Inhaltszusammenfassung zur Seite Nr. 1
T
V
–
OK
3
+
T
V
G
P
O
R
VIDEO CASSETTE RECORDER
CONTENTS
SAFETY FIRST 2
Safety Precautions ...................... 2
Some Do's And Don'ts ............... 3
HR-J465EK QUICK SET UP GUIDE 4
CHECK THE CONTENTS ........... 4
INSTALLATION .......................... 5
AUTO SET UP ............................ 6
HR-J265EK
BASIC OPERATIONS 8
Playback .................................... 8
Recording ................................ 10
VIDEO Plus+ Timer
Programming ........................... 12
HR-J260EK
E
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY FIRST 2 Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION IMPORTANT n When you are not using the recorder for a long period of n time, it is recommended that you disconnect the power Please read the various precautions on p. 2 – 3 of this cord from the mains outlet. instruction manual before installing or operating the n Dan
Inhaltszusammenfassung zur Seite Nr. 3
3 Some Do's And Don'ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnec- tions between pieces of equipment) are properly made and in
Inhaltszusammenfassung zur Seite Nr. 4
T V – OK 3 + T V G P O R QUICK SET UP GUIDE 4 Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder. Please use this QUICK SET UP GUIDE to help you to set up your video cassette recorder. CHECK THE CONTENTS 1 CHECK ALL THE CONTENTS SHOWN BELOW TV TV/VCR AUDIO – –:– – DISPLAY 123 STANDBY/ON 2 45 6 TIMER VPS/PDC DAILY/QTDN. WEEKLY/HEBDO REC LINK TV PROG 7 89 AUX 0000 4 0 START STOP DATE TV Video Cassette Recorder DEBUT FIN PROG EXPRESS 1 PROG ? 30 SEC RF Cable "AA" Batteries (x
Inhaltszusammenfassung zur Seite Nr. 5
5 INSTALLATION 2 CONNECT VIDEO RECORDER TO TV Place the recorder on a stable, flat surface. Back of TV RF Cable (provided) 21-pin SCART Cable (not provided) TV Aerial Cable (not provided) Make this connection if your TV has a Aerial connector 21-pin AV input connector (SCART) in order to reduce the 21-pin AV input connector possibility of interference. (SCART) And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes. Mains Power Cord ENTREE ANT.
Inhaltszusammenfassung zur Seite Nr. 6
3 QUICK SET UP GUIDE (cont.) 6 AUTO SET UP 3 SET THE TUNER CHANNELS, CLOCK, GUIDE PROGRAM NUMBERS AND VIDEO CHANNEL* The Auto Set Up function sets the tuner channels, clock, VIDEO Plus+ assigned Guide Program numbers and the video channel* automatically the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet. * Useful if you have connected the video recorder to Before performing the following p
Inhaltszusammenfassung zur Seite Nr. 7
7 Auto Set Up results appear on the display panel When both auto channel set and auto clock set have been completed successfully the A correct current time will be displayed after the OK button is pressed in item 3 on page 6. When auto channel set has been completed successfully but auto clock set has not, "(PR)1" B will be displayed after the OK button is pressed in item 3 on page 6. When neither auto channel set nor auto clock set has been completed successfully, "– –:– –" C will be displa
Inhaltszusammenfassung zur Seite Nr. 8
FF PLAY 3 BASIC OPERATIONS 8 The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Playback LOAD A CASSETTE Turn on the TV and select the VIDEO channel (or AV mode). Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is 1 point toward the recorder. Don’t apply too much 3 pressure whe
Inhaltszusammenfassung zur Seite Nr. 9
PLAY FF TV PROG PLAY 3 9 High-Speed Search ATTENTION In the search, still, slow-motion or frame-by-frame playback mode, ACTIVATE HIGH-SPEED l the picture will be distorted. l noise bars will appear. SEARCH l there will be loss of colour with a tape recorded in LP During playback or still picture, press FF for forward mode. high-speed search, or REW for reverse high-speed l Please note that on models HR-J265/260EK/265ES the 1 search. picture may be distorted in these modes. To resume normal play
Inhaltszusammenfassung zur Seite Nr. 10
PAUSE 3 BASIC OPERATIONS (cont.) 10 TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder. Recording LOAD A CASSETTE Insert a cassette with the record safety tab intact (See Turn on the TV and select the VIDEO channel (or AV mode). below). 1 l The counter is reset to 0:00:00 and the recorder power comes on automatically. 5 CHOOSE A PROGRAMME Press TV PROG +/– or the NUMBER keys to select the preset
Inhaltszusammenfassung zur Seite Nr. 11
3 11 Record One Programme While Watching Another SELECT PRESET TO WATCH Once recording is in progress, all you need to do is to DISPLAY STANDBY/ON set the preset controls on the TV for the station you wish TIMER 1 to view. REC LINK TV PROG l The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape. Elapsed Recording Time Indication You can check the exact time of a recording. SET COUNTER DISPL
Inhaltszusammenfassung zur Seite Nr. 12
SP/LP 3 BASIC OPERATIONS (cont.) 12 With VIDEO Plus+, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise. VIDEO Plus+ ACCESS VIDEO PLUS+ SCREEN Press PROG. VIDEO PLUS+ Timer 1 Programming [0 – 9] = [+/–] : EXPRESS PROGRAMING [PROG] : EXIT Before performing VIDEO Plus+ Timer Programming: l Make sure that the recorder's built-in clock is set The front display panel looks like this: properly. l Insert a cassett
Inhaltszusammenfassung zur Seite Nr. 13
% 13 Satellite Receiver Users SET TAPE SPEED To timer-record a satellite broadcast using VIDEO Plus+: Press SP/LP ( ) to set the tape speed. 1 Perform steps 1 – 7. 2 Set the satellite receiver to the appropriate channel 4 before the selected programme begins. 3 Leave the satellite receiver's power on. SET PDC MODE Press PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ 5 PDC" is lit on the display panel, PDC is set to ON. ATTENTION If "VPS/PDC OFF" is displayed on
Inhaltszusammenfassung zur Seite Nr. 14
PDC SP/LP STOP+/– DATE+/– 3 BASIC OPERATIONS (cont.) 14 If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme. Express Timer ACCESS VIDEO PLUS+ SCREEN Programming Press PROG. 1 Before performing Express Timer Programming: l Make sure that the recorder's built-in clock is set properly. ACCESS PROGRAMME l Insert a cassette with the safety tab in place. The recorder SCREEN will come on automatically
Inhaltszusammenfassung zur Seite Nr. 15
15 Satellite Receiver Users ENTER PRESET POSITION To timer-record a satellite broadcast using Express Timer Press TV PROG +/– to Programming: – P1 – enter the preset position 1 Perform steps 1 – 10. Enter "L-2" for the preset position START STOP 6 corresponding to the in step 6. 21:00 = 22:00 broadcasting station you 2 Set the satellite receiver to the appropriate channel SP VPS/PDC OFF wish to record. before the selected programme begins. DATE TV PROG 3 Leave the satellite receiver's power on.
Inhaltszusammenfassung zur Seite Nr. 16
SP/LP DATE+/– 3 BASIC OPERATIONS (cont.) 16 Check, Cancel And Replace Programmes DISENGAGE TIMER MODE Press , then press . 1 123 ACCESS PROGRAMME CHECK 2 45 6 SCREEN/DISPLAY Press . PR START STOP CH DATE 7 89 PDC 1 8:00 10:00 3 24.12 2 2 10:00 10:45 2 25.12 4 3 11:30 13:00 1 25.12 0 4 5 6 TV PROG+/– 7 START+/– 8 [ ] : NEXT 1 ? ACCESS PROGRAMME OK SCREEN/DISPLAY Press again to check – P1 – more information. Each time you press , the 3 START STOP next programme's 8:00 = 10:00 information appear
Inhaltszusammenfassung zur Seite Nr. 17
3 ADVANCED OPERATIONS 17 Index Search Your recorder automatically marks ¢ 2 index codes at the beginning of Looking For each recording. This function gives you quick access to any one of 9 index codes in either direction. The Scene NOTE: Before starting, make sure the recorder is in the Stop mode. You Want ACTIVATE INDEX SEARCH Press @ or # (4 or ¢). “4 1” or “¢ 1” is displayed on screen and search begins in the corre- 1 sponding direction. l To access index codes 2 through 9, press @ or # repea
Inhaltszusammenfassung zur Seite Nr. 18
PLAY 3 ADVANCED OPERATIONS (cont.) 18 B.E.S.T. Picture System The B.E.S.T. (Biconditional Equalised Signal Tracking) system Playback/ checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”. Recording TURN ON THE RECORDER According To Press . 1 Tape Charac- ACCESS MAIN MENU SCREEN teristics Press MENU. Turn on the TV and select the VIDEO chan
Inhaltszusammenfassung zur Seite Nr. 19
19 Playback Recording The recorder assesses the quality of the tape once you initiate playback. START RECORDING Press and hold RECORD and press PLAY on the remote, or press RECORD on the recorder. START PLAYBACK 1 DURING B.E.S.T. Press PLAY. 1 l The recorder adjusts the playback picture quality based on the quality of the tape in use. l B.E.S.T. is active during Auto Tracking. “BEST” B.E.S.T. COMPLETE appears blinking on the recorder’s display panel. NOTES: l When watching a tape recorded with “
Inhaltszusammenfassung zur Seite Nr. 20
ADVANCED OPERATIONS (cont.) 20 This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder's AV2 IN/DECODER connector and programme the timer on the Automatic satellite receiver; the recorder starts recording when the signals input from the satellite receiver to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops Satellite recording and the power
