Inhaltszusammenfassung zur Seite Nr. 1
SR-V101US.fm Page 1 Friday, December 26, 2003 2:24 PM
VIDEO CASSETTE RECORDER
SR-V101US
INSTRUCTIONS
REW FF
24HR QUICK
REC LINK PROGRAM
POWER
INSERT A.DUB
S-VIDEO
LPT0887-001A
WARNING:
Dear Customer,
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
Thank you for purchasing the JVC S-VHS video cassette
THIS UNIT TO RAIN OR MOISTURE.
recorder. Before use, please read the safety information and
precautions to ensure safe use of your new VCR.
CAUTION:
This video cassette recorder should be used
Inhaltszusammenfassung zur Seite Nr. 2
SR-V101US.fm Page 2 Saturday, December 27, 2003 9:40 AM NOTE: IMPORTANT PRODUCT SAFETY Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. INSTRUCTIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Electrical energy can perform many useful functions. But improper Rules. These limits are designed to provide reasonable use can result in potential electrical
Inhaltszusammenfassung zur Seite Nr. 3
SR-V101US.fm Page 3 Friday, December 26, 2003 2:24 PM 3. Power Lines c. If the product has been exposed to rain or water. An outside antenna d. If the product does not operate normally by following the system should not be operating instructions. Adjust only those controls that are located in the vicinity of covered by the operating instructions as an improper overhead power lines or adjustment of other controls may result in damage and will other electric light or often require extensive
Inhaltszusammenfassung zur Seite Nr. 4
SR-V101US.fm Page 4 Friday, December 26, 2003 2:24 PM CONTENTS Other Functions.......................................................................... 17 Timer warning display.......................................................... 17 Buttons, Connectors and Indicators ................................................ 5 Checking tape position ........................................................ 17 Changing display information.............................................. 17 Connection
Inhaltszusammenfassung zur Seite Nr. 5
SR-V101US.fm Page 5 Friday, December 26, 2003 2:24 PM Buttons, Connectors and Indicators Front Panel Cassette loading slot Advanced JOG dial REW FF 24HR QUICK REC LINK PROGRAM POWER INSERT A.DUB S-VIDEO S-VIDEO VIDEO/AUDIO input Remote input connectors sensor connector Display panel Start Time/Mode Stop Time/Mode Lock indicator Lock indicator S-VHS TBC VCR mode indicator indicator indicator Timer mode indicator Play indicator REC LINK indicator Record indicator Channel and auxiliary inp
Inhaltszusammenfassung zur Seite Nr. 6
SR-V101US.fm Page 6 Friday, December 26, 2003 2:24 PM Remote On-screen display If you press OSD (OK) on the Remote when “ON SCREEN (REC) and ON SCREEN (PLAY)” are set to “ON” ( pg. 18), you can see the current VCR status on the TV screen. The indications are not recorded even if the VCR is in the recording mode. VCR operation Channel and Timer warning display auxiliary input mode Number keys Day and clock time Tape speed STEREO Cassette mark program indication Tape position SAP indicatio
Inhaltszusammenfassung zur Seite Nr. 7
SR-V101US.fm Page 7 Monday, December 29, 2003 10:19 AM . S-video Connection Connections and Plug&Play (allows you to make the most of the S-VHS picture performance.) Setting If your TV is equipped with a S-video input connector A Perform “RF Connection” previously described. A Check contents B Connect the supplied S-video cable between the S-VIDEO Make sure the package contains all of the accessories listed in OUT connector on the rear of the VCR and the S-video input “Specifications” (
Inhaltszusammenfassung zur Seite Nr. 8
SR-V101US.fm Page 8 Friday, December 26, 2003 4:20 PM E Select D.S.T. mode Initial Settings Press OK or SHUTTLE PLUS e to move the highlight bar to “D.S.T.”, then press SHUTTLE PLUS rt repeatedly until the desired setting is selected. Clock Setting AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time enables automatic Turn on the VCR and TV, and select the VCR channel (or AV adjustment of the VCR’s clo
Inhaltszusammenfassung zur Seite Nr. 9
SR-V101US.fm Page 9 Friday, December 26, 2003 2:45 PM Setting channels manually Tuner Setting — Manual Channel Set Turn on the VCR and TV, and select the VCR channel (or AV You can add the channels you want or delete the channels you do mode). not want manually. A Access Main Menu screen, then Tuner Set screen Press MENU on the Remote. Press SHUTTLE PLUS rt to move the highlight bar (arrow) to “TUNER SET”, then press OK or SHUTTLE PLUS e. B Access Manual Channel Set screen Number keys P
Inhaltszusammenfassung zur Seite Nr. 10
) d h s r c p a r e w t a s r e o 5 s F ( l a y m a r l o P N ) n s p o w i e t o t l o s S m 2 ( SR-V101US.fm Page 10 Saturday, January 3, 2004 9:19 AM Playback Basic Playback Turn on the VCR and TV, and select the VCR channel (or AV mode). A Load a cassette Make sure the window side REW FF 24HR QUICK REC LINK PROGRAM is up, the rear label side is POWER INSERT A.DUB S-VIDEO facing you and the arrow on the front of the cassette is pointing towards the VCR. ● Do not apply too much pressure
Inhaltszusammenfassung zur Seite Nr. 11
SR-V101US.fm Page 11 Friday, December 26, 2003 2:24 PM ● To select the returning point (recording end or tape end), see Playback Features “REC END RETURN” on page 19. Turn on the VCR and TV, and select the VCR channel (or AV To prohibit operations during Repeat Play (Mode Lock) mode). Press and hold OK on the Remote for more than 5 seconds. “ ” and “ ” light up on the front display panel. The entire recording or entire tape will be played back repeatedly without Adjusting tracking cond
Inhaltszusammenfassung zur Seite Nr. 12
SR-V101US.fm Page 12 Friday, December 26, 2003 2:24 PM Recording Features Recording Turn on the VCR and TV, and select the VCR channel (or AV It may be unlawful to record or play back copyrighted material mode). without the consent of the copyright owner. Accidental erasure prevention To prevent accidental recording on a Recording on one tape repeatedly recorded cassette, remove its record — Repeat Recording safety tab and set “REC SAFETY” to “ON” ( pg. 19). To record on it later, Recor
Inhaltszusammenfassung zur Seite Nr. 13
SR-V101US.fm Page 13 Friday, December 26, 2003 2:24 PM S-VHS (Super VHS), S-VHS ET or VHS Recording Series Playback and Recording Mode This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS. ● To record in S-VHS: Series Playback Set “S-VHS MODE” to “ON” ( pg. 19). Then, insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the display panel. The S-VHS recording mode is selected. To REMOTE OUT ● To record in S-VHS ET on a VHS cassette: Set “S-VHS ET” to “ON” ( pg. 19). The
Inhaltszusammenfassung zur Seite Nr. 14
SR-V101US.fm Page 14 Friday, December 26, 2003 2:24 PM A Make connections Series Recording Connect two sets of SR-V101US and a TV using AV cables as shown in the illustration. ● The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 or Another VCR Camcorder mm mini-plug connector. ● When playing back S-VHS recordings, it is recommended to use To S Video To Audio/Video Output the S-VIDEO connection to minimize picture degradation. Output Audio/Video Cable (Not supplied) B Turn on all c
Inhaltszusammenfassung zur Seite Nr. 15
SR-V101US.fm Page 15 Friday, December 26, 2003 2:24 PM A Make connections Connect two sets of SR-V101US to other equipment, antenna or Timer Recording cable as shown in the illustration. ● The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 Up to 8 timer recording programs can be made using VCR Plus+ mm mini-plug connector. timer programing, Express timer programing or 24HR Quick ● When connecting a camcorder or another VCR with an Programing method as far as a year in advance. Re
Inhaltszusammenfassung zur Seite Nr. 16
SR-V101US.fm Page 16 Monday, December 29, 2003 2:04 PM ® ● To set the tape speed, press SP/EP. VCR Plus+ Timer Programing ● To timer-record daily (Sunday– PROGRAM 1 The PlusCode programing numbers are Saturday) or weekly serials, press START STOP the numbers next to the program in 8:00AM 9:00AM DAILY (Number key “8”) or WEEKLY DATE CH most TV listing. 12/24/04 110 SP (Number key “9”). Pressing the FRI Load a cassette with the record safety button again makes the “DAILY” or PRESS (+/–
Inhaltszusammenfassung zur Seite Nr. 17
SR-V101US.fm Page 17 Friday, December 26, 2003 2:24 PM Checking, Canceling or Changing Program Other Functions Settings Timer warning display A Disengage timer –WARNING– A warning appears on the TV screen to tell Press TIMER, then press POWER 1. TIMER RECORDING TO START SOON you that the timer-recording is to start in ● When “AUTO TIMER” is set to “ON” ( pg. 18), you do not (CANCEL) 5 minutes if you are not in the timer have to press TIMER. recording standby mode at
Inhaltszusammenfassung zur Seite Nr. 18
SR-V101US.fm Page 18 Friday, December 26, 2003 2:24 PM NOTE: DIGITAL TBC/NR — ON/OFF The setting you have made is kept in memory. Even if the VCR is Your VCR is equipped with a Digital TBC (Time Base Corrector) unplugged or the power failure occurs, it will resume every time that removes jitter from fluctuating video signals to deliver a stable you turn on the VCR. picture even with old tapes and rental cassettes. The on/off of Digital — DNR (Noise Reduction) which cuts noise and enabl
Inhaltszusammenfassung zur Seite Nr. 19
SR-V101US.fm Page 19 Friday, December 26, 2003 2:24 PM NOTES: 2ND AUDIO RECORD — ON/OFF ● Before recording, set “VIDEO CALIBRATION” to “ON”. ● When this function is set to “ON”; ( pg. 18) If a SAP program is received, the SAP audio is recorded on both ● You cannot activate the S-VHS ET function while recording the normal and Hi-Fi tracks. The main audio is not recorded. ( pg. 12), timer-recording ( pg. 15) or the “VIDEO If a non-SAP program is received, the main audio is recorded on
Inhaltszusammenfassung zur Seite Nr. 20
SR-V101US.fm Page 20 Friday, December 26, 2003 2:24 PM Satellite Auto Recording Child Lock You can automatically record a satellite program which is timer- You can disable the VCR operations. programed on your DBS receiver. Turn on the VCR and TV, and select the VCR channel (or AV Turn on the VCR and TV, and select the VCR channel (or AV mode). mode). REW FF 24HR QUICK REC LINK PROGRAM POWER INSERT A.DUB S-VIDEO While the VCR is turned on, press and hold POWER 1 on the Remote for more than
