Inhaltszusammenfassung zur Seite Nr. 1
3-067-104-11 (2) GB
Video Cassette
Recorder
Operating Instructions
PAL
SLV-X9G
© 2001 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
Keep the unit and cassettes away from equipment WARNING with strong magnets, such as microwave ovens or To prevent fire or shock hazard, do not expose the large loudspeakers. unit to rain or moisture. Do not place heavy objects on the unit. To avoid electrical shock, do not open the cabinet. If the unit is brought directly from a cold to a Refer servicing to qualified personnel only. warm location, moisture may condense inside the VCR and cause damage to the video head and Mains lea
Inhaltszusammenfassung zur Seite Nr. 3
Getting Started Table of contents Getting Started Additional Operations 63 Playing/searching at various speeds 4 Index to parts and controls 65 Setting the recording duration time 9 Step 1 : Unpacking 66 Synchronized Recording 10 Step 2 : Setting up the remote 68 Checking/changing/cancelling commander timer settings 14 Step 3 : Connecting the VCR 70 Recording stereo and bilingual 20 Step 4 : Setting up the VCR with programmes the Auto Set Up function 72 Searching using the Smart Search 21 S
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel A?/1 (on/standby) switch (43) M DIAL TIMER (51) B Tape compartment N PROGRAM +/– buttons (22) (64) (80) C Remote sensor (10) O AUDIO DUB button (89) DA (eject) button (45) P AUTO SET UP/RF (Radio E Shuttle ring (63) Frequency) CHANNEL button (20) (21) FH (play) button (45) (63) Q SYNCHRO REC (Synchronized G JOG button (64) Recording) button (66) H RECz (record) button (88)
Inhaltszusammenfassung zur Seite Nr. 5
Getting Started Display window STEREO NICAM VIDEO VPS SPLP OPC SYNCHRO PDC EP STB TV RR A Timer indicator (53) (58) (61) J OPC (Optimum Picture Control) indicator (81) B SYNCHRO indicator (67) K TV indicator (49) C STEREO indicator (70) L Audio dubbing indicator (89) D NICAM indicator (70) M Tracking indicator (80) E (smartlink) indicator (16) N Time counter/clock/line/programme F VIDEO indicator (15) (48) position indicator (45) (47) (88) G VPS (Video Programme System)/ O Remaining time indic
Inhaltszusammenfassung zur Seite Nr. 6
Rear panel A Mains lead (14) (15) E i LINE-1 (TV) i LIGNE-1 (TV) connector (15) B t LINE-3 IN connector (19) (66) (86) (87) F (audio out) R/D (right) L/G (left) C AERIAL IN jacks (19) ANTENNE ENTREE connector (14) (15) G STB CONTROL CONTROLEUR STB jack (17) (18) D AERIAL OUT ANTENNE SORTIE connector (14) (15) Index to parts and controls 6
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started AZ EJECT button (45) Remote commander B INPUT SELECT button (49) (61) (88) WIDE button (for TV) (12) C AUDIO MONITOR button (12) (70) D ×2 button* (63) Ey SLOW button* (63) F SP (Standard Play)/LP (Long Play) button (47) G DISPLAY button (12) (48) H - (ten’s digit) button (11) (49) I2 (volume) +/– buttons (for TV) 123 (12) 456 Jz REC (record) button (48) (65) 789 K MENU button (39) (68) 0 LX PAUSE/M button (39) (45) x STOP/m button (39) (45) m REW (rewind)/< button (45) (63)
Inhaltszusammenfassung zur Seite Nr. 8
M[TV] / [VIDEO] remote control switch (10) N?/1 (on/standby) switch (11) (58) O COUNTER/REMAIN button (48) / (Teletext) button (for TV) (12) P AUDIO DUB button (89) a TV power on/TV mode select button (for TV) (12) Q./> INDEX SEARCH buttons* (79) R CLEAR button (45) (56) (68) S t TV/VIDEO button (11) (15) (48) 123 T Programme number buttons (11) (49) 456 U STB (Set-Top Box) button (47) (57) 789 (61) 0 V PROG (programme) +/– buttons (11) (31) (49) c/C Teletext page access buttons (for
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Step 1 : Unpacking Check that you have received the following items with the VCR: Remote commander Aerial cable R6 (size AA) batteries Set-Top Box controller Unpacking 9
Inhaltszusammenfassung zur Seite Nr. 10
Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate your S
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started ?/1 WIDE / a AUDIO MONITOR FASTEXT buttons DISPLAY t TV/VIDEO 123 Programme 456 number 789 buttons -/-- 0 PROG +/–/ c/C 2 +/– TV control buttons To Press Set the TV to standby mode ?/1 Select an input source: aerial in or line in t TV/VIDEO Select the TV’s programme position Programme number buttons, -, PROG +/– continued Setting up the remote commander 11
Inhaltszusammenfassung zur Seite Nr. 12
To Press Adjust the volume of the TV 2 +/– Switch to TV (Teletext off) a (TV) Switch to Teletext / (Teletext) Select the sound AUDIO MONITOR Use FASTEXT FASTEXT buttons Call up the on-screen display DISPLAY Change the Teletext page c/C Switch to/from wide mode of a Sony wide TV (For WIDE other manufactures’ wide TVs, see “Controlling other TVs with the remote commander” below.) Notes With normal use, the batteries should last about three to six months. If you do not use the remote command
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To switch to wide mode, see the footnotes below this table for the applicable code numbers. Manufacturer Code number Manufacturer Code number 1 1 Sony Panasonic 01* , 02 17* , 49 1 1 1 Akai 68 Philips 06* , 07* , 08* Ferguson 52 Saba 12, 13 1 1 Grundig 10* , 11* Samsung 22, 23 Hitachi 24 Sanyo 25 JVC 33 Sharp 29 Loewe 45 Telefu
Inhaltszusammenfassung zur Seite Nr. 14
Step 3 : Connecting the VCR If your TV has a Scart (EURO-AV) connector, see page 15. Connection to your TV with an aerial cable only, see this page. Connection to your TV and Set-Top Box, see page 17. If your TV does not have a Scart (EURO-AV) connector AERIAL IN AERIAL OUT Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from AERIAL 1 ANTENNE your TV and connect it to IN ENTREE AERIAL IN on the rear panel of the VCR. OUT SORTIE Connect AERIA
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started If your TV has a Scart (EURO-AV) connector AERIAL IN i LINE-1 AERIAL OUT (TV) Mains lead AERIAL IN to mains Aerial cable (supplied) Scart (EURO-AV) : Signal flow Scart cable (not supplied) Disconnect the aerial cable from AERIAL 1 ANTENNE your TV and connect it to IN ENTREE AERIAL IN on the rear panel of OUT the VCR. SORTIE AERIAL Connect AERIAL OUT of the ANTENNE 2 IN VCR and the aerial input of your ENTREE TV using the supplied aerial cable. OUT SORTIE Connect LINE-1 (TV)
Inhaltszusammenfassung zur Seite Nr. 16
About the SMARTLINK features If the connected TV complies with 1 SMARTLINK, MEGALOGIC* , 2 3 EASYLINK* , Q-Link* , EURO 4 5 VIEW LINK* , or T-V LINK* , this VCR automatically runs the SMARTLINK function after you complete the steps on the previous page (the indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. Preset Download You can download your TV tuner preset data to this VCR and tune the VCR according to that data
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started Connection to your TV and Set-Top Box (STB) If your STB has a Scart (EURO-AV) connector, see page 18. If your STB does not have a Scart (EURO-AV) connector Set the STB CONNECTION setting to RF (see page 24). Aerial cable (not supplied) STB STB AERIAL IN CONTROL STB controller’s side view (supplied) AERIAL OUT iLINE-1 (TV) AERIAL IN Aerial cable (supplied) Scart (EURO-AV) Scart cable* (not supplied) : Signal flow * If your TV does not have a Scart (EURO-AV) connector, the Scar
Inhaltszusammenfassung zur Seite Nr. 18
If your STB has a Scart (EURO-AV) connector The illustration below shows an example of connecting the STB to LINE-3 IN. In this case, set the STB CONNECTION setting to LINE3 (see page 24). Scart cable (supplied with STB the STB) STB tLINE-3 IN CONTROL STB controller’s Side view (supplied) AERIAL IN iLINE-1 AERIAL OUT (TV) AERIAL IN Aerial cable Scart (supplied) (EURO-AV) Scart cable (not supplied) : Signal flow You can watch programmes from the Set-Top Box connected to this VCR on your
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started Additional connections To a stereo system You can improve sound quality by connecting a R/D L/G stereo system to the R/D LINE IN L/G jacks as shown on the right. Audio cable (not supplied) : Signal flow To use the Line Through function when connecting to video t LINE-3 IN equipment other than a LINE OUT Set-Top Box Using the Line Through function, you can watch programmes from other equipment connected to this Scart cable (not supplied) VCR on the TV even when the V
Inhaltszusammenfassung zur Seite Nr. 20
Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the TV channels, guide channels for the VIDEO Plus+ system, RF cheannel, and VCR clock automatically. AUTO SET UP AUTO Hold down AUTO SET UP on the VCR for more than three SET UP seconds. The VCR automatically turns on, and starts searching for all of the RF CHANNEL receivable channels and presets them in the ap
