Inhaltszusammenfassung zur Seite Nr. 1
OWNER’S MANUAL
For Household Use Only
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Technical Details 2 Important Safety Instructions 3 Special AIRBELT K Product Features 4 Optional Power Heads for the AIRBELT K3 6 Optional Attachments, Accessories, Bags and Filters 6 Identification of Parts 7 Assembly 7 Standard Attachments 7 Optional Attachments 7 Operating Instructions 8 Starting the Machine 8 Suction Control 8 Operating the Machine 8 Additional Operating Instructions for K3 with Power Head 9 Starting the Machine and Suction Control 9 Operating the Machine
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE ! When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the p
Inhaltszusammenfassung zur Seite Nr. 4
S u p e r q u i e t a i r e x SEBO AIRBELT K PRODUCT FEATURES SEBO Vacuums Save Money! – SEBO vacuums are the highest air belt disperses the filtered exhaust air around the canister quality machines available. In fact, if properly maintained, SEBO which provides quiet, gentle air flow. SEBO’s unwavering attention vacuums can save ordinary residential users hundreds of dol- to the complete sealing of the machine ensures no dirt escapes lars by providing excellent performance for ten to fifteen ye
Inhaltszusammenfassung zur Seite Nr. 5
SEBO AIRBELT K PRODUCT FEATURES Four-level Manual Brush Height Adjustment – The brush Designed for All Floor Surfaces. height can be adjusted up or down for optimum cleaning. AIRBELT K3: Five Power Head Choices – Quick-release Connections – The AIRBELT K models allow for The AIRBELT K3 has an electrified telescop- quick and convenient connection of telescopic tubes, power ic tube designed to accommodate any brush heads, accessory cleaning heads and on-board tools. choice from the following five
Inhaltszusammenfassung zur Seite Nr. 6
OPTIONAL POWER HEADS FOR THE AIRBELT K3 3 Deep clean your carpet with a SEBO power head, or polish The SEBO DISCO (13” wide, 11 ⁄4” polishing width) – It’s your hard floor with a SEBO DISCO Ultra-High-Speed floor never been easier to make hard floors shine! The SEBO polisher! SEBO power heads and the DISCO polisher are vir- DISCO floor polisher can both vacuum tually maintenance free, and their electronic overload protec- and polish, for a super-gloss finish. It tion feature extends belt life by
Inhaltszusammenfassung zur Seite Nr. 7
IDENTIFICATION OF PARTS 1. Handle grip 14. Exhaust filter cover 1 2. Power control slider (K3 only) 15. AIRBELT shock absorber 2 3. Handle release button 16. Carrying handle 12 4. Telescopic tube 17. Suction opening 5. Slide button 18. Hose release button (K3 only) 3 6. Power cable 19. Hose neck 13 7. Tool release button 20. Crevice nozzle 8. Combination nozzle 21. Parking attachment holder 4 9. On/Off power control knob 22. Power cable shroud 10. Warning light 23. AIRBELT clip 11. Upholstery No
Inhaltszusammenfassung zur Seite Nr. 8
OPERATING INSTRUCTIONS ALL K VACUUMS Starting The Machine - Figures 1, 2 & 3 22 Before turning on your canister, make sure that you have a firm hold on the handle grip to keep the machine from moving forward. 1. With the canister main power control knob (9) in the OFF position, grasp the plug and pull the power cord (6) out from the power cable recess (22). The power cord (6) should be unwound from the cable reel at least two thirds of its length. Note: do not over-extend the cord. 6 2. Plug the
Inhaltszusammenfassung zur Seite Nr. 9
ADDITIONAL OPERATING INSTRUCTIONS FOR K3 WITH POWER HEAD Please refer to your power head owner’s manual for more information Starting The Machine and Suction Control - Figures 1, 2, 8, 9, 10a & 10b Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 8). 1. With the canister main power control knob (9) in the OFF position, and the power control slider on the handle (#2, figure 9) in the OFF position, pull the power cord 40 out from the base
Inhaltszusammenfassung zur Seite Nr. 10
Using the Telescopic Tube, Hose & Attachments - Figures 11 & 12 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may 4 use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power control knob (9) and unplug the vacuum. Then, press the 7 tool release button (7) and pull the tube out. The crevice nozzle (20) and dusting brush (28) may be inserted onto the end of the tube. To use the upholstery nozz
Inhaltszusammenfassung zur Seite Nr. 11
VACUUM MAINTENANCE Always unplug vacuum from outlet 25 ! before dismantling any part of machine! Changing the Filter Bag - Figure 16 45 To change the filter bag (45), set the canister upright (as shown in figure 13), press the cover release catch (25) and lower the filter bag cover (26). Grasp the green filter bag sealing plate (46), slide the plate from the holder (48) and push the filter bag cap (47) on to seal the bag. Slide the sealing plate (46) of 26 a new bag into the bag holder slots (48
Inhaltszusammenfassung zur Seite Nr. 12
CLOG REMOVAL Always unplug vacuum from outlet before removing ! any clogs! NOTE! K3 users with ET-H, ET-1 or ET-2 power heads, please refer to your power 3 head user’s manual for more detailed instructions for removing clogs in your power head. 4 If the “bag full or clog” warning light (10) remains illuminated after the filter bag has been changed and the filters are in good condition, there is likely a clog in the system. Clogs in the Head or Brush - Figure 20 Clogs in the swivel neck (57) of a
Inhaltszusammenfassung zur Seite Nr. 13
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! ! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 7. 2. Not plugged into working outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. K3: The power control slider 4. K3: Set slider switch to “on” switch is set to “0” (“off” position). position. See page 9. Bag full or clog light on 1. Bag full. 1. Replace filter bag. See page 11. Bag ful
Inhaltszusammenfassung zur Seite Nr. 14
AIRBELT K2 SCHEMATIC AND PARTS LIST Canister with Handle/Hose # 9679AM K2 - Midnight Blue # 9696AM K2 - Hunter Green #9696AM K2 Hunter Green Machine Pos. Part # Description 1 6754DG Bottom casing, complete (incl. castors 6751DG) 2 6675DG Suction neck 3 6014 Seal 4 6042WS Spring lock 5 6681HG Bag holder, complete 6 6696AM K Microfilter & Exhaust set 7 6756DG Bag cover, complete (incl. castor 6752DG) 8 6607DG Cover release 9 6629AM Filter bag SEBO K 10 6752DG Castor cpl. (New castor for bag cover
Inhaltszusammenfassung zur Seite Nr. 15
AIRBELT K3 SCHEMATIC AND PARTS LIST Canister with Handle/Hose #9681AM K3 - Red #9684AM K3 - Volcano #9681AM K3 Red Machine #9698AM K3 - Onyx Pos. Part # Description 1 6754DG Bottom casing (incl. castors 6751DG) 2 6677DG Suction neck 3 6014 Seal 4 6042WS Spring lock 5 6681HG Bag holder, cpl. 6 6696AM K Microfilter & Exhaust set 7 6756DG Bag cover, complete (incl. castor 6752DG) 8 6607DG Cover release 9 6629AM Filter bag SEBO K 10 6752DG Castor, complete 11 6652 Cable rewind 12 6621 Switch lever 1
Inhaltszusammenfassung zur Seite Nr. 16
SEBO VACUUM CLEANER WARRANTY Five Years Non-Wear Parts - Five Years Motor - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide the filters, the cable (external cord), the attachment hose, original product purchaser with replacement of Non- the brush rollers, the front bottom plate, the rear Wear Parts which fail due to a material or workman- bottom plate, the telescopic tube, the crevice nozzle, ship defect for a period of five (5) years from the orig- the upholstery nozzle, the
