Bedienungsanleitung Euro-Pro V2022

Inhaltszusammenfassung zur Seite Nr. 1

2 Speed Cordless Sweeper
Model: V2022
6 Volt DC
To Maximize the life of your NiCd batteries:
1. Charge for a minimum of 20 hours before initial use.
Failure to do so will reduce the product’s battery life
significantly.
2. Do not store unit with the charging adapter attached
and plugged in.
3. Only recharge when the batteries are fully discharged
(or as close to fully discharged as possible).
4. Do not store in areas of high temperature or humidity.
5. After 3 months of non-use, the product

Inhaltszusammenfassung zur Seite Nr. 2

Inhaltszusammenfassung zur Seite Nr. 3

Model IMPORTANT SAFEGUARDS V2022 When using an electrical appliance, basic safety precautions should always be observed, including the following ONE (1) YEAR LIMITED WARRANTY READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS SWEEPER. EURO-PRO Operating LLC warrants this product to be free from defects in material and WARNING: To reduce the risk of fire, electrical shock, or injury: workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal house

Inhaltszusammenfassung zur Seite Nr. 4

PARTS AND COMPONENTS TROUBLESHOOTING 1. Handle PROBLEM POSSIBLE REASON POSSIBLE SOLUTION 2. Telescopic Tube 1. Charge unit. 3. Dust Cup Empty Button 2. Check fuse or breaker. 4. Lower Handle Extension Tube Replace fuse/reset breaker. 1. Batteries discharged. 5. Steering Pivot 2. No power in electrical 3. Call Customer Service at outlet supplying charging 1 (800) 798-7398. 6. Charging Light Indicator SWEEPER WILL 4. Ensure that the wire terminal adapter. 7. On/Off Switch NOT OPERATE

Inhaltszusammenfassung zur Seite Nr. 5

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 8. Slip the belt over the brush bar cap. Assembling Your Cordless Sweeper 9. Insert the brush bar into the slot. (Fig. 14) Your cordless sweeper will require very little assembly. You should remove it from 10. Insert the gear box tabs into the tab slots and push down until it clicks into place. the carton and familiarize yourself with all the components listed per the exploded 11. To replace the squeegee, follow instructions above for removing the

Inhaltszusammenfassung zur Seite Nr. 6

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 4. The telescopic tube is designed to adjust to the height that is comfortable for all Changing The Rotating Brush, Gear Box & Squeegee users. To adjust the height, simply push down the release button on the telescopic 1. Remove the extension tube handle from the sweeper power head. tube and pull the handle to adjust to a comfortable height for using. (Fig. 2) 2. Turn the sweeper power head upside down being careful not to accidentally turn the

Inhaltszusammenfassung zur Seite Nr. 7

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Cleaning the Dust Cup Container To Maximize The Life Of Your Ni-cd Batteries To achieve the best performance, empty the dust cup container after each use. 1. Charge for a minimum of 20 hours before initial use. Failure to do so will reduce 1. Press the dust cup release lever with your foot. (Fig. 9) the product’s battery life significantly. Note: Be careful not to accidentally turn the unit “On” 2. Do not store the unit with the charging adaptor at

Inhaltszusammenfassung zur Seite Nr. 8

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Removal of Battery Pack How To Operate Your Cordless Sweeper 1. Press the dust cup release lever with your foot and remove it from the sweeper 1. Before using, please ensure that the cordless sweeper has been initially power head. charged for 20 hours. 2. Turn unit over so that the base is facing upwards. Be careful not to turn the unit Your cordless sweeper will only operate properly when the batteries are fully ON. charged. Your sweeper will op