Inhaltszusammenfassung zur Seite Nr. 1
T
V
–
+
T
G
V
O
P
R
CONTENTS
SAFETY FIRST 2
Safety Precautions.............................2
Some Do's And Don'ts .....................4
QUICK SET UP GUIDE 5
CHECK THE CONTENTS ..................5
INSTALLATION ................................6
AUTO SET UP ..................................8
D-VHS DIGITAL RECORDER
T-V LINK 11
T-V LINK Functions ......................... 11
BASIC OPERATIONS 12
Playback .........................................12
HM-DR10000EK
Recording .............................
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY FIRST 2 Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. IMPORTANT n Please read the various precautions on p. 2 – 4 of this instruction manual before installing or operating the recorder. n It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright i
Inhaltszusammenfassung zur Seite Nr. 3
3 The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on and off. " " shows electrical power standby and " " shows ON. Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single- speed video recorder. Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette. 1. DO NOT place the recorder . . . ... in an environment prone to extreme tem
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY FIRST (cont.) 4 Some Do's And Don'ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnec- tions between pieces of equipment) are
Inhaltszusammenfassung zur Seite Nr. 5
T V – + T G V O P R QUICK SET UP GUIDE 5 Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder. Please use this QUICK SET UP GUIDE to help you to set up your video cassette recorder. CHECK THE CONTENTS 1 CHECK ALL THE CONTENTS SHOWN BELOW Video Cassette Recorder CABLE /SAT VCR TV 1 LCD PROG AUDIO – –:– – TV/VCR POWER TIMER REC LINK DIGITAL TBC/NR STD LS3 ENTER/ENTREE 30 SEC 2 1 23 . , / ABC DEF 456 3 GHI JKL MNO VPS/PDC DAILY/QTDN. WEEKLY/HEBDO 4 789 PQRS TUV WXYZ 4 0000 AUX M
Inhaltszusammenfassung zur Seite Nr. 6
QUICK SET UP GUIDE (cont.) 6 INSTALLATION 2 CONNECT VIDEO RECORDER TO TV Place the recorder on a stable, flat surface. Back of TV RF Cable TV Aerial Cable (provided) (not provided) Aerial connector 21-pin AV input connector (SCART) AV1 IN/OUT 21-pin SCART Cable (provided) AV1 OUT switch ANT. IN SYNCHRO EDIT JLIP R.PAUSE AV1 OUT S OUT S IN L (S-1) COMP. Y/C AV1 IN/OUT(L-1) ANT. IN AUDIO R Mains outlet OUT IN(S-1) ANT. OUT AV2 IN/DECODER(L-2) ANT. OUT DV IN Mains power inlet Back of Recorder ATTEN
Inhaltszusammenfassung zur Seite Nr. 7
7 Back of TV AUDIO IN connectors S-Video cable S-VIDEO IN (provided) connector Audio cable (not provided) Aerial connector S OUT ANT. IN Mains outlet Mains power inlet SYNCHRO EDIT JLIP R.PAUSE AV1 OUT S OUT S IN L (S-1) COMP. Y/C (L-1) ANT. IN AV1 IN/OUT AUDIO R (S-1) OUT IN ANT. OUT AV2 IN/DECODER(L-2) DV IN Back of Recorder AUDIO OUT ANT. OUT RF Cable (provided) S-VIDEO CONNECTION NOTES: To connect to a TV with S-VIDEO/AUDIO IN connectors . . . c You can obtain high-quality S-VHS pictures. 1–
Inhaltszusammenfassung zur Seite Nr. 8
QUICK SET UP GUIDE (cont.) 8 AUTO SET UP 3 SET THE TUNER CHANNELS, CLOCK AND GUIDE PROGRAM NUMBERS The Auto Set Up function sets the tuner channels, clock and Guide Program numbers assigned by the VIDEO Plus+ system automati- cally the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet. Before performing the following procedure, make sure that: n the TV aerial cable is connected to the recorde
Inhaltszusammenfassung zur Seite Nr. 9
9 PRESET DOWNLOAD SET THE TUNER CHANNELS BY DOWNLOADING FROM YOUR TV, CLOCK AND GUIDE PROGRAM NUMBERS When you connect the recorder and your TV via fully-wired 21-pin SCART cable (Z pg. 6), you can set the recorder's tuner channels by downloading preset data from your TV instead of using the Auto Set Up function (Z pg. 8). After downloading is completed, the recorder sets the clock and Guide Program numbers assigned by the VIDEO Plus+ system automatically. For details, refer to the instruction m
Inhaltszusammenfassung zur Seite Nr. 10
QUICK SET UP GUIDE (cont.) 10 Auto Set Up results appear on the display panel When both auto channel set and auto clock set have been completed successfully the A correct current time will be displayed. When auto channel set has been completed successfully but auto clock set has not, "(PR)1" B will be displayed. When neither auto channel set nor auto clock set has been completed successfully, "– –:– –" C will be displayed. * You can check if the Guide Program numbers have been set correctly when
Inhaltszusammenfassung zur Seite Nr. 11
T-V LINK 11 Direct Rec You can start recording the programme that you are watching T-V Link on your TV with simple operation. Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder. Follow the procedure below to use this function. Functions TURN ON THE RECORDER When you connect the recorder and your TV via a fully-wired 21-pin SCART cable (Z pg. 6), the following functions are Press . available. You can use these functions only with a TV offering T-V Link, et
Inhaltszusammenfassung zur Seite Nr. 12
FF REW PLAY BASIC OPERATIONS 12 The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Playback c This recorder can play back tapes that have been recorded in D-VHS (MTP), S-VHS and VHS formats. c When playing back a tape, this recorder automatically Turn on the TV and select the AV mode. identifies the recording format (D-VHS, S-VHS, or VHS).
Inhaltszusammenfassung zur Seite Nr. 13
h d r c a r w a r e o s F y a l P n o w i t o l o S m 13 Still Possible operations on this page for tapes recorded in D-VHS mode: c Still picture during playback by pressing PAUSE. c High-speed (turbo) search by pressing FF or REW. Slow Motion (S-VHS/VHS Mode Only) ACTIVATE SLOW-MOTION PLAYBACK JOG dial SHUTTLE ring During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse NOTES: 1 slow motion (refer to the illustration on the left). c The
Inhaltszusammenfassung zur Seite Nr. 14
STD/LS3 (SP/LP) PAUSE TV PROG STOP BASIC OPERATIONS (cont.) 14 D-VHS Recording Recording LOAD A CASSETTE Insert a cassette with the record safety tab intact (See TV signals being received by the recorder’s built-in tuner can be next page). recorded onto a video tape. You can “capture” a TV programme 1 using your video recorder. c The counter is reset to 0:00:00 and the recorder power comes on automatically. c Turn on the TV and select the AV mode. c While "– – – –" is blinking on the front displ
Inhaltszusammenfassung zur Seite Nr. 15
15 Compatibility Of Cassettes And S-VHS/VHS Recording Recording Mode LOAD A CASSETTE Recording Mode Insert a cassette with the record safety tab intact. Cassette D-VHS S-VHS VHS c The counter is reset to 0:00:00 and the recorder 1 power comes on automatically. D-VHS Yes Yes Yes CHOOSE A PROGRAMME S-VHS No Yes Yes Press TV PROG +/– or the NUMBER keys to select the channel you wish to record. VHS No No Yes 2 c The TV PROG dial can also be used to select a channel. NOTES: c The D-VHS (MTP), S-VHS a
Inhaltszusammenfassung zur Seite Nr. 16
RECORD TV PROG BASIC OPERATIONS (cont.) 16 Record One Programme While Watching Another SELECT PRESET TO WATCH Once recording is in progress, all you need to do is to set the preset controls on the TV for the station you 1 wish to view. c The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape. Instant Timer Recording (ITR) This easy method allows you to record for any length of time from 30 m
Inhaltszusammenfassung zur Seite Nr. 17
17 Elapsed Recording Time Indication You can check the exact time of a recording. SET COUNTER DISPLAY Press – –:– – (or DISPLAY) until a counter reading appears on the dispay panel. 1 RESET COUNTER Press 0000 (or COUNTER RESET) before starting recording or playback. 2 c The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. 1 – –:– – – –:– – Tape Remaining Time 2 123 DISPLAY REMAINING TIME 3 456 Press – –:– – (or DISPLAY) until the time remaining on the tape appears
Inhaltszusammenfassung zur Seite Nr. 18
BASIC OPERATIONS (cont.) 18 With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding ® code number which your recorder is able to recognise. VIDEO Plus+ ACCESS VIDEO PLUS+ SCREEN Press PROG. VIDEO PLUS+ Timer Programming 1 Before performing the VIDEO Plus+ Timer Programming: c Make sure that the recorder's built-in clock is set properly. c Insert a cassette with the safety tab in place. The recorder will come on automatically. [0 – 9] : V
Inhaltszusammenfassung zur Seite Nr. 19
19 Satellite Receiver Users SET TAPE SPEED To timer-record a satellite broadcast using the VIDEO Plus+ D-VHS mode: system: Press STD/LS3 ( ) to set the tape speed. 1 Set "AV2 SELECT" to the appropriate mode. (Z pg. 50) 4 S-VHS or VHS mode: 2 Perform steps 1 – 7. Press SP/LP ( ) to set the tape speed. 3 Set the satellite receiver to the appropriate channel before the selected programme begins. SET PDC MODE 4 Leave the satellite receiver's power on. Press PDC to select "ON" or "OFF". If "VPS/PDC O
Inhaltszusammenfassung zur Seite Nr. 20
PDC DATE+/– BASIC OPERATIONS (cont.) 20 If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme. Express Timer ACCESS VIDEO PLUS+ SCREEN Programming Press PROG. 1 Before performing Express Timer Programming: c Make sure that the recorder's built-in clock is set properly. ACCESS PROGRAMME c Insert a cassette with the safety tab in place. The recorder SCREEN will come on automatically. c Set the appr
