Inhaltszusammenfassung zur Seite Nr. 1
Thank you for selecting a HOOVER product.
HOOVER ®
This cleaner was inspected and packaged carefully before
being shipped from the factory. If you should happen to need
®
Deep Cleaner
assistance during assembly or operation, call
1-800-944-9200 for an automated referral of authorized
service outlet locations (U.S. only) or
1-330-499-9499 (U.S.) and 1-800-263-6376 (Canada) to
speak with a Hoover representative.
PLEASE DO NOT RETURN THIS PRODUCT
TO THE STORE.
Grounding Instructions
This appliance
Inhaltszusammenfassung zur Seite Nr. 2
Questions or Concerns? Important Safeguards! The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regard- When using an electrical appliance, always follow ing its use. Look on the list provided with the basic precaution, including the following: product for your local Hoover Factory Service READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE Center or in the Yellow Pages under “Vacuum Cleaners - Household” for the nearest Authorized To reduce the risk of fire,
Inhaltszusammenfassung zur Seite Nr. 3
Assembling deep cleaner 3 The assembled model will look like this drawing. Push bolts into holes on front of handle (Fig. 3). If bolts will not go through hole easily handle is not pushed completely down. 4 Place nuts in recessed areas on back of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver (Fig. 4). Only two nuts are needed on this model. The extra nut is not required but has been provided for your convenience. Attach upper handle 5 1 SQUEEZE
Inhaltszusammenfassung zur Seite Nr. 4
7 Press or slide cord into cord clip on back of handle. Pull cord tight (Fig. 7) Carpet cleaning machine description 1. Hand grip The assembled deep cleaner will look like the drawing below. 2. Solution trigger: press to release clean solution. 3. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for quick and easy cord release. 1 4. Carrying handle 2 5. Clean solution tank handle 6. Clean solution tank cap/ measuring cup 7. Clean solution tank: holds
Inhaltszusammenfassung zur Seite Nr. 5
To transport General operation Turn deep cleaner off before transporting. Operate deep cleaner only at voltage specified on data plate on back of cleaner. ON/OFF pedal ON/OFF To move your deep cleaner from room to room, put handle in PEDAL upright and locked position, tilt deep cleaner back on wheels, and push forward. Plug deep cleaner into a properly grounded outlet. Step on pedal to turn deep cleaner on. Step on pedal again to turn deep cleaner off. Handle release pedal HANDLE RELEASE PEDAL
Inhaltszusammenfassung zur Seite Nr. 6
TANK CAP 5 OUNCES (carpet) Replace cap. Rotate cap clockwise until it locks in place. Cap must be locked in place for proper performance and to Turn cap upside down to serve as a measuring cup. prevent leaking. Using cap, measure detergent following the chart below. For carpet, carpeted stairs and upholstery: Fill cap to fill line (5 ounces) with HOOVER Carpet/Upholstery Detergent. For bare floors: Fill cap to fill line (5 ounces) with HOOVER Bare Floor Cleaner (available at additional cost if
Inhaltszusammenfassung zur Seite Nr. 7
How to use Before you begin cleaning a. Vacuum thoroughly - For carpet, use a vacuum cleaner REAR OF with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice TANK tool to reach into tufts and folds. Do not use the deep cleaner as a dry vacuum cleaner. b. For upholstery, check cleaning code - Use your HOOVER deep cleaner only if the upholstery fabric is marked with a “W” Unlatch back part of tank lid and remove lid. Empty tank.
Inhaltszusammenfassung zur Seite Nr. 8
After cleaning Cleaning carpet a. Allow carpet or upholstery to dry. To help prevent matting and Read “Before you begin cleaning” instructions on page 7. resoiling the carpet, keep children and pets away from surface until Fill clean solution tank (upper tank) according to instructions on it is completely dry. pages 5 and 6. Use 5 ounces of HOOVER Carpet/Upholstery If it is necessary to walk on damp carpet, place towels or white Detergent. cloths on the traffic areas. Dry hands and plug cord
Inhaltszusammenfassung zur Seite Nr. 9
Cleaning bare floors Some models come with the bare floor attachment. For others, the attachment is available at additional cost from your Autho- rized Hoover Dealer (Depot) or Hoover Factory Service Center. How to attach bare floor attachment Disconnect deep cleaner from electrical outlet. Push attachment against nozzle while rotating attachment downward until both ends “snap” into place. (Note: Some force may be required to rotate and snap attachment into place.) Return deep cleaner to uprigh
Inhaltszusammenfassung zur Seite Nr. 10
HANDLE TABS RELEASE PEDAL Step on handle release pedal and lower deep cleaner handle FRONT until it rests on the floor. Unlatch back part of recovery tank lid and remove lid. The tank lid replaces in a hinge-like manner. Position front of lid under tabs on front of tank. Rotate lid down onto tank. Make sure lid is secure on all sides before cleaning. FRONT For full suction, it is important that the recovery PANEL tank lid is properly secured before cleaning. Reverse procedure to remove hose an
Inhaltszusammenfassung zur Seite Nr. 11
CONVERTER Cleaning carpeted stairs Read “Before you begin cleaning” instructions on page 7. Attach hose and solution tube as instructed on pages 9 and 10. Fill clean solution tank according to instructions on pages 5 and 6. Use 5 ounces of HOOVER Carpet/Upholstery Detergent. Hose length may require that machine be placed at the top of CONVERTER the stairs to clean upper half of stairway and at bottom of stairs CLIP to clean lower half. To prevent machine from falling, use extra caution when Occ
Inhaltszusammenfassung zur Seite Nr. 12
Storage Cleaning upholstery and Before storing: automobile interiors • Empty solution tank and rinse thoroughly with clean water. Read “Before you begin cleaning” instructions on page 7. • Replace empty solution tank and turn deep cleaner Be sure to check the cleaning code on your upholstery. Use ON. Squeeze trigger and push deep cleaner forward your deep cleaner only on upholstery marked “W” or “W/S”. and back several times to expel any solution remaining in the deep cleaner’s system. (Do not
