Inhaltszusammenfassung zur Seite Nr. 1
VOD10PS2
10.2" OVERHEAD LCD
MONITOR WITH
SONY PS2 PLAYER
MENU / ENTER
OPERATION
MANUAL
128-8667A
Inhaltszusammenfassung zur Seite Nr. 2
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occ
Inhaltszusammenfassung zur Seite Nr. 3
FEATURES Congratulations Congratulations on your purchase of the AUDIOVOX 10.2” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor VOD10PS2 Player with Drop-Down Video / Monitor. The VOD10PS2 has been designed to give you and your family Built-in SONY PlayStation2 game console many years of video entertainment in the mobile S 2ONY PlayStation2 Wireless Game Controllers environment. Please read the directions that follow to familiarize yourself with the product to
Inhaltszusammenfassung zur Seite Nr. 4
QS UICK TARTGUIDE 1. Insert batteries into the PlayStation2 game controllers and the remote control. Game controller transceivers are preinstalled when the unit is shipped. 2. Turn the vehicle on. Running this unit on battery power (accessory key setting) will drain the battery. 3. Press the screen release button to lower the LCD screen. Swing the screen back to allow the PlayStation2 to drop down. 4. Push the PlayStation2 release button to drop down the PlayStation2. 5. Press the (open) button
Inhaltszusammenfassung zur Seite Nr. 5
QUICK START GUIDE (Cont) 11. When using the wireless headphones install the batteries in each headphone. Turn the volume to minimum before turning them on. Once they are turned on, place them on your head (pay attention to R/L earpieces) and slowly adjust the volume to a comfortable listening level. 12. When listening to the system over the vehicle radio: a. Using the remote control: i. to turn on the FM modulator by pressing FMM ON/OFF ii. Select an FM frequency by pressing FMM Select. iii. Tun
Inhaltszusammenfassung zur Seite Nr. 6
QUICK START GUIDE (Cont) Using the Control Panel To access the Control Panel press the dark gray DISPLAY or dark gray SELECT button. The Control Panel (Below) can be used to navigate the DVD disc. Refer to figure below: Pressing the dark gray DISPLAY or dark gray SELECT button again will cause the Control Panel to change its position on the screen. Pressing the DISPLAY or SELECT button a third time will turn off the Control Panel. Use the dark directional buttons ( ) to select an icon. When
Inhaltszusammenfassung zur Seite Nr. 7
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1. SOURCE Button (S) Use to select the sources: PS2, AV1 andAUX. 2. CURSOR Buttons () 7 6 5 4 3 2 1 Use these buttons to access menu selections on the screen. 3. MENU/ENTER Button MENU / ENTER Use this button to access SYSTEM MENU and select system menu items. 4. Infrared Transmitter and Sensor 13 Transmits audio to wireless headphones, allows the remote control to operate the unit and to control other accessories in the system. 14 15 5. POWER But
Inhaltszusammenfassung zur Seite Nr. 8
11. LCD Panel CONTROL FUNCTION DESCRIPTION (SIDE VIEW) 12. Screen Release Press to release the screen. 1 2 3 4 13. LCD Cut Off Switch R AUDIO L VIDEO Used to turn off the LCD backlit when the LCD is in the closed position. 14. OPEN Push to open the PlayStation2 tray. 15. OPEN () 1. HEADPHONE JACK The disc tray opens. For wired headphone with a 1/8” (3.5mm) plug. 16. RESET ( ) 2. Auxiliary Audio Right Input ON/Standby and RESET indicator. 3. Auxiliary Audio Left Input 4. Auxiliary Video Input 8
Inhaltszusammenfassung zur Seite Nr. 9
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION Back View OPEN/ CLOSE RESET P1 P36 AUDIO SHUFFLE P2 1 2 3 P35 P3 ANGLE PROGRAM 4 5 6 P4 P5 SUBTITLE REPEAT P6 7 89 P7 SLOW CLEAR TIME 0 P34 P8 P33 SCAN PREV NEXT A-B P32 P9 P31 PLAY PAUSE STOP P30 P10 MENU P29 DISPLAY TOP MENU RETURN P11 P28 P12 P27 P13 P26 Battery Cover ENTER P14 P15 P25 P16 P24 P17 L1 L3 R3 R1 P18 P23 SELECT START Battery Installation P19 L2 R2 P22 P20 VOLUME P21 MUTE M1 M11 PIX Before attempting to operate your Remote Control,
Inhaltszusammenfassung zur Seite Nr. 10
REMOTE CONTROL FUNCTIONS The remote control is divided into two sections, Dark Gray buttons on the top, which control the built-in PlayStaion2 and Light Gray buttons on the bottom of the remote control, that control the other functions of the unit. PLAYSTATION CONTROLS (P1-P36) (Dark Gray Buttons) NOTE: PlayStation2 controls (refer to the SONY PlayStation2 manual for details). P1. OPEN/CLOSE Not used on this model. P2. AUDIO Displays and changes DVD audio options. P3. SHUFFLE Starts playback of
Inhaltszusammenfassung zur Seite Nr. 11
P8. SLOW ( / ) Changes to slow-motion playback. (Forward or Reverse) P9. SCAN ( / ) Fast forwards or fast reverses playback on the screen to locate a particular scene. P10. PLAY Starts playback. P11. DISPLAY Displays the Control Panel of the PlayStation2. P12. TOP MENU Displays the disc menu of DVD-Video discs. The content varies from disc to disc. P13. BUTTON: DVD MENU Selects the item to be changed. P14. ENTER Executes the item selected on the DVD disc menu or the on-screen Control Panel. P15.
Inhaltszusammenfassung zur Seite Nr. 12
P18. L1 BUTTON Previous (), press to return to the previous chapter or track. P19. L2 BUTTON Search ( ) using fast reverse or fast forward playback. P20. SELECT Displays the control panel of the PlayStation2. P21 START Press to Play/Pause disc playback. P22. R2 BUTTON Search ( ) using forward playback. P23. R1 BUTTON Next () press to skip to the next chapter or track. P24. R3 BUTTON Displays Audio Options, press the language changes. P25. BUTTON: ENTER P26. BUTTON: CANCEL /(Stop) P27. MENU Di
Inhaltszusammenfassung zur Seite Nr. 13
P29. PAUSE Pauses and resumes playback. P30. STOP Stops playback. P31. PREVIOUS ( )) / NEXT ( Returns to the beginning of the current or previous chapter/Skips to the beginning of the next chapter. P32. A-B REPEAT Specifies a scene for playback and starts playback of the scene that has been set. P33. CLEAR Clears selected numbers or playback modes. P34. TIME Displays the current title or chapter number and the elapsed or remaining time. P35. NUMBER 0~9 Used to select numerical items displayed
Inhaltszusammenfassung zur Seite Nr. 14
M2. MUTE Press this button to mute the audio. Pressing the button again restores the sound to the previously set level. M3. FMM ON/OFF Turns the wireless FM Modulator ON or OFF. M4. SYSTEM MENU Allows the user to access the main system menu for picture controls, FM Modulator Select, screen mode etc. M5. FMM SELECT Selects the FM Modulator Frequency. M6. SOURCE Each time the button is pressed, the audio/video source will change: PS2, AV1 and AUX. M7. IR ON/OFF Turns the Infrared Transmitter power
Inhaltszusammenfassung zur Seite Nr. 15
WIRELESS CONTROLLER (2.4GHz) Carefully read the information before use. For detailed connection and usage methods, refer to the Owner’s Manual for the PIayStation2 system. HOW TO USE Battery Installation: The wireless controller uses two “AA” batteries. 1. Turn your controller upside down and remove the lid on the bottom by pressing against the lip and pulling the lid away. 2. Insert the batteries as indicated in the controller. 3. Once the batteries are inserted, put the lid back in its place a
Inhaltszusammenfassung zur Seite Nr. 16
Sleep Mode: START button Your controller will automatically go into Sleep Mode after approximately three minutes if not used. The MODE LED indicator will go off. To reactivate the controller, you have a choice to press the START button or press down on one of the joy sticks on the controller. Your controller will automatically synchronize with the receiver in the PS 2 unit. Turning Off the Controller: Place the ON/OFF switch on the controller to OFF if it will not be used for a long period of ti
Inhaltszusammenfassung zur Seite Nr. 17
SYSTEM MENU ADJUSTMENT The System Menu contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) Press the MENU/ENTER button on unit to enter System Menu, the main page of the system menu will appear on screen. 2) Use the cursor buttons or to select the desired item in the main page and press the MENU/ENTER button to select. (Items selected in the menu will have a green background) 3) The sub menu will appear on scre
Inhaltszusammenfassung zur Seite Nr. 18
4) Use light gray or buttons to change the picture control setting. 5) To change another picture control setting press the SYSTEM MENU button and select another picture control using the light gray or buttons. Repeat step 4 to change the picture control setting. 6) To reset the picture control settings to the factory default settings, enter the picture control menu and use the light gray button to highlight RESET and press the light gray ENTER button. NOTE: The light gray PIX control and l
Inhaltszusammenfassung zur Seite Nr. 19
3) Press the light gray ENTER button on the remote control and the following screen will appear: FMM FMM ON FMM OFF FMM SELECT 4) Use the light gray (up) or (down) arrow on the remote control to highlight FMM ON and press the light gray ENTER button to turn the FM Modulator on. FMM SELECT 1) Repeat steps 1 through 3 above and highlight FMM SELECT 2) Use the light gray (down) arrow on the remote control to highlight FMM SELECT and press the ENTER button, the following screen will appear. FMM S
Inhaltszusammenfassung zur Seite Nr. 20
OSD LANGUAGE This allows the user to select the language for the on-screen display. The user can either select English, Spanish, French, German for the OSD language. SYSTEM MENU OSD LANGUAGE ENGLISH PICTURE CONTROL FMM SPANISH OSD LANGUAGE FRENCH SOURCE DEFAULT PS2 GERMAN SCREEN MODE SOURCE DEFAULT PS2 This allows the user to set the system default source to PS2 (via System Menu). NOTE: If selected default source is set to PS2 every time the unit’s power is cycled with the source set to someth
