Inhaltszusammenfassung zur Seite Nr. 1
0
0
ø
ø
5
5
ø
ø
6
6
3
3
ø
ø
ø
ø
auto
auto
ATTIX 965-0H/M SD XC
ATTIX 965-2H/M SD XC
Operating Instructions
107401242 A
2
2
3
3
7
7
2
2
Inhaltszusammenfassung zur Seite Nr. 2
ATTIX 9 H/M Contents 1 Important safety instructions ............................................................................................2 2 Description 2.1 Operating elements ..............................................................8 2.2 Operating panel ....................................................................9 3 Before starting the 3.1 Assembling the vacuum cleaner.........................................10 cleaner 3.1.1 Taking accessories out of the packaging .....
Inhaltszusammenfassung zur Seite Nr. 3
ATTIX 9 H/M 1 Important safety instructions Symbols used to mark Prior to using the appliance for the first time, be sure to read instructions this document through and keep it ready to hand. DANGER Danger that leads directly to serious or irreversible injuries, or even death. WARNING Danger that can lead to serious injuries or even death. CAUTION Danger that can lead to minor injuries and damage. The appliance must � only be used by persons, who have been instructed in its correct usage and
Inhaltszusammenfassung zur Seite Nr. 4
ATTIX 9 H/M Dust Class M (medium). The dusts which belong to this class 1) are: dusts with OEL values > 0.1 mg/m³ as well as saw dust. The machine is tested in its entirety by vacuums for this dust class. The maximum degree of permeability is 0.1% and the dis- posal must be low dust. Dust Class H (high). The dusts which belong to this class are: 1) dusts with OEL values , all carcinogenic dusts and dusts which are mixed with pathogenic agents. Vacuums for Dust Class H are tested in their e
Inhaltszusammenfassung zur Seite Nr. 5
ATTIX 9 H/M Electrical connection 1. It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker. 2. Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is main- tained. 3. Connectors and couplings of power supply cords and extension leads must be watertight. Extension lead As an extension lead, only use the version specified by the manufac- turer or one of a higher quality. When usin
Inhaltszusammenfassung zur Seite Nr. 6
ATTIX 9 H/M During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be: 1. packed in well sealed bags 2. disposed of in a manner that complies with valid regulations for such waste removal. At least once a year, a Nilfisk-ALTO technician or an instructed per- son must perform a technical inspection including filters, air tight- ness and control mechanisms. According to AA.22.201.2 appliances in class H must have their filtration efficiency check
Inhaltszusammenfassung zur Seite Nr. 7
ATTIX 9 H/M Risks Electrical components DANGER Electric shock due to faulty mains connecting lead. Touching a faulty mains connecting lead can result in serious or even fatal injuries. 1. Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it). 2. Regularly check whether the power cord is damaged or shows signs of ageing. 3. Have the faulty mains connecting lead replaced by your Nilfisk-Alto service representative or a qualified electri- cian prior to using the a
Inhaltszusammenfassung zur Seite Nr. 8
ATTIX 9 H/M Hazardous materials WARNING Hazardous materials. Vacuuming up hazardous materials can lead to serious or even fatal injuries 1. The following materials must not be picked up by the vacuum cleaner: - hot materials (burning cigarettes, hot ash, etc.) - flammable, explosive, aggressive liquids (e.g. petrol, solvents, acids, alkalis, etc.) - flammable, explosive dust (e.g. magnesium or alumin- ium dust, etc.) WARNING When the vacuum cleaner has been used with dust classified as “H”,
Inhaltszusammenfassung zur Seite Nr. 9
0 5 ø 6 3 ø auto ATTIX 9 H/M 2 Description 2.1 Operating elements 16 1 15 2 14 3 13 12 4 11 5 10 6 9 8 7 1) Optional accessories / Option depending on model 8 Original Instructions
Inhaltszusammenfassung zur Seite Nr. 10
ATTIX 9 H/M 1 Handle 2 Outlet for waste air 3 Inlet for fresh air 4 Retaining clamp 5 Handle to remove dirt tank 6 Swivel bar to remove dirt tank 7 Bracket for floor nozzle 8 Castor with brake 9 Dirt tank 10 Inlet fitting "H" 11 Inlet fitting "M" 12 Receptacle for electrical lead 1) 13 Applicance switch "I-0-II" 1) Applicance switch with suction power control 'auto-0-I" 1) 14 Appliance socket 15 Hose diameter setting 16 Accessory holder 2.2 Operating panel ATTIX 965-0H/M SD XC ATTIX 965-2H/M
Inhaltszusammenfassung zur Seite Nr. 11
ATTIX 9 H/M 3 Before starting the cleaner 3.1 Assembling the 1. Take vacuum cleaner and vacuum cleaner accessories out of the pack- 3.1.1 Taking accessories out aging. of the packaging 2. The mains plug should not A yet be inserted into a socket. 3. Apply parking brakes (A) on both castors. A 4. Open the retaining clamps (B) B B and remove the upper sec- tion of the vacuum cleaner. 5. Take the accessories (C) out of the dirt tank and the pack- aging. C 1) Optional accessories / Option dep
Inhaltszusammenfassung zur Seite Nr. 12
ATTIX 9 H/M 3.1.2 Before starting the Depending on how hazardous the dust is, the cleaner must be fitted cleaner with appropriate filters. Type of dust Filter bag/waste bag � Non-hazardous dust Waste bag (5 pcs.) � Non-carcinogenic dust with OEL Order No. values > 0.1 mg/m³ (observe any 302001480 additional national regulations) � All dusts with OEL values Safety filter bag � Wood dust (5 pcs.) Order No. 302003473 � All dusts with OEL values Filter element “H” � Wood dust Order No. 10740056
Inhaltszusammenfassung zur Seite Nr. 13
ATTIX 9 H/M 5. Insert the safetyfilter bag (D) in the dirt tank. 6. Fold the top edge of D the disposal bag over the rim of the dirt tank. 7. Push the dirt tank as far as possible into the vacuum cleaner. 8. Swing the bar (B) down- wards without forcing it. C B 9. Close inlet fitting "M" (top) with plug (E). E 10. Connect suction hose to inlet fitting "H" (bottom) (F). F 1) Optional accessories / Option depending on model 12 Original Instructions
Inhaltszusammenfassung zur Seite Nr. 14
ATTIX 9 H/M 3.1.4 Inserting the disposal 1. The mains plug should not bag yet be inserted into a socket. 2. Apply parking brakes (A) on both castors. A A 3. Swing the bar (B) upwards. 4. Use the handle (C) to pull the dirt tank out of the vacuum B cleaner. C 5. Insert the disposal bag (D) in D the dirt tank. 6. Fold the top edge of the dis- posal bag over the rim of the dirt tank. 7. Push the dirt tank as far as possible into the vacuum cleaner. 8. Swing the bar (B) down- wards
Inhaltszusammenfassung zur Seite Nr. 15
ATTIX 9 H/M 9. Close inlet fitting "H" (bottom) with plug (E). E 10. Connect suction hose to inlet fitting "M" (top) (F). F 1) Optional accessories / Option depending on model 14 Original Instructions
Inhaltszusammenfassung zur Seite Nr. 16
ATTIX 9 H/M 4 Control / Operation 4.1 Connections 1. Ensure that the cleaner is 4.1.1 Electrical connection switched off. 2. Insert the power cord into a The operating voltage shown on the properly installed and fused rating plate must corres pond to the socket with earthing contact. voltage of the mains power supply. 4.2 Switching on the Switch Function vacuum cleaner position 1) 4.2.1 Switch " I-0-II " Reduced I suction The hose diameter and the setting for the suction hose diameter
Inhaltszusammenfassung zur Seite Nr. 17
0 ø 5 ø 6 3 ø ø auto ATTIX 9 H/M 4.2.4 Auto-On/Off-Operation 1. Switch off the vacuum clean- - "auto" switch er. 1) position 2. Switch off the power tool. The vacuum cleaner is switched on and off by the power tool connect- ed. Dirt is picked up from the source of dust immediately. To comply with regulations, only ap- proved dust producing tools should be connected. The maximum power consumption of the connected electrical appli- 3. Connect the power tool and ance is stated in section 9.5 "
Inhaltszusammenfassung zur Seite Nr. 18
ATTIX 9 H/M 4.3 Check volume flow 1. Check that all the filters are monitor present and properly fitted. 2. When the motor is running, Before picking up dust with maxi- hold the suction hose shut. mum room concentration values: An acoustic warning sounds after approx. 1 second. 4.4 Acoustic warning For safety reasons, an acoustic warning sounds if the air speed in the suction hose drops to be- low 20 m/s. See section “Trou- bleshooting”. 4.5 Cleaning the filter element After picking up h
Inhaltszusammenfassung zur Seite Nr. 19
ATTIX 9 H/M 5 Applications and methods 5.1 Techniques If used correctly, additional accessories, suction nozzles and suc- tion hoses can enhance the cleaning action and reduce the cleaning effort. Effective cleaning is achieved if you follow just a few guidelines in combination with your own practical experience in special fields. Here are some basic tips. 5.1.1 Picking up dry CAUTION! substances Do not pick up flammable substances. There must always be a safety filter bag in the tank before
Inhaltszusammenfassung zur Seite Nr. 20
0 ø 5 ø 6 3 ø ø auto ATTIX 9 H/M 6 After using the cleaner 6.1 Switching the vacuum 1. After picking up hazardous cleaner off and storage dust, vacuum clean the out- side of the cleaner. 2. Switch off the vacuum clean- er and pull the mains plug out of the socket. 3. Make sure that both plugs are inserted in fittings. 4. Wind up the power cord and hang it on the handle. 5. Empty the tank and clean the vacuum cleaner. 6. After picking up liquids: Store the upper section of the cleaner sepa
