Inhaltszusammenfassung zur Seite Nr. 1
Instructions CD RECEIVER KD-A815/KD-R810
ENGLISH
ESPAÑOL
FRANÇAIS
KD-A815/KD-R810
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,
We can help you!
consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la p
Inhaltszusammenfassung zur Seite Nr. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing a JVC product. How to read this manual Please read all instructions carefully before The following icons/symbols are used to operation, to ensure your complete indicate: understanding and to obtain the best possible Press and hold the button(s) performance from the unit. [Hold] until the desired operation begins. CONTENTS Turn the control dial. 3 How to read this manual 3 How to attach/detach the control Turn the control dial panel to make a selection, 3 How to
Inhaltszusammenfassung zur Seite Nr. 4
Canceling the display demonstration 1 Turn on the power. 4 Select . DEMO Off On SET UP 2 DEMO [Hold] 5 Finish the procedure. Clock PRO EQ (Initial setting) 3 Select . DEMO Off On Setting the clock 1 Turn on the power. 7 Select <24H/12H>. Clock Set Clock 24H/12H Clock Adjust SET UP 2 DEMO [Hold] 8 Select <24Hours> or <12Hours>. Clock PRO EQ 24H/12H (Initial setting) 24Hours 12Hours 3 Select . SET UP DEMO 9 Finish the procedure. Clock PRO EQ 4 Select . Clock
Inhaltszusammenfassung zur Seite Nr. 5
Preparing the remote controller (RM-RK50) When you use the remote controller for the first Warning (to prevent accidents and time, pull out the insulation sheet. damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Insulation sheet • Store the battery in a place where children For USA-California Only: cannot reach. This product contains a CR Coin Cell Lithi
Inhaltszusammenfassung zur Seite Nr. 6
Basic operations Ejects the disc Loading slot Display window USB (Universal Serial Bus) input terminal Detaches the panel Control dial Auxiliary input Remote sensor jack • DO NOT expose to bright sunlight. When you press or hold the following button(s)... Remote Main unit General operation controller Turns on. • When the power is on, pressing /I/ATT on the remote controller also mutes the sound or pauses. Press /I/ATT again to cancel muting or resume playback. Turns off if pressed and held.
Inhaltszusammenfassung zur Seite Nr. 7
Remote Main unit General operation controller Selects the sound mode. • Enters tone level adjustment directly ( 28 ) if pressed and held EQ/BASS-TRE on the main unit. • Enters “Call Menu” screen * or answers incoming call when the unit rings. • Ends a call if pressed and held after a phone call conversation. — • Switches the connected mobile phone to the last connected mobile phone if pressed and held. ( 18 ) * If there is no call list, the unit beeps. • Returns to the previous menu. — • S
Inhaltszusammenfassung zur Seite Nr. 8
Listening to the radio ~ Ÿ ] “FM” or “AM” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search Automatic presetting (FM)— “M” appears, then press SSM (Strong-station Sequential Memory) the button repeatedly. You can preset up to 18 stations for FM. [Hold] While listening to a station... When an FM stereo broadcast is 1 [Hold] hard to receive 2 1 [Hold] ] ] ] 2 ] ] ] “SSM” a
Inhaltszusammenfassung zur Seite Nr. 9
Manual presetting (FM/AM) Title assignment You can preset up to 18 stations for FM and 6 You can assign titles up to 30 station stations for AM. frequencies (FM and AM) using 8 characters (maximum) for each title. Ex.: Storing FM station of 92.50 MHz into preset • If you try to assign titles to more than 30 number “4.” station frequencies, “Name Full” appears. 1 Delete unwanted titles before assignment. • When HD Radio tuner box is connected ( 21 ), this feature will be disabled. ] “92.50
Inhaltszusammenfassung zur Seite Nr. 10
Listening to a disc ~ Ÿ ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Selecting a folder/track on the the disc list “No Disc” appears. While listening to a disc.... Remove the disc, then press 1 / SOURCE to listen to another playback source. ] Enter the list menu. Prohibiting disc ejection 2 [Hold] ] Select your desired item. To cancel the prohibition, repeat the same MP3/WMA: Select your desired fold
Inhaltszusammenfassung zur Seite Nr. 11
3 Turn the control dial to select your desired 3 track. Then press the control dial to confirm. • Only the existing characters will be shown on Repeat the search menu. Track : Repeats current track • Press and hold 5/∞ to continuously change Folder : Repeats current folder the character of the search menu. • If your disc contains many tracks, searching Random take some time. Folder : Randomly plays all tracks of current folder, then tracks of Selecting the playback modes next folders All :
Inhaltszusammenfassung zur Seite Nr. 12
] Turn on the power. ~ USB cable from the USB input Ÿ rear of the unit terminal and / or USB memory All tracks will be played repeatedly until you change the source or detach the USB device. If you have turned off the power (without • Do not start the car engine if a USB device is detaching the USB device)... connected. Pressing / SOURCE turns on the power and • This unit may not be able to play the files playback starts from where it has been stopped depending on the type of USB device.
Inhaltszusammenfassung zur Seite Nr. 13
Using the Bluetooth ® device Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other. • Refer to page 4 of the Installation/Connection Manual (separate volume) to check the countries where you may use the Bluetooth® function. Bluetooth profile This unit supports the following Bluetooth profiles; HFP (Hands-Free Profile
Inhaltszusammenfassung zur Seite Nr. 14
Pairing a device Use the Bluetooth device to search. 6 When you connect a Bluetooth device to the On the device to be connected, enter unit for the first time, make pairing between the same PIN code you have just the unit and the device. entered for this unit. • Once the connection is established, it is “Pairing OK“ appears for a while, then registered in the unit even if you reset the “Connect Now Using Phone” appears. unit. Up to five devices can be registered in Phone icon appears when Bl
Inhaltszusammenfassung zur Seite Nr. 15
Deleting a registered device 3 1 [Hold] ] Select a device you want to connect. • “Connecting...” appears, then 2 “Connected [Device Name]” appears on the display when the device is connected. ] ] 3 Using a Bluetooth mobile phone ] Select a device you want to delete. “Delete OK?” appears on the display. Making a call 4 1 ] Delete the selection. ] Enter “Call Menu” screen. “OK” appears when the device is deleted. 2 • To return to the previous menu, press BACK. ] S
Inhaltszusammenfassung zur Seite Nr. 16
How to enter phone number 2 • Phonebook * : Shows the name/ 1 Turn the control dial to select a number. phone number of the phonebook 2 Press 4 /¢ to move the entry registered in the unit or from the 3 position. connected phone * . Go to the 3 Repeat steps 1 and 2 until you finish following step. entering the phone number. – To copy the phonebook memory, 4 Press the control dial to confirm the entry. , 20. – If the phonebook contains many numbers, you can fast search
Inhaltszusammenfassung zur Seite Nr. 17
Receiving/ending a phone call 3 When a call comes in, the source is automatically changed to “BT FRONT/BT REAR.” “Receiving... [Phone number/name]” appears on the display. ] Show the search menu (A to Z, 0 to • The display will flash in blue. (, 9, and OTHERS). 30) The first character of the first contact on the phonebook appears. When is activated.... • “OTHERS” appears if the 1st character The unit answers the incoming calls is not A to Z or 0 to 9, such as #
Inhaltszusammenfassung zur Seite Nr. 18
Switching the connected mobile phone Using a Bluetooth audio You can switch the current connected mobile player phone to the last connected mobile phone. Operations and display indications differ [Hold] depending on their availability on the connected device. Phone icon appears and “Connecting” flashes on the display. When the last connected ] Select “BT FRONT” or phone is being reconnected again, “Connected “BT REAR.” [Device Name]” appears on the display. Now • If playback does not
Inhaltszusammenfassung zur Seite Nr. 19
Selecting the playback modes Warning messages • For Bluetooth devices that support AVRCP 1.3. Connection Error The device is registered but the connection 1 has failed. Use to connect the device again. ( 15) 2 Error Try the operation again. If “Error” appears again, check if the device supports the ] “Repeat” j “Random” function you have tried. 3 Please Wait... The unit is preparing to use the Bluetooth function. If the message does not disappear,
Inhaltszusammenfassung zur Seite Nr. 20
Setting item Selectable setting, [ Initial: Underlined ] Auto Connect • Last : The connection is established automatically with the last connected Bluetooth device when you turn on the unit. • Off : The unit does not connect the Bluetooth device automatically. Connect the device manually. ( 15) Auto Answer • On : The unit answers the incoming calls automatically. • Off : The unit does not answer the calls automatically. Answer the calls manually. ( 17) Message • On : The unit informs you of
