Inhaltszusammenfassung zur Seite Nr. 1
DIGITAL VIDEOCASSETTE COMPACT PLAYER
J-H1
J-H3
i.LINK INTERFACE BOARD
HKJ-101
[English]
OPERATION MANUAL
1st Edition (Revised 1)
Inhaltszusammenfassung zur Seite Nr. 2
English • Do not defeat the safety purpose of the polarized or WARNING grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two To prevent fire or shock hazard, do not blades and a third grounding prong. The wide blade or the expose the unit to rain or moisture. third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for To avoid electrical shock, do not open the replacement
Inhaltszusammenfassung zur Seite Nr. 3
For the customers in Europe (for the J-H1 and J-H3) If you have questions on the use of the above Power Cord / This product with the CE marking complies with both the Appliance Connector / Plug, please consult a qualified EMC Directive (89/336/EEC) and the Low Voltage Directive service personnel. (73/23/EEC) issued by the Commission of the European CAUTION Community. Compliance with these directives implies conformity to the Danger of explosion if battery is incorrectly replaced. following Euro
Inhaltszusammenfassung zur Seite Nr. 4
Pour toute question concernant l’emploi du cordon WARNUNG d’alimentation/connecteur pour appareils/fiche ci-dessus, consulter un agent de service compétent. Um Feuergefahr und die Gefahr eines ATTENTION elektrischen Schlages zu vermeiden, darf Il y a un risque d’explosion si la pile est mal insérée. das Gerät weder Regen noch Feuchtigkeit Remplacer la pile uniquement par une pile de même type ou ausgesetzt werden. de type équivalent recommandé par le fabricant. Jeter les piles usées conformémen
Inhaltszusammenfassung zur Seite Nr. 5
Für Kunden in Europa (für den J-H1 und J-H3) Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Direktive (89/336/EMG) der EG-Kommission als auch die Direktive Niederspannung (73/23/EMG). Angewandte Normen: • EN60065: Produktsicherheit • EN55103-1: Elektromagnetische Verträglichkeit (Störaussendung) • EN55103-2: Elektromagnetische Verträglichkeit (Störfestigkeit) für die folgenden elektromagnetischen Umgebungen: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem maße industriel
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents 1-1 Features ........................................................................................... 1-1 Chapter 1 1-2 Sample System Configuration ....................................................... 1-3 Overview 1-3 Using the CD-ROM Manual.......................................................... 1-5 2-1 Control Panel .................................................................................. 2-1 Chapter 2 2-1-1 Display Section ...................................
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Overview Chapter 1 Overview 1-1 Features The J-H1 (also referred to as the unit in this manual) is Notes a Digital Videocassette Compact Player based on the • Since the unit does not have a dynamic tracking 1) HDCAM format. function, the tape may not replay correctly if the recording patterns on the tape are disturbed. For monitoring, this unit uses a down-converter so that • If you use mobile radio equipment within 50 cm (19 you can check the recorded images even in the SD 3/4 inches)
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 1 Overview 1-1 Features Note Compact design The 2-3 pulldown sequence process is guaranteed only Since the unit is as compact as a standard desktop during playback in PLAY mode. personal computer in size, it is ideal for personal use on your desktop. In addition, front loading of both S Time code multiplexed to pull down signal output and L cassettes is standard. • The value of the time code multiplexed to pull down HD SDI output signal is determined by the time code Menu-based setup pre
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1 Overview 1-2 Sample System Configuration Example for the J-H1 HDCAM camcorder Digital cassette 1) J-H1 DV Computer JZ-1 RS-232C D3 Computer Monitor with HD D3 input connector Analog composite MONITOR SD video monitor Monitor for computer Analog component Analog audio Monitor with Y/Pb/Pr Audio monitor input connectors ..........................................................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Overview 1-2 Sample System Configuration Example for the J-H3 HDCAM camcorder Reference video signal generator Digital cassette RS-422A EXT SYNC J-H3 SD SDI HD SDI SD VTR HD VTR or A/V server system JZ-1 1) DV RS-232C Computer Computer Analog D3 composite SD video monitor Monitor with HD D3 input connector Analog MONITOR audio Audio monitor Monitor for computer TC Analog OUTPUT component Time code reader Monitor with Y/Pb/Pr input connectors ............................................
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 1 Overview 1-3 Using the CD-ROM Manual The supplied CD-ROM includes Operation Manuals To Read the CD-ROM Manual for the J-H series of videocassette players (English, Japanese, French, and German versions). To read the operation manual included on the CD- ROM disc, do the following. CD-ROM System Requirements 1 Insert the CD-ROM disc in your CD-ROM drive. The following are required to access the supplied CD- A cover page appears automatically in your ROM disc. browser window. •Computer: P
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Control Panel 1 Carrying handle 2 POWER switch Display section Search control section (See page 2-2) (See page 2-5) 3 Cassette compartment 4 Remote control detector 5 PF-1/2 (PROGRAMMABLE 6 PHONES (headphones) Tape transport control FUNCTION-1/2) button jack and control knob section (See page 2-6) This illustration shows the J-H3. 1 Carrying handle Press the side of the POWER switch marked “OFF” to Use this han
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2 Location and Function of Parts 2-1 Control Panel 4 Remote control detector For details of the assignment, see “Menu bank operations Receives the infrared signal from the supplied Remote (menu items B01 to B12)” on page 5-5. Commander. For details, see “4-4 Using the Remote 6 PHONES (headphones) jack and control knob Commander” on page 4-7. Connect stereo headphones with an impedance of 5 PF-1/2 (PROGRAMMABLE FUNCTION-1/2) 8 ohms to monitor the sound during playback. button The control
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 2 Location and Function of Parts 3 AU MON SEL button 5 CTL/TC/UB (display switching) button Each press of this button switches the audio channel as This selects the time data displayed in the fluorescent display in the following sequence: CTL, TC, UB. As listed below. The selected channels are displayed in the display changes, the corresponding indicators over the FL display. the fluorescent display also light/go off. When basic menu item 026 is set to STEREO Time data display selection
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Location and Function of Parts 2-1 Control Panel 7 FL (Fluorescent) display and indicators These comprise a time data display area, an audio monitor display area and a number of indicators. Audio monitor display area Time data display area Indicator area ❉ Tape transport indicator area This illustration shows the J-H3. Audio monitor display area When LTC has been selected using the LTC/VITC • L/R audio level meter button, the LTC indicator is displayed and Indicates the audio levels of
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2 Location and Function of Parts Tape transport indicator area 3 SHUTTLE dial • Tape transport indicator Turn this to carry out playback in the modes shown in When you press each button in the tape transport the following table. Turn the dial clockwise for control section, the corresponding indicators light. forward playback and counterclockwise for reverse m: REW (rewind) indicator playback. B: PLAY indicator After pressing the JOG/SHUTTLE button, turn the When AUTO TRACKING (the automa
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 Location and Function of Parts 2-1 Control Panel 1 Instance Number Generation Method 2-1-3 Tape Transport Control 2 Instance Number Section 3 Material Number Generation Method 4, 5 Material Number 6 Year/Month/Date 1 EJECT button 7 Hour:Minute:Second 2 REW button 8 Time Zone 9 GPS Altitude 3 PLAY button 0 Number of Satellites qa Auxiliary Device 4 F FWD button (“ ”: not equiped, “+”: equiped) qs PDOP (Position Dilution Of Precision value) 5 STOP button qd Longitude (E: east/W: west) 6
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 2 Location and Function of Parts 2-2 Connector Panel 1 TC OUTPUT connector 2 AC IN connector 3 REMOTE IN connector 5 VIDEO OUTPUT 4 RS-232C connector connectors 6 AUDIO MONITOR OUTPUT connectors 7 EXT SYNC connectors This illustration shows the J-H3 equipped with an HKJ-101 i.LINK Interface Board. 4 RS-232C (RS-232C serial interface) connector 1 TC OUTPUT (time code output) connector (D-sub 9-pin, male) (BNC type ×1) (J-H3 only): Exchanges the RS-232C serial remote control signal Outputs
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Location and Function of Parts 2-2 Connector Panel 6 AUDIO MONITOR OUTPUT connectors DV (i.LINK DV output ) connector (IEEE1394 Audio monitor (L/R) output connectors (XLR type, 6-pin) (available only when an HKJ-101 3-pin, male): i.LINK Interface Board (not supplied) is Outputs two (L and R) audio monitor signals installed): according to the setting of the AU MON SEL This is a connector located on the optional button on the control panel. HKJ-101 i.LINK Interface Board. Outputs video/
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 3 Preparations Chapter 3 Preparations 3-1 Installation Installation of the unit You can install this unit horizontally as well as vertically. However, it is necessary to use the supplied vertical installation stands to prepare the unit for vertical installation as shown in the figure. Notes •When you install this unit vertically, be sure that the handle faces up. •Regardless of whether you install the unit Vertical horizontally or vertically, make sure there is a space installation of 5
