Inhaltszusammenfassung zur Seite Nr. 1
VIDEO CASSETTE
OWNER’S MANUAL
If you need additional operating
RECORDER
assistance after reading this owner's
manual or to order replacement
accessories, please call TOLL FREE :
1-800-968-3429. Or visit our web site
SSV6003
at http://www.funai-corp.com
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
WARNING:
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within
CAUTION
an equilateral triangle, is intended to alert the user
to the presence of un
Inhaltszusammenfassung zur Seite Nr. 2
REC REC F.FWD TIMER TIMER PLAY PRECAUTIONS Install Location Important Copyright Information For safety and optimum performance of your VCR: Unauthorized recording or use of broadcast television programming, • Install the VCR in a horizontal and stable position. Do not place video tape, film or other copyrighted material may violate applicable anything directly on top of the VCR. Do not place the VCR directly copyright laws. We assume no responsibility for the unauthorized on top of the TV. dupli
Inhaltszusammenfassung zur Seite Nr. 3
IN OUT PREPARATION FOR USE SETUP Connecting to a TV without A/V Terminals Automatic Channel Set Up Disconnect the AC power cord of the TV from the AC You can automatically program the tuner to scan only the chan- nels you receive in your area. 1 outlet. • Channel memory programming is NOT needed when you con- Disconnect the antenna or cable from the TV. nect the VCR to a cable box or satellite box as in "Connect VCR 2 to TV Connection". In this case, select the VCR and TV to chan- Connect the an
Inhaltszusammenfassung zur Seite Nr. 4
To Add/Delete Channels PLAYBACK FUNCTION When the VCR automatically program the tuner to scan only the Normal Playback channels you receive in your area, some channels may be skipped due to weak signal. You can manually add the channel Insert the prerecorded tape. The VCR will in the VCR memory. 1 turn on. If the safety tab has been removed, - MENU - Press [MENU] until the main menu the VCR will start playback automatically. TIMER PROGRAMMING [OFF] AUTO REPEAT 1 appears. CHANNEL SET UP CLOCK SET
Inhaltszusammenfassung zur Seite Nr. 5
Index Search OTR (One Touch Recording) An index mark will be assigned at the beginning of each record- This feature allows you to set the recording length simply by ings you make. You may skip to a specific marked point by fol- pressing [REC/OTR] on the VCR. lowing the steps below. Begin OTR by pressing [REC/OTR] on the VCR repeat- Press [SEARCH-MODE] so that the Index Search menu 1 edly until the desired recording length appears. 1 appears. REC OTR(0:30) OTR(1
Inhaltszusammenfassung zur Seite Nr. 6
• For best results during dubbing, use the VCR’s front panel Hints for Timer Recording controls whenever possible. The remote control might affect • If there is a power failure or the VCR is unplugged for more the playing VCR’s operation. than 30 seconds, the clock setting and all timer settings will be • Always use video-quality shielded cables with RCA-type con- lost. nectors. Standard audio cables are not recommended. • If the tape runs out before the end time, the VCR will switch to • You ca
Inhaltszusammenfassung zur Seite Nr. 7
TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power. • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. Timer recording is impossible. • Make sure the timer recording is set correctly. • Make sure the power is off. • Make sure the
Inhaltszusammenfassung zur Seite Nr. 8
CONTROLES DE FUNCIONAMIENTO Y FUNCIONES Panel frontal Indicadores Mando a distancia 1. Compartimiento del videocasete 14. Indicador de alimentación 1. Botón de expulsión (EJECT) 2. Botones de número (NUMBER) 2. Botón de avance rápido 15. Indicador de videograbadora/televisor 3. Botón de reproducción 16. Indicador de videocasete introducido 3. Botón de menús (MENU) 4. Botón de rebobinado 17. Indicador del temporizador 4. Botón de grabación (RECORD) 18. Indicador de grabación 5. Botón de velocida
