Inhaltszusammenfassung zur Seite Nr. 1
Multi-functional
SourceUnit
A3351/A3451
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Inhaltszusammenfassung zur Seite Nr. 4
GettingStarted
Inhaltszusammenfassung zur Seite Nr. 5
TableofContents Table of Contents 3-5 Warning 6-7 WARNING CAUTION PRECAUTION BasicOperation 8-14 Detaching / Attaching the Front Panel Initial System Start-up (Reset) Turning Power On and Off Selecting Source Adjustment: Bass / Treble / Balance / Fader Subwoofer Level / Subwoofer Freq / EQ Curve / Volume Adjusting the Built-in A-Bass Adjusting Source Level Clock Display CD 15-19 Opening and Closing the Movable Display Playback Usable disc Ejecting CD Track Up and Down Fast Forward and Backward P
Inhaltszusammenfassung zur Seite Nr. 6
TableofContents MP3/(A3451only) 20-25 Playing MP3 Files Changing Display Folder Selection Order of Playing Tracks File up and Down Pause File Repeat Play Folder Repeat Play Random Play Intro Scan Play Direct Track Access Mode Direct Filer Access Mode Wildcard Search Mode About the Usable Discs About MP3 Tuner 26-27 Changing Display Manual Tuning Auto Seek Tuning Preset Tuning Station Preset Memory Automatic Seek and Preset Memory Mode (Auto Store) Programmable Station Name Memory Programming St
Inhaltszusammenfassung zur Seite Nr. 7
ControlsandFunctions Changer 30-31 CD Changer Control Playback Next/Previous Track Fast Forward and Backward Pause Repeat Play Random Play Disc Selection Disc Scan Disc Repeat Play DVD Changer Control Disc Selection Next/Previous Track Fast Forward and Backward SetupOperation 32-34 Beep Guide Changing Lighting Color Adjusting Display Brightness Changing Source Type Local/DX Seek RDS Regional Setting TA Volume Level RDS Type Changing Security Code Installation 35-36 Procedure Connection Troublesh
Inhaltszusammenfassung zur Seite Nr. 8
Warning WARNING To prevent injury or fire, take the following precautions; Insert the unit all the way in until it is fully locked in place, otherwise it may fall out of place when jolted. When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a0.75mm 2(AWG18) or more to prevent wire deterioration and damage to the wire coating. If the unit starts to emit smoke or strange smells, turn off the power immediatelyand consult your Authorized
Inhaltszusammenfassung zur Seite Nr. 9
Warning Volume Level For your driving safety, keep the volume level low enough to be aware of road and traffic conditions and emergiency vehicles. Car Washing To avoid electrical shorts which may cause fire, or other damage, do not expose this product (including the speakers and CDs) to water or excessive moisture. Car Ventilation If your car is parked for several hours in direct sunlight, the temperature inside the car may become very high. It is advisable to drive the car and give the interior
Inhaltszusammenfassung zur Seite Nr. 10
BasicOperation [OPEN] DetachingtheFrontPanel You can detach the front panel of this unit to help deter the unit from being stolen. 1) Press and hold [Open] to cause the faceplate to slide down and forward. “Remove Panel” and then “Good bye See you again!” will be displayed Unit will turn off 2) Press the release button on the bottom front edge of the faceplate and slide the faceplate away from the unit. 3) The faceplate bracket will automatically close after 5 seconds. Fig. 1.2 Detaching the Fro
Inhaltszusammenfassung zur Seite Nr. 11
BasicOperation Note The faceplate bracket will automatically close after 10 seconds even though the faceplate is not detached. When the faceplate slides down, the unit will turn on if the user presses any buttonexcept [OPEN] or [EJECT]. AttachingtheFrontPanel Make sure that the faceplate bracket is in the closed position. Press the faceplate against the front of the unit until it clicks into place. NOTE: To protect the front panel, place it in the supplied carrying case when you leave the car CA
Inhaltszusammenfassung zur Seite Nr. 12
BasicOperation Use the following instructions (Fig.1.2)to detach the faceplate. Press the RESET button (Fig. 1.3) with a ballpoint pen or a paper clip in the hole at the lower left corner of the unit and gently press it in until the button clicks.“Audiobahn Car Audio System” appears on the display and then “Security Code:” with ablinking cursor. Input the Security Code on Product ID card by turning the Rotary Encoder to choose the number of the digit at the cursor position. Press the [>>l] butto
Inhaltszusammenfassung zur Seite Nr. 13
BasicOperations The source will be changed according to the following order: . >TUNER > DISC > (CHANGER) > AUX Tuner mode (See page 26) CD mode (See page 14) AUX mode Note: CHANGER mode is only available if a CD/DVD Changer is connected. For Satellite Broadcasting, set to AUX mode. Volume Turn the Rotary Encoder to adjust the volume level. Default : 35 Setting Range : 0 to 80 (1dB per step) Note: “MUTE” is displayed if the volume is set to 0. SelectingAdjustmentmodes 1) Press the [SEL] repeatedl
Inhaltszusammenfassung zur Seite Nr. 14
BasicOperation Treble Turn the treble level up / down Default : 0 Setting Range : -7 to +7 (1.7dB per step) Balance You can adjust the sound balance between the right and left speakers. Default : C00(Center)Setting Range : 15 Levels each(1dB per step) Fader You can adjust the sound balance between the front and rear speakers Default : C00(Center)Setting Range : 15 levels each SubwooferLevel You can adjust the Subwoofer level from 0 dB to 20dB gain. Default : 0 Setting Range : 0 to +20 (5dB per s
Inhaltszusammenfassung zur Seite Nr. 15
BasicOperation Figure 1.4 Characteristics of A-Bass AdjustingA-Bass 1) Press the [A-BASS] button repeatedly until the desired bass level (1,2 or 3) appears in the display. 2) To cancel, select “A-Bass OFF”. AdjustingSourceLevel If the difference in volume level of CD, CHANGER(CD/DVD), AUX and TUNER is too much, you can compensate the volume by adjusting each source level. First, set the desired volume level for the TUNER mode, then adjust the volume level of each source. 1) Select TUNER mode and
Inhaltszusammenfassung zur Seite Nr. 16
BasicOperation ClockDisplay Press the [ENTER] button to see clock time. Clock Display mode will be released automatically after 5 seconds. Setting Clock time 1) Press and hold [DISP] for a second to set the clock time. 2) “CLOCK SET” will be displayed and the clock time will be displayed. 3) Turn the rotary encoder to set the hour. Press the [>>|] button and turn the rotary encoder to set minutes. Press the [|<<] button again and turn the rotary encoder to again set the hours. Press the [ENTER]
Inhaltszusammenfassung zur Seite Nr. 17
CD OpeningandClosingtheMovabledisplay Press the [OPEN] button and the detachable display will open. Press the [OPEN] button again to close the detachable display. Note: Do not apply resistance to the moveable display when it is open as it may result in malfunction of the unit CAUTION Keep hands (or any other objects) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a m
Inhaltszusammenfassung zur Seite Nr. 18
CD Do not affix temporary stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. EjectingCD To eject a disc when it is being played, press[ ] button. [DISP] [4,PAUSE] [3,RDM] [2,RPT] [DTA] [BAND/MENU] [1,SCN] [ENTER]
Inhaltszusammenfassung zur Seite Nr. 19
CD Fastforwardandbackward Press and hold the [l<<] , [>>l] button to move backward or forward and release to resume the playback. Pause To pause playback, press the [4, PAUSE] button. Press the [4, PAUSE] button again to resume playback. RepeatPlay Press the [2,RPT] button to repeatedlyplaythecurrenttrack. Press the [2, RPT] button again to deactivate the repeat play. NOTE: The CD will be automatically repeated played back when the end of the disc is reached. RandomPlay Press the [3, RDM] button
Inhaltszusammenfassung zur Seite Nr. 20
CD The Intro SCAN mode will be released when the [2, RPT] or the [3, RDM] button is pressed. The current track will be Repeated or Randomly played correspondingly. The Intro SCAN mode will be also released when [|<<] or [>>|] button is pressed.The beginning of the current track or next track will be played correspondingly. DirectTrackAccessMode 1) Press the [DTA] button to change to the Direct Track Access Mode. 2) Turn the Rotary Encoder or use the [|<<] and [>>|] button until you reached the d
