Inhaltszusammenfassung zur Seite Nr. 1
USER MANUAL
EFA9620
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
electrolux 3 EN RECOMMENDATIONS AND SUGGE- STIONS 6 CHARACTERISTICS 7 USE 12 MAINTENANCE 14 IT
Inhaltszusammenfassung zur Seite Nr. 4
4 electrolux EN Welcome to the world of Electrolux Thank you for choosing a fi rst class product from Electrolux, which hopeful- ly will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality prod- ucts that make your life more comfort- able. You fi nd some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefi ts of your new machine. We promise that it will pr
Inhaltszusammenfassung zur Seite Nr. 5
electrolux 5
Inhaltszusammenfassung zur Seite Nr. 6
6 electrolux Recommendations and Suggestions RECOMMENDATIONS AND SUGGESTIONS Installation • Adjust the fl ame intensity to direct it onto the bottom of the pan only, mak- • The manufacturer will not be held li- ing sure that it does not engulf the able for any damages resulting from sides. EN incorrect or improper installation. • Deep fat fryers must be continuously • The minimum safety distance be- monitored during use: overheated oil tween the cooker top and the extrac- can burst into fl am
Inhaltszusammenfassung zur Seite Nr. 7
Characteristics electrolux 7 CHARACTERISTICS Dimensions EN
Inhaltszusammenfassung zur Seite Nr. 8
8 electrolux Characteristics Components Ref. Q.ty Product Components 1 1 Hood Body, complete with: Con- EN trols, Light, Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 7.1 1 Telescopic frame complete with extractor, consisting of: 7.1a 1 Upper frame 7.1b 1 Lower frame 9 1 Reducer Flange ø 150-120 mm 10 1 Flange ø 150 15 1 Air Outlet Connection 24 1 Junction box 25 2 Pipe clamps Ref. Q.ty Installation
Inhaltszusammenfassung zur Seite Nr. 9
Installation electrolux 9 INSTALLATION Drilling the Ceiling/shelf • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. EN • Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. • Mark the centres of the holes in the template. • Drill the holes at the points marked: • for concrete ceilings, drill for plugs appropriate to the screw
Inhaltszusammenfassung zur Seite Nr. 10
10 electrolux Installation Fixing the frame • Loosen the two screws fastening the lower chimney and remove this from the lower frame. EN • Loosen the two screws fastening the upper chimney and remove this from the upper frame. If you wish to adjust the height of the frame, proceed as follows: • Unfasten the eight metric screws join- ing the two columns, located at the sides of the frame. • Adjust the frame to the height re- quired, then replace all the screws removed as above. • Inser
Inhaltszusammenfassung zur Seite Nr. 11
Installation electrolux 11 Connection in Ducting Version When installing the ducting version, connect the hood to the chimney using either a fl exible or rigid pipe ø 150 or EN 120 mm, the choice of which is left to the installer. • To install a ø 120 mm air exhaust con- nection, insert the reducer fl ange 9 on the hood body outlet. • Fix the pipe using the pipe clamps 25 provided. • Remove charcoal fi lters, if present. Connection in Recycling Version • Fix the connectio
Inhaltszusammenfassung zur Seite Nr. 12
12 electrolux Installation / Use Electrical Connection • Connect the hood to the mains through a two-pole switch having a EN contact gap of at least 3 mm. • Remove the grease fi lters (see para- graph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan. • Connect the control connector Cmd. • Connect the lights connector Lux. • Place the connectors in the junction box 24 and close it using the 2 screws
Inhaltszusammenfassung zur Seite Nr. 13
Use electrolux 13 Touch Basic functions Indicator lights control Dual Function When briefl y pressed it switches the lighting Touch control Lights off L system on and off. unlit When pressed for 2 seconds it starts the Touch control lit Lights on lighting system in “courtesy light” mode. EN The lamps are fed at a reduced power of approximately 5W. Such function can be Touch control Courtesy light on stopped by pressing the touch control for 2 unlit seconds or just by pressing it shortly in o
Inhaltszusammenfassung zur Seite Nr. 14
14 electrolux Maintenance MAINTENANCE Cleaning the Comfort Panels Cleaning of the Metal Cassette Filters • Pull the Comfort Panel to open it. • Disconnect the panel from the hood Alarm reset EN canopy by sliding the fi xing pin lever. • Stop the motor. • The comfort panel must never be • Press the F -touch control for at least washed in a dishwasher. 4 seconds until the T1 -touch control • Clean the outside using a damp cloth fl ashes. and neutral liquid detergent. Cleaning the fi lters • C
Inhaltszusammenfassung zur Seite Nr. 15
Maintenance electrolux 15 Reset the alarm signal Replacing the Charcoal Filter • Stop the motor. This fi lter cannot be washed or regene- • Press the touch control F for at least rated, and must be replaced when the F 4 seconds, until the touch control T1 touch control starts to fl ash, or at least EN fl ashes. once every 4 months. The alarm is only triggered when the motor is on. Replace the Filter Enabling/Disabling the alarm signal • Pull the Comfort Panel to open it. • In Recirculation Vers
Inhaltszusammenfassung zur Seite Nr. 16
16 electrolux
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
www.electrolux.com 436003562_03 - 070130
