Bedienungsanleitung Soundstream Technologies DTA 1

Inhaltszusammenfassung zur Seite Nr. 1

DTA
Automorwe
Digital to
Processor
OWNER’S MANUAL
SOUNDSTREmAl’v’~
TECHNOLOGlES
Analog

Inhaltszusammenfassung zur Seite Nr. 2

DTA 1 Digital to analog Processor OWNER’S MANUAL Thank you for purchasing the Soundstream DTAl . You now own the finest automotive Digital to Analog processor made, a precision component with audiophile performance. For maximum performance, we suggest you take a few moments to read through this manual, to better acquaint yourself with the design features and capabilities of your new DTAl . This Soundstream product is the result of the combined efforts of Krell Digital and Soundstream Technologie

Inhaltszusammenfassung zur Seite Nr. 3

-l Wiring Layout CONNECTIONS In general, you should plan to connect the DTAl between the digital source and the control head unit, as shown in Figure 3. If you are using an equalizer or active crossover, be sure to insert the DTAl in the chain before any of these components. Determine how your vehicle’s wiring is laid out, and plan to run your new wiring along the same routes. Be sure to keep power wires away from all audio signal wires. (NOTE: Wires containing audio signals can cross a power wi

Inhaltszusammenfassung zur Seite Nr. 4

wires inside the vehicle, hidden from passengers. An exposed wire 7. Connect another (e.g., orange or aqua) wire from the Remote terminal to your control head unit’s remote turn-on connection. can inadvertently be pulled out, and may cause disconnection or shorting. NOTE: This connection enables the DTAl to follow a timed sequence for minimal turn-on and turn-off thumps and is required for circuit location and Mounting activation. The DTAl is compact in size and it generates virtually no heat. I