changer mode B V- / V+ <> Select CD (changer mode Adjust the volume only) >> Up: Press briefly C SRC (Source) << Down: Press briefly Select the op
Inhaltszusammenfassung zur Seite Nr. 12
Important CD changer Read the following before using Telephone mute The following CD changers can be fitted di- the unit If a mobile phone is connected, radio and rectly: CD sound can be muted automatically when Before using the car radio, read the follow- CDC A 06, A 071, A 072, A 08, IDC A 09. the phone is in use (telephone mute). ing instructions carefully. CD changers A 05 and A 071 can be fitted “PHONE” then appears on the display. by means of the 7 607 889 093 adapter ca- ble. Traffic safe
Inhaltszusammenfassung zur Seite Nr. 13
KeyCard anti-theft protection system Two KeyCards are supplied with the unit. • Slide the card as far as possible to the right, and remove from the front. Should you lose or damage a KeyCard, you can obtain a replacement from a specialist • Engage the control panel. dealer. For safety reasons, the control If you are using two KeyCards, the settings panel must always be engaged are taken from the first KeyCard. 1 whilst the vehicle is moving. 3 You can customize the following functions: • Slide t
Inhaltszusammenfassung zur Seite Nr. 14
KeyCard anti-theft protection system The unit is now also ready for operation with The unit is switched off; the control panel is Teaching in the new KeyCard the new KeyCard. open; the KeyCard is removed; LED ON is • Insert the new KeyCard and engage selected in the DSC menu (default factory A maximum of two KeyCards can be taught the control panel. setting). in. • Press ON. If necessary, refer to “Programming with If a third KeyCard is taught in, the card which DSC – LED”. • Press TU and ST1 wi
Inhaltszusammenfassung zur Seite Nr. 15
Selecting the operating Enhancing display mode legibility You can select from the radio (TU), CD and The display can be adjusted to your pre- CDC changer modes. ferred viewing angle in order to enhance legibility. CD mode can be selected only if a CD is inserted. Proceed as follows: CDC can be selected only if a Blaupunkt A • Press DSC. 06, A 072, A 08 or A 05, A 071 or IDC A 09 “ANGLE” appears on the display. CD changer is connected and a magazine containing at least one CD is inserted. Togglin
Inhaltszusammenfassung zur Seite Nr. 16
Radio operation with RDS (Radio Data System) The Radio Data System provides FM recep- Note: AF - alternative frequency tion with enhanced convenience. AF is deactivated when you switch off RDS. The AF (alternative frequency) function en- An increasing number of radio stations now sures that the best available frequency of broadcast RDS information supplementary Selecting the frequency band the station being received is selected auto- to the program proper. matically. You can select from the foll
Inhaltszusammenfassung zur Seite Nr. 17
Radio operation with RDS (Radio Data System) If necessary, these functions can be deacti- • Press NEXT briefly and repeatedly un- Station tuning vated on menu level 2. til the desired memory level appears Station seek / on the display. Manual tuning: • Press / : the radio automatically looks for the next station. • Press << >>: the frequency is in- If / is held down at the top or bottom, the creased/reduced in steps. seek run continues forwards or backwards Hold the << >> rocker down to the righ
Inhaltszusammenfassung zur Seite Nr. 18
Radio operation with RDS (Radio Data System) Note: Calling up stored stations Sampling stored stations with Should you store a station which has already Preset Scan You can call up stored stations at the touch been stored, the corresponding station key of a button. You can sample stored stations briefly on and the memory level flash briefly if a differ- all frequency bands and on the selected FM ent memory level is called up. FM memory level. Call up the stations directly on the selected Preset
Inhaltszusammenfassung zur Seite Nr. 19
Radio operation with RDS (Radio Data System) Sampling stations with Changing the sampling time Toggling between stereo and Radio Scan (Scan) mono (FM) You can sample briefly the stations which The sampling time can be selected between You can toggle between stereo and mono can be received on the selected frequency 5 and 30 seconds. in the DSC menu. This can be useful in ar- band. eas where reception is critical. When the unit If you wish to change the duration of the is switched on, stereo is se
Inhaltszusammenfassung zur Seite Nr. 20
Radio operation with RDS (Radio Data System) After the beep, the program type of the sta- PTY – Program Type Condition: PTY is activated. tion currently being received is displayed. The program types listed below are avail- This is an RDS service which is being im- able: If “NONE” is displayed, the station has no plemented progressively by the radio sta- PTY code. tions. The service enables FM stations to NEWS be selected according to a specific program INFORM Displaying the selected program typ
