Inhaltszusammenfassung zur Seite Nr. 1
HD DIGITAL VIDEOCASSETTE RECORDER
HDW-S2000
HDW-S2000P
[English]
OPERATION MANUAL
1st Edition (Revised 1)
Inhaltszusammenfassung zur Seite Nr. 2
This symbol is intended to alert the user to the WARNING presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U.S.A. To avoid electrical shock, do not open the This equipment has been tested and found to comply with cabinet. Refer servicing to qualified the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules
Inhaltszusammenfassung zur Seite Nr. 3
WARNING: THIS WARNING IS APPLICABLE FOR OTHER Pour les clients européens COUNTRIES. Ce produit portant la marque CE est conforme à la fois à la Directive sur la compatibilité électromagnétique (EMC) (89/ 1.Use the approved Power Cord (3-core mains lead)/ 336/CEE) et à la Directive sur les basses tensions (73/23/ Appliance Connector/Plug with earthing-contacts that CEE) émises par la Commission de la Communauté conforms to the safety regulations of each country if européenne. applicable. La confo
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents 1-1 Features ........................................................................................... 1-1 Chapter 1 1-2 Example System Configuration .................................................... 1-4 Overview 2-1 Control Panels ................................................................................ 2-1 Chapter 2 2-1-1 Upper Control Panel .............................................................. 2-3 Location and Function of 2-1-2 Lower Control Panel ......
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents 6-1 Overview ......................................................................................... 6-1 Chapter 6 6-2 Shot Mark Operation Menu .......................................................... 6-3 Shot Mark Function 6-3 Shot Mark Operations ................................................................... 6-4 6-3-1 Reading Shot Marks .............................................................. 6-4 6-3-2 Writing Shot Marks ........................................
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Overview Chapter 1 Overview 1-1 Features The HDW-S2000/S2000P is a high-definition (HD) HDCAM format digital videocassette recorder based on the HDCAM format. The HDCAM format uses the same 12.65-mm width This unit uses large scale integrated circuits for signal tape as the conventional Betacam series. It provides processing, and has a simple internal construction, high definition images, offering up to two hours of allowing it to provide functionality at least equivalent recording. Fo
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 1 Overview 1-1 Features High-performance heads and compatibility Recording and playback of SDTI functions compressed data (optional) The newly developed high-performance heads and This unit can be fitted with SDTI input/output dynamic tracking (DT) technology provide high- complying with SMPTE 305M, and can therefore be density recording and playback in narrow tracks with used for transferring HDCAM data, audio data, high reliability. In addition to HDCAM recording and metadata, and so o
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1 Overview High quality variable speed playback and Downward converter function digital jog sound function The unit has an HD-to-SD downward converter function, and can output standard definition SDI, In HDCAM format playback, the dedicated playback analog component and analog composite signals even DT heads allow smooth, noiseless playback. During while playing back an HDCAM format tape. Betacam SX playback, noiseless playback is achieved through unique multihead playback technology. In
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Overview 1-1 Features 1-2 Example System Configuration The following conceptual diagram shows an example of use. BVE-series editor Tape control SDTI (optional) Audio/video HDSDI server system Digital cassette HDW-S2000/S2000P HDSDI/Analog HDSDI composite SDTI (optional) Video monitor HD VTR Analog composite/component Analog audio SDI Audio monitor SD VTR 1-4 Chapter 1 Overview
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Control Panels There are three control panels, as follows: •Upper control panel • Lower control panel •Switch panel Z Upper control panel (see page 2-3) 59.94 VID. IN PB/EE CONFI CTL/TCMENU TCGSET SDI EE DISABL TC Lower control panel (see page 2-4) CONTROL PANEL Switch panel (access by opening the lower control panel) (see page 2-15) KEY INHI PANEL SEL OFF REAR FRONT ON Chapter 2 Location and Function of Parts
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 2 Location and Function of Parts 2-1 Control Panels To open the lower control panel Push in the lower control panel unlock buttons to open the lower control panel. You can fix the lower control panel in any of five positions between vertical and horizontal. Lower control panel unlock buttons To close the lower control panel Push up the folding levers on both sides at the same time allowing the lower control panel to close. Note When closing the lower control panel, be careful not to catc
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2 Location and Function of Parts 2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button 4 Format indicators Cassette compartment BETACAM/SP BETACAM SX HDCAM REMOTE POWER EJECT 1(9P) 2(50P) RS-232C Z PHONES 5 PHONES jack and control 1 POWER switch 4 Format indicators Pressing the ‘ ) ’ side of the switch powers the unit on. The indicator (BETACAM/SP, BETACAM SX or When the unit is powered on, the audio setting display HDCAM) corresponding to the cur
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 2 Location and Function of Parts 2-1 Control Panels 2-1-2 Lower Control Panel 4 Time data/menu display section (see page 2-8) 2 CHANNEL CONDITION 5 MULTI CONTROL knob and PUSH/ indicator (see page 2-7) SHIFT indicator (see page 2-9) 1 Audio control section 3 Menu control buttons 6 RESET button (see page 2-9) (see page 2-5) (see page 2-7) 59.94 VID. IN PB/EE CONFI CTL/TCMENU TCGSET SDI EE DISABL TC 7 Search control section (see page 2-9) 8 REC INHI indicator (see page 2-11) 9 Tape transp
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Location and Function of Parts 2 DISPLAY FULL/FINE button 1 Audio control section Pressing this button toggles the display mode of the level meters in the audio setting display section 1 Audio selection function selector buttons between FULL and FINE. 2 DISPLAY FULL/FINE button FULL: The display covers the range –60 dB to 0 dB or –40 dB to +20 dB as selected using setup menu 3 Audio setting display section item 806. In this mode the segment of the display 4 Audio monitor corresponding
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2 Location and Function of Parts 2-1 Control Panels Mixing setting mode (the MIX indicator flashes): DATA indicator: Lights when the audio output The buttons in the lower row (REC row) select the signals are recognized as data with the unit in 1) tracks (audio channels on the tape) to contain the recording, E-E , or playback mode. mixed signals. In the audio setting display section, OVER indicator: While the unit is in recording or the MIX indicator for the corresponding track playback m
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 Location and Function of Parts 5 REC (recording) controls 3 Menu control buttons These individually adjust the recording levels on channels 1 to 4, and cue audio. These buttons are used for function menu (see the To set the recording level, put the unit into E-E mode, following section “Overview of the function menu”) press to protrude the control knobs and adjust the level and setup menu (see Chapter 10) operations. The page while watching the level meters. buttons (V, v, and HOME) s
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 2 Location and Function of Parts 2-1 Control Panels Time data type indicator 4 Time data/menu display section This indicates the type of data displayed in the time data display area 1. 1 Time data display LTC (longitudinal time code): Time code recorded on a longitudinal track on the tape 59.94 LUB: LTC user bit values VITC (vertical interval time code): Time code 1 VID. IN PB/EE CONFI CTL/TCMENU TCGSET recorded in the vertical blanking interval SDI EE DISABL TC VIUB: VITC user bit val
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Location and Function of Parts FORWARD VAR CONFI (ON)/PREREAD indicators 2 Menu display 1) These indicate the state of the VTR CONFI playback This displays the function menu and setup menu. function. When the CONFI playback function is For details on the function menu, see Chapter 9 and for enabled, the CONFI indicator appears, and when details on the setup menu, see Chapter 10. CONFI playback is actually being carried out the CONFI ON indicator also appears. When F6 (PREREAD) is set
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2 Location and Function of Parts 2-1 Control Panels Playback modes using the search dial 1 SHUTTLE button Playback mode Operations and functions To use the search dial for playback in shuttle mode, press this button, turning it on. Shuttle Press the SHUTTLE button or the search dial so that the SHUTTLE button lights, then turn the search dial. For details of playback in shuttle mode, see the description Playback is carried out at a speed of the search dial 5. determined by the position o
